Korean Journal of Materials Research (한국재료학회지)

Materials Research Society of Korea (한국재료학회)
권호 표지
DOI QR코드

DOI QR Code

Characterization of Manufacturing Process of Metal Fibers of Stainless Steel and Titanium

스테인레스 스틸 극세사와 Ti 극세사 제조 특성 평가

  • Kim T. H. (Dept. of Advanced Materials Engineering, Sungkyunkwan Univ.) ;
  • Ko J. H. (Dept. of Advanced Materials Engineering, Sungkyunkwan Univ.) ;
  • Lee D. B. (Dept. of Advanced Materials Engineering, Sungkyunkwan Univ.)
  • 김태화 (성균관대학교 금속재료공학부) ;
  • 고재황 (성균관대학교 금속재료공학부) ;
  • 이동복 (성균관대학교 금속재료공학부)
  • Published : 2005.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

Stainless steel fibers with a diameter of $17\;{\mu}m$ and 630 nm were produced from stainless steel wires by the drawing/annealing/exfolitation process. The suitable sheath material to draw the core stainless steel wires to fibers was the Cu coating. The low melting metal of Zn was not a suitable sheath coating. Also, an attempt was made to produce $20\;{\mu}m{\Phi}Ti$ fibers from the core titanium wires. The main obstacles in producing Ti fibers were their resistance to deformation owing to the Ti's hop structure, and high reactivity of Ti with the exfolitation solution.

Keywords

References

  1. W. Liu, Z. Zeng and D. Ming, J. Mater. Proc. Technol., 142, 562 (2003) https://doi.org/10.1016/S0924-0136(03)00660-5
  2. A. Hochberg and J. Versieck, Plastic Additves & Compounding, 3, 24 (2001) https://doi.org/10.1016/S1464-391X(01)80101-X
  3. H. Jang, K. Ko, S. J. Kim, R. H. Basch and J. W. Fash, Wear, 256, 406 (2003) https://doi.org/10.1016/S0043-1648(03)00445-9
  4. D. I. Kim, S. G. Kim and H. J. Choi, J. of the Korean Inst. Met. & Mater., 33, 928 (1995)
  5. Y. D. Hahn and I. H. Song, Bulletin of the Korean Inst. of the Mat. & Mater., 10, 737 (1997)