한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제22권7호
  • /
  • Pages.19-26
  • /
  • 2005
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

고출력 연속파형 Nd:YAG 레이저를 이용한 CSP 1N 냉연강판 절단시 공정변수의 절단폭에 미치는 영향

Influence of process parameters on the kerfwidth for the case of laser cutting of CPS 1N sheet using high power CW Nd:YAG laser

  • 김민수 (조선대학교 일반대학원 기계공학과) ;
  • 이상훈 (조선대학교 일반대학원 기계공학과) ;
  • 박형준 (조선대학교 산업공학과) ;
  • 유영태 (조선대학교 기전공학과) ;
  • 안동규 (조선대학교 기계공학과)
  • 발행 : 2005.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The objective of this study is to investigate the influence of process parameters, such as power of laser, cutting speed of laser and material thickness, on the practical cutting region and the kerfwidth fer the case of cutting of CSP IN sheet using high power Nd:YAC laser in continuous wave(CW) mode. In order to obtain the practical cutting region and the relationship between process parameters on the kerfwidth, several laser cutting experiments are carried out. The effective heat input is introduced to consider the influence of power and cutting speed of laser on the kerfwidth together. From the results of experiments, the allowable cutting region and the relationship between the effective heat input and kerfwidth fur the case of cutting of CSP 1N sheet using high power CW Nd:YAG laser have been obtained to improve the dimensionalaccuracyofthecutarea.

키워드

참고문헌

  1. Pollmann, W. and Becker, W., 'Laser-Assisted Manufacturing Technology in the 3rd Millennium,' Proceedings of the LANE 2001, pp. 39 - 54, 2001
  2. Larsson, J. K., 'The Mature Technique of Laser Processing in Body Manufacture - Long Term Production Experiences and Recent Developments,' Proceedings of the LANE 2001, pp. 55 - 74, 2001
  3. Geiger, M., 'Manufacturing Science-Driving Force for Innovation,' Advanced Technology of Plasticity 2002, Vol. 1, pp. 17 - 30, 2002
  4. Ready, J. F., 'Industrial Applications of Lasers,' Academic Press, San Diego CA U.S.A., pp.315-417, 1997
  5. Caristan, C. L., 'Laser Cutting ; Guide for Manufacturing,' Society of Manufacturing Engineers, Dearborn Michigan U.S.A., pp.3-54, 2004
  6. Wollermann-Windgassse, R. and Schinzel, C., 'Laser Technology in Manufacturing-State of the Art at the Beginning of the 21st Century,' Proceedings of the LANE 2001, pp. 87 - 102, 2001
  7. http://www.trumpf.com
  8. Yang, Y. S., Na, S. J., Kim, W. B. and Kim, T. K., 'Influence of Cutting Pressure on Laser Cut Quality,' Journal of the Korea Society of Precision Engineering, Vol.5, No.1, pp.63-70, 1988
  9. Na, S. -J., Yang, Y. -S., Koo, H. -M. and Kim, T. -K., 'Effect of Shielding Gas Pressure in Laser Cutting of Sheet Metals,' Transactions of the ASME ; Journal of Engineering Materials and Technology, Vol. 111, pp.314-318, 1989 https://doi.org/10.1115/1.3226472
  10. Park, J. H., Han, G. C. and Na, S. J., 'A Study on Cutting Mechanism and Heat Transfer Analysis in Laser Cutting Process,' Transactions of the Korean Society of Mechanical Engineers, Vol.17, No. 10, pp.2418-2425, 1993
  11. Yilbas, B. S., 'Experimental investigation into CO2 laser cutting parameters,' Journal of Materials Processing Technology, Vol.58, pp.323-330, 1996 https://doi.org/10.1016/0924-0136(95)02094-2
  12. Yilbas, B. S., 'Effect of Process Parameters on the Kerfwidth during the Laser Cutting Process,' Proceedings of the Institution of Mechanical Engineer Part B; Journal of Engineering Manufacture, Vol.215, pp.1357-1365, 2001 https://doi.org/10.1243/0954405011519132
  13. Aloke, R., Girrish, V., Scrutton, R. F. and Molian, P. A., 'A Model for Prediction of Dimensional Tolerances of Laser Cut Holes in Mild Steel Thin Plates,' International Journal of Machine Tools & Manufacture, Vol.37, pp.1069-1087, 1997 https://doi.org/10.1016/S0890-6955(96)00090-9
  14. Dorn, L., Lee, K. L., Munasinghe, N., 'Nd:YAG Laser Cutting of Amorphous Alloys,' DVS-Berichte, Vol. 163, pp.447-455, 1994
  15. Naeem, M., Matthews, M., Ingram, S., 'Parametric Study of Laser Cutting of Steel Using 1.5kW Continuous Wave Nd:YAG Laser,' Proceedings of Laser Materials Processing Conference, pp.152-158, 1999
  16. Chen, S. L., 'The effects of high-pressure assistant-gas flow on high-power $CO_2$ laser cutting,' Journal of Materials Processing Technology, Vol. 88, pp.57-66, 1999 https://doi.org/10.1016/S0924-0136(98)00402-6