Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Fabrication and Static Bending Test in Ultra Light Inner Structured and Bonded(ISB) Panel Containing Repeated Inner Pyramidal Structure

피라미드 형상의 내부구조를 가지는 초경량 금속 내부구조 접합판재의 제작 및 정적 굽힘실험

  • 정창균 (한국과학기술원 기계공학과 대학원) ;
  • 윤석준 (한국과학기술원 기계공학과 대학원) ;
  • 이상민 (한국과학기술원 기계공학과 대학원) ;
  • 나석주 (한국과학기술원 기계공학과) ;
  • 이상훈 (조선대학교 공과대학 기계공학과 대학원) ;
  • 안동규 (조선대학교 공과대학 기계공학과) ;
  • 양동열 (한국과학기술원 기계공학과)
  • Published : 2005.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

Inner structured and bonded panel, or ISB Panel, as a kind of sandwich type panel, has metallic inner structures which have low relative density, because of their dimensional shape of metal between a pare of metal skin sheets or face sheets. In this work, ISB panels and inner structures formed as repeated pyramidal shapes are introduced. Pyramidal structures are formed easily with expanded metal sheet by the crimping process. Three kinds of pyramidal structures are made and used to fabricate test specimen. Through the multi-point electrical resistance welding, inner structures are bonded with skin sheet. 3-point bending tests are carried out to measure the bending stiffness of ISB panel and experimental results are discussed.

Keywords

References

  1. Gibson, L. J., Ashby, M. F., 'Cellular solids-structure and properties,' Cambridge University Press, second edition, 2001
  2. Wadley, H. N. G., Fleck, N. A. A., Evans, A.G., 'Fabrication and structural performance of periodic cellular metal sandwich structures,' Composites Science and Technology, Vol. 63, Issue 16, pp. 2331-2343, 2003 https://doi.org/10.1016/S0266-3538(03)00266-5
  3. Wicks, N., Hutchison, J. W., 'Optimal truss plates,' International Journal of Solids and Structures, Vol. 38, pp.5165-5183, 2001 https://doi.org/10.1016/S0020-7683(00)00315-2
  4. Wang, J., Evans, A. G., Dharmasena, K., Wadley, H.N.G., 'On the performance of truss panel with Kagome cores,' International Journal of Solids and Structures, Vol. 40, pp.5165-5183, 2003 https://doi.org/10.1016/S0020-7683(03)00349-4
  5. Liu, J.S., Lu, T. J., 'Multi-objective and multi-loading optimization of ultralightweight truss materials,' International Journal of Solids and Structures, Vol. 41, pp.619-635, 2004 https://doi.org/10.1016/j.ijsolstr.2003.10.003
  6. Kang, K. J., Jeon, G. P., Nah, S. J., Ju, B. S., Hong, N. H., 'A new way to manufacture Ultra light metal structures,' Trans. KSME, Vol. A, No.8, pp. 296-303, 2004 https://doi.org/10.3795/KSME-A.2004.28.3.296
  7. Ashby, M. F., Evans A.G., Fleck, N. A., Gibson, L. J., Hutchinson, J. W., Wadley, H.N.G., 'Metal Forms; A design guide, Butterworth-Heinemann, 2000
  8. KS D3601, 'Expanded metal', 1993
  9. Lee, S.M., Kim, J.T., Na, S.J., ' A study on multi points electrical resistance welding,' Proceedings of the spring meeting of Korean Welding Society, Vol. 42, pp.30-32, 2004
  10. Jung, C. G., Yoon, S. J., Seong, D. Y., Yang, D. Y., Ahn, D. G., 'Analysis of design parameter in Ultra light inner structured and bonded metal panel made of the metallic pyramidal structure,' Proceedings of the KSPE Spring meeting, pp.928-931 , 2004
  11. Zenkert, D., 'The handbook of Sandwich Construction,' EMAS publishing, 1997
  12. ASTM E270 'Standard test method for semi-guided bend test for ductility of metallic materials,' 1995
  13. Ahn, D. G., Lee, S. H., Kim, M. S., Hahn, G. Y., Jung, C.G., Yang, D. Y., 'Mechanical properties of CSP 1N sheet metal and development of a tensile test method for woven wire structured materials,' Proceedings of the KSPE spring eeting, pp.977-980, 2004