Journal of Mechanical Science and Technology

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지

A Theoretical Comparison of Two Possible Shape Memory Processes in Shape Memory Alloy Reinforced Metal Matrix Composite

  • Lee Jae Kon (School of Mechanical and Automotive Engineering, Catholic University of Daegu) ;
  • Kim Gi Dae (School of Mechanical and Automotive Engineering, Catholic University of Daegu)
  • Published : 2005.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

Two possible shape memory processes, austenite to detwinned martensite transformation and twinned martensite to detwinned martensite transformation of a shape memory alloy have been modeled and examined. Eshelby's equivalent inclusion method with Mori-Tanaka's mean field theory is used for modeling of the shape memory processes of TiNi shape memory alloy reinforced aluminum matrix composite. The shape memory amount of shape memory alloy, plastic strain and residual stress in the matrix are computed and compared for the two processes. It is shown that the shape memory amount shows differences in a small prestrain region, but the plastic strain and the residual stress in the matrix show differences in the whole prestrain region. The shape memory process with initially martensitic state of the shape memory alloy would be favorable to the increase in the yield stress of the composite owing to the large compressive residual stress and plastic strain in the matrix.

Keywords

References

  1. Auricchio, A., Marfia, S. and Sacco, E., 2003, 'Modeling of SMA Materials: Training and Two way Memory Effects,' Computers and Structures, Vol. 81, pp. 2301-2317 https://doi.org/10.1016/S0045-7949(03)00319-5
  2. Brinson, L. C., 1993, 'One-Dimensional Constitutive Behavior of Shape Memory Alloys: Thermomechanical Derivation with Non-Constant Material Functions and Redefined Martensite Internal Variable,' J. Intell. Material Syst. and Struct., Vol. 4, pp. 229-242 https://doi.org/10.1177/1045389X9300400213
  3. Cherkaoui, M., Sun, Q. P. and Song, G. Q., 2000, 'Micromechanics Modeling of Composite with Ductile Matrix and Shape Memory Alloy Reinforcement,' Int. J. of Solids and Structures, Vol. 37, pp. 1577-1594 https://doi.org/10.1016/S0020-7683(98)00332-1
  4. Dye, T. E., 1990, 'An Experimental Investigation of the Behavior of Nitinol,' MS thesis, Virginia Tech
  5. Eshelby, J. D., 1957, 'The determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems,' Proc. of the Royal Society of London, Vol. A241, pp. 376-396 https://doi.org/10.1098/rspa.1957.0133
  6. Furuya, Y., Sasaki, A. and Taya, M., 1993, 'On Enhanced Mechanical Properties of TiNi Shape Memory Fiber/A1 Matrix Composite,' Mater. Trans. JIM, Vol. 34, pp. 224-227 https://doi.org/10.2320/matertrans1989.34.224
  7. Hamada, K., Lee, J.H., K. Mizuuchi, K., Taya, M. and Inoue, K., 1998, 'Thermomechanical Behavior of TiNi Shape Memory Alloy Fiber Reinforced 6061 Aluminum Matrix Composite,' Metallurgical and Materials Transactions A, Vol. 29A, pp. 1127-1135 https://doi.org/10.1007/s11661-998-0305-9
  8. Lee, W. B., Jie, M. and Tang, C. Y., 2001, 'Constitutive Modeling of Aluminum Matrix NiTi Fiber-Reinforced Smart Composite,' J. of Materials and Processing Technology, Vol. 116, pp. 219-223 https://doi.org/10.1016/S0924-0136(01)01051-2
  9. Lee, J. K., Kim, J. G. and Kim, G. D., 2004, 'An Analytical Study on Prestrain and Shape Memory Effect of Composite Reinforced with Shape Memory Alloy,' The Korean Society for Composite Materials, Vol. 17, No. 5, pp. 54-60
  10. Liang, C. and Rogers, C. A., 1990, 'One-Dimensional Thermomechanical Constitutive Relations for Shape Memory Materials,' J. of Intell Mater. Syst. and Struct., Vol. 1, No. 2, pp. 207-234 https://doi.org/10.1177/1045389X9000100205
  11. Liu, Y., Li, Y., Ramesh, K. T. and Humbeeck, J. V., 1999, 'High Strain Rate Deformation of Martensitic NiTi Shape Memory Alloy,' Scripta Materialia, Vol. 41, No. 1, pp. 89-95 https://doi.org/10.1016/S1359-6462(99)00058-5
  12. Mori, T. and Tanaka, K., 1973, 'Average Stress in the Matrix and Average Elastic Energy of Materials with Misfitting Inclusions,' Acta Metallurgica, Vol. 21, pp. 571-574 https://doi.org/10.1016/0001-6160(73)90064-3
  13. Park, Y. C., Park, D. S., Lee, J. H. and Lee, G. C., 2002, 'Fabrication and Characterization of TiNi Shape Memory Alloy Fiber Reinforced 6061 Aluminum Matrix Composite by Using Hot Press,' Trans. KSME A, Vol. 26, No.7, pp. 1223-1231 https://doi.org/10.3795/KSME-A.2002.26.7.1223
  14. Park, Y. C. and Lee, J. K., 2004, 'Fabrication and AE Characteristics of TiNi/A16061 Shape Memory Alloy Composite,' KSME Int. J., Vol. 18, No. 3, pp. 453-459
  15. Taya, M., Shimamoto, A. and Furuya, Y., 1995, 'Design of Smart Composites Based on Shape Memory Effect,' Proc. of ICCM-10, Vol. 5, pp. 275-282
  16. Yamada, Y., Taya, M. and Watanabe, R., 1993, 'Strengthening of Metal Matrix Composite by Shape Memory Effect,' Mater. Trans. JIM, Vol. 34, No. 3, pp. 254-260 https://doi.org/10.2320/matertrans1989.34.254