The high Efficiency Ballast for MHD Lamp with a Frequency Controlled Synchronous Rectifier

주파수 가변 동기 정류기를 이용한 고효율 MHD 램프 안정기

  • 현병철 (서울대 전기컴퓨터공학부) ;
  • 이인규 (서울대 전기컴퓨터공학부) ;
  • 조보형 (서울대 전기컴퓨터공학부)
  • Published : 2005.08.01

Abstract

In this paper, in order to develop a simple and high efficient ballast without an external ignitor, a half-bridge type ballast with a coupled inductor and a frequency controlled synchronous rectifier is proposed. The Internal LC resonance of the buck converter is used to generate a high voltage pulse for the ignition, and the coupled inductor filter is used for steady state ripple cancellation. Also, a synchronous buck converter is applied for the DC/DC converter stage. In order to improve the efficiency of the ballast, a frequency control method is proposed. This scheme reduces a circulation current and trun off loss of the MOSFET switch on the constant power operation, which results in increase of the efficiency of the ballast system about 4$\%$, compared to a fixed frequency control. It consists a 2-stage version ballast with a PFC circuit. The results are verified nth hardware experiments.

본 논문에서는 외부 이그니터가 없는 간단한 고효율 안정기를 만들기 위해 커플 인덕터와 주파수가변. 동기 정류기를 이용한 하프 브리지 방식의 안정기를 제안한다. 램프 점등시 고압을 발생시키기 위해 벅 컨버터 내부의 LC 공진이 사용되었고, 정상상태의 리플을 줄이기 위해 커플 인덕터가 사용되었다. DC/DC컨버터로는 동기형 벅 컨버터가 사용되었다. 안정기의 효율을 높이기 위해 가변 주파수 방식을 제안하였다. 이 방식은 순환 전류와 정전력 동작 하에서 MOSFET 스위치의 턴 오프 손실을 감소 시켜 고정 주파수 방식에 비해 안정기 효율을 약 4$\%$ 향상 시킨다. 회로 구성은 PFC와 안정기 2단으로 구성된다 결과는 실험을 통하여 검증된다.

Keywords

References

  1. H.J. Faehnrich and E. Rasch, ' Electronics Ballasts for Metal Halide Lamps', Joumal of the Illuminating Engineering Society, pp131-140,Summer,1988
  2. Kyu-Chan Lee,B.H. Cho, ' Design and analysis of automotive HID lamp ballast system using auxiliary winding', PESC00. pp.544-549 Vol.l
  3. H.Nishimura, H.Nagase, K.U. chihashi, T.Shiomi, M. Fukuhara, 'A New Electronic Ballast for HID Lamps', Journal of the illuminating Engineering Society, pp.70-76,Summer,1998
  4. Yiyoung Sun, Takeshi Goriki, 'Driving Circuit For Hight intensity Discharge Lamp Electronic Ballast', US patent 6,020,691
  5. S.Cuk and R.D. Middlebrook, 'Advances in Switch-Mode Power Conversion',Pasadena, CA: Tesla Co, Vol. I-III,1983
  6. Henze, C.P., Martin, H.C , Parsley, D.W. 'Zero-voltage switching in high frquency power converters using pulse width modulation',APEC88, pp.33-40
  7. Djekic, O., Brkovic, M,Roy, 'A High frequency synchronous buck converters for low voltage applications', PESC98, pp.1248-1254 Vol.2
  8. Byoung-Chul Cho, S.J .Moon, I.K. Lee and B.H. Cho, 'A New HID Lamp Ballast using Internal LC resonance and Coupled Inductor Filter', ICPE2001, pp.737-740