DOI QR코드

DOI QR Code

Failure of lightweight aggregate concrete-filled steel tubular columns

  • Ghannam, Shehdeh (Wadi Seer Engineering College, Balqa' Applied University) ;
  • Jawad, Yahia Abdel (Faculty of Engineering and Technology, University of Science and Technology) ;
  • Hunaiti, Yasser (Faculty of Engineering and Technology, University of Jordan)
  • 투고 : 2003.08.26
  • 심사 : 2004.02.03
  • 발행 : 2004.02.25

초록

Tests on steel tubular columns of square, rectangular and circular section filled with normal and lightweight aggregate concrete were conducted to investigate the failure modes of such composite columns. Thirty-six full scale columns filled with lightweight and normal weight aggregate concrete, eighteen specimens for each, were tested under axial loads. Nine hollow steel sections of similar specimens were also tested and results were compared to those of filled sections. The test results were illustrated by a number of load-deflection and axial deformation curves. The results showed that both types of filled columns failed due to overall buckling, while hollow steel columns failed due to bulging at their ends (local buckling). According to the above-mentioned results, and due to low specific gravity and thermal conductivity of the lightweight concrete the further interest should be concentrated in replacing the normal concrete by the lightweight aggregate concrete.

키워드

참고문헌

  1. Brauns, J. (1998), "Analysis of stress state in concrete-filled steel column", J. Constructional Steel Research 49(1999), 189-196.
  2. Chapman, J.C. and Neogi, P.K. Progress to Oct.31, (1964), Research on Concrete-Filled Steel Tubular Column, 1-26.
  3. Ghannam, S.M. (2001), "Behavior of lightweight concrete-filled steel tubular columns", PhD Thesis, University of Jordan.
  4. Hunaiti, Y.M. (1997), "Strength of composite sections with foamed and lightweight aggregate concrete", ASCEJ. Materials in Civil Enggs., 9(2), 58-61. https://doi.org/10.1061/(ASCE)0899-1561(1997)9:2(58)
  5. Ramamurthy, L.N. and Srinivasan, C.N. Salani and Sims, Chapman and Neogi, Gardner and Jacobson. (1978), "Behavior of concrete infilled tubular columns", J. of Instn. of Engrs, India, 58, 1-16.
  6. Sabalieish, A. (1988), "The feasibility of producing and developing lightweight concrete from local Jordanian raw materials", Rep. (in Arabic), Royal Scientific Society (RSS), Amman-Jordan, 69-73.

피인용 문헌

  1. Complex Edge Stiffeners for Thin-Walled Members vol.132, pp.2, 2006, https://doi.org/10.1061/(ASCE)0733-9445(2006)132:2(212)
  2. Internal curing effect on strength of recycled concrete and its enhancement in concrete-filled thin-wall steel tube vol.153, 2017, https://doi.org/10.1016/j.conbuildmat.2017.07.117
  3. Combined strength of lightweight aggregate concrete-filled steel tube vol.19, pp.sup5, 2015, https://doi.org/10.1179/1432891714Z.0000000001217
  4. Experimental investigation on lightweight concrete-filled cold-formed elliptical hollow section stub columns vol.115, 2015, https://doi.org/10.1016/j.jcsr.2015.08.029
  5. Behaviour and design calculations on very slender thin-walled CFST columns vol.53, 2012, https://doi.org/10.1016/j.tws.2012.01.011
  6. FLEXURAL BEHAVIOUR OF CONCRETE‐FILLED STEEL HOLLOW SECTIONS BEAMS vol.14, pp.2, 2008, https://doi.org/10.3846/1392-3730.2008.14.5
  7. Performance of lightweight aggregate and self-compacted concrete-filled steel tube columns vol.25, pp.3, 2004, https://doi.org/10.12989/scs.2017.25.3.299
  8. Mechanical performance of sand-lightweight concrete-filled steel tube stub column under axial compression vol.69, pp.6, 2019, https://doi.org/10.12989/sem.2019.69.6.627
  9. Bearing Capacity of Stone-Lightweight Aggregate Concrete-Filled Steel Tubular Stub Column Subjected to Axial Compression vol.23, pp.7, 2004, https://doi.org/10.1007/s12205-019-2287-0
  10. Prediction of Ultimate Load of Rectangular CFST Columns Using Interpretable Machine Learning Method vol.2020, pp.None, 2004, https://doi.org/10.1155/2020/8855069
  11. Optimization of Artificial Intelligence System by Evolutionary Algorithm for Prediction of Axial Capacity of Rectangular Concrete Filled Steel Tubes under Compression vol.13, pp.5, 2004, https://doi.org/10.3390/ma13051205
  12. Performance of Lightweight Concrete with Expansive and Air-Entraining Admixtures in CFST Columns vol.32, pp.6, 2004, https://doi.org/10.1061/(asce)mt.1943-5533.0003143
  13. A Novel Hybrid Model Based on a Feedforward Neural Network and One Step Secant Algorithm for Prediction of Load-Bearing Capacity of Rectangular Concrete-Filled Steel Tube Columns vol.25, pp.15, 2004, https://doi.org/10.3390/molecules25153486
  14. Axial behavior of steel reinforced lightweight aggregate concrete columns: Analytical studies vol.38, pp.2, 2004, https://doi.org/10.12989/scs.2021.38.2.223
  15. Analytical Modelling of LACFCST Stub Columns Subjected to Axial Compression vol.9, pp.9, 2021, https://doi.org/10.3390/math9090948
  16. Ultimate axial capacity prediction of CCFST columns using hybrid intelligence models - a new approach vol.40, pp.3, 2021, https://doi.org/10.12989/scs.2021.40.3.461
  17. Evaluation of the ultimate eccentric load of rectangular CFSTs using advanced neural network modeling vol.248, pp.None, 2004, https://doi.org/10.1016/j.engstruct.2021.113297