A Study on Thermal Performance Analysis of the Sustainable Clayed Hollow Block Wall

친환경 점토질 다공블럭 벽체의 열성능 분석 연구

  • Published : 2004.09.10

Abstract

The purpose of this study is to analysis the thermal performance of the clayed hollow block wall. Its thermal performance was evaluated comparison with the cement block wall, it was generally used in building envelope. To that end, we conducted a insulation performance experiment and heating and cooling load simulation for a respective wall. In addition, we calculated a construction cost for each other's wall. The results of this study can be summarized as follows. (1) According to experiment of a insulation performance, coefficient of overall heat transmission of the cement block wall and clayed hollow block wall was calculated respectively $2.72W/^2K$ and $1.42W/^2K$. (2) The annular load saving of the clayed hollow block wall was evaluated 1.5% larger than its of the cement block wall. (3) The construction cost of the clayed hollow block wall was calculated 73% more expensive than its of the cement block wall. (4) The construction cost of the clayed hollow block composite wall was calculated 13.7% more expensive than its of the cement block composite wall.

Keywords

References

  1. R.C. Valore, Jr.,'Calculation of U-value of hollow concrete masonry',American concrete institute, 1980
  2. H.S. Carslaw and J.C.Jaeger, 'Conduction of Heat in Solids', Oxford University Press., Oxford, 1959
  3. Rohsenow, Hartnett. Ganic, 'Handbook of Heat Transfer Fundamentals', MeGraw-hill, 1985
  4. Rules THK77, Rules for calculating practical thermal properties of structural components, SCTB, 1977
  5. J. Fricker,'Computational Analysis Of Reflective Air Spaces', AIRAH Journal, 1997
  6. ASHRAE Handbook - 1993 Fundamentals, Chapter 20.7 - Thermal Insulation and Vapor Retarders- Fundamentals, Factors Affecting Heat Transfer Across Air Spaces, American Society of Heating, Refrigeration and Air-conditioning Engineers, Inc
  7. ASTM C 518-98, 'Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus', 2001 Annual Book of ASTM Standards, Vol. 04.06, 2001, pp.174-185