Tribology and Lubricants

Korean Tribology Society (한국트라이볼로지학회)
권호 표지
DOI QR코드

DOI QR Code

An Influence of Frictional Factors on the Friction Characteristics of Automobile Transmission Gear Materials by using Design of Experiment

실험계획법을 이용한 자동차 트랜스미션 기어용 소재의 마찰특성에 미치는 마찰인자의 영향

  • Park Heung-sik (Division of Mechanical Engineering, Donga University) ;
  • Bae Hyo-jun (Division of Mechanical Engineering, Donga University) ;
  • Lee Sang-Jae (Division of Mechanical Engineering, Donga University) ;
  • Lee Chan-kyu (Dept. of Mechatronics, Koje College) ;
  • Kim Young-Hee (Division of Metallurgical & Chemical Engineering, Donga University)
  • Published : 2005.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

The fault of an automobile transmission gear occurs whenever moving tooth surfaces interact. Such a failure condition has an effect on the frictional factors such as applied load, sliding speed, frictional time and gear oil. However, it is difficult to know the mutual relation of these factors. In this study, the friction and wear tests were carried out to get the friction characteristics with carburized SCM420 and nitrocarburized NT100 have being used as automobile transmission gear materials. And it was undertaken to analyze the frictional factors that have effect on frictional characteristics by using design of experiment. From this study, the result showed that the applied load in frictional factors was the most important, next to frictional time, sliding speed. And the friction characteristics of nitrocarburized NT100 was more excellent than carburized SCM420.

Keywords

References

  1. 박순철, '기어의 손상과 대책,' 월간기계설계, pp. 44-54, 1990
  2. T. Bell, 'Gaseous and Plasma Nitrocarburising,' ASM Handbook, Vol. 4, ASM International, pp. 425-­436, 1991
  3. Y. Koetal, 'Measurements of Power Losses in Auto­mobile Drive Train,' SAE., Paper, 1988
  4. T. Bell, 'Gaseous and Plasma Nitrocarburising', ASM Handbook, Vol. 4, ASM International, pp. 425­-436, 1991
  5. 박성현, '실험계획법,' 민영사, 2002
  6. R. E. Bechhofer and C. W. Dunnett, 'Percentage points of multivariate Student distributions,' Selected Tables in thematical Studies, American Mathematical Society, Providence, R. I., Vol. 11, pp. 57-87, 1988
  7. M. B. Brown and A. B. Forsythe, 'Journal of the American Statistical Association,' Vol. 69, pp. 364-367. 1974 https://doi.org/10.2307/2285659
  8. H. L. Harter, 'Order Statistics and Their Uses in Testing and Estimation,' U. S. Government Printing Office, Washington D.C., Vol.1, pp. 78-102, 1970
  9. A. J. Hayter, 'A proof of the conjecture that the Tukey-Kramer multiple comparisons procedure is conservative,' Annals of Statistics, Vol. 12, pp. 61-75. 1984 https://doi.org/10.1214/aos/1176346392
  10. 박재상, 류을현, 김동호, 김영희, 박흥식, '표면개질에 따른 자동차 트랜스미션 기어의 내마멸성 평가,' 한국윤활학회, 제19권 제2호, pp. 78-84, 2003
  11. G. Taguchi, 'Introduction to Quality Engineering,' American Supplier Institute, Inc., Michigan, pp. 58­-110, 1987