Journal of Korea Technical Association of The Pulp and Paper Industry (펄프종이기술)

Korea Technical Association of the Pulp and Paper Industry (한국펄프종이공학회)
권호 표지

The Influence of Paper Stock Type on Characteristics of Sizing

지료조성에 따른 종이의 사이징 특성

  • Cheong Sang Jin (Department of wood Science and Technology, Kyungpook National University) ;
  • Kim Bong Yong (Department of wood Science and Technology, Kyungpook National University)
  • 정상진 (경북대학교 농업생명과학대학 임상공학과) ;
  • 김봉용 (경북대학교 농업생명과학대학 임상공학과)
  • Published : 2005.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study was carried out to investigate the influence of paper stock type and heat treatment on sizing effect. Various types of pulps were used to make handsheets sized internally with AKD(alkyl ketene dimer) and externally with CMC(carboxyl methyl cellulose). Most of the handsheets were treated with heat by dry oven $(100^{\circ}C,\;30min)$ to evaluate the effect of heat treatment on sizing development. Internal sizing development of newsprint was very bad, but the effect of heat treatment was much higher than those of NBKP, BCTMP. In case of surface sizing, newsprint was more effective compared to the other pulps. Considering above mentioned results, it seems that internal sizing slows down water into paper by molecular diffusion much more than capillary penetration, but surface sizing slows down capillary penetration. With regard to density, a higher thickness sheets showed high heat treatment effect on sizing, therefore it assumed that heat treatment effect on sizing had very close relationship with sheet density.

Keywords

References

  1. Lindstrom, T. and Soderberg, G., On the mechanism of sizing with alkylketene dimers, Nordic Pulp Paper Science. J., 1(1):26 (1986) https://doi.org/10.3183/NPPRJ-1986-01-01-p026-033
  2. Isogai, A., Effect of cationic polymer addition on retention of alkylketene dimer, Journal of Pulp and Paper Science, 23(6):J276 (1997)
  3. Kim, B. Y. and Isogai, A., Alkylketene dimer sizing of mechanical pulp, Appita J., 54(2): 116 (2001)
  4. Isogai, A., Mechanisum of paper sizing by alkylketene dimers, Journal of Pulp and Paper Science, 25(7):251 (1999)
  5. Dumas, D.H., An overview of cellulose reactive sizes, Tappi, 64(1) (1981)
  6. Huang, T. and Lepoutre, P., Effect of basestock surface structure and chemistry on coating holdout and coated paper properties, Tappi, 81(8):145-152 (1998)
  7. 신동소 외, 제지과학, 광일문화사 (1996)
  8. Marton, J., Practical aspects of alkaline sizing, Tappi, 74(8):187-192 (1991)
  9. Marton, J. and Marton, T., Effect of fillers on rosin sizing of paper, Tappi, 66(12) (1983)
  10. Shimada, K., Dumas, D. and Biermann, C. J., Properties of candidate internal sizing agents versus sizing performance, Tappi, 80(10): 171-184 (1997)
  11. Kim, B.Y. and Bousfield, D.W., Characterization of base paper properties on coating penetration, J. of KTAPPI, 35(5): 17-25 (2003)