Temperature Compensation of 8 Channel DWDM Multiplexer Using All Optical fiber Mach-Zehnder Structure

전광섬유형 8채널 DWDM용 광다중화기의 온도보상 특성

  • Published : 2005.08.01

Abstract

In this paper, Passive Temperature Compensation Technology is apply to 8-channel Optical multiplexer with 1000Hz channel spacing. The 8-channel multiplexer is fabricated by connecting three cascaded Mach Zehnder Interferometer(MZI) of optical fiber type, and each interferometer has the wavelength interval of 100GHz, 2000Hz and 4000Hz, respectively. Furthermore, to acquire uniform insertion loss, it is fabricated by using Wavelength Flatten Coupler(WFC) in which the variation of insertion loss is low. $CO_2$ laser to adjust precisely the wavelength. The optical fiber is very sensitive in the thermal variation around. Thus, When fabrication the prototype, it is applied a technique to compensate the optical thermal effect because the center wavelength at the output is shifted according to the thermal variation around. In summary, The prototype composed by eight cascaded MZI has an insertion loss of 5.5 dB, the bandwidth of 0.8nm at 0.5 dB point, and channel crosstalk of 25 dB. Furthermore, the loss dependent on polarization is measured as 0.06dB. Consequently, the output wavelength is shifted within 0.05 m when the surrounding temperature varies until $60^{\circ}C$

온도보상 패키지를 적용하여 1000Hz 채널간격을 갖는 DWDM용 8채널 광다중화기를 제작하였다. 8채널 광다중화기는 전광섬유형 Mach Zehnder 간섭계(MZI)를 3단으로 다단 연결하여 제작되었으며, 광 다중화기 채널별 출력파장의 삽입손실을 균일하게 하기 위하여 파장에 대한 삽입손실변화가 적은 파장무의존형 커플러(WFC)를 이용하여 전광섬유형 MZI를 제작하였다. 전용 제작 장치를 이용하여, 전광섬유형 MZI를 제작하였으며, 미세한 파장을 조절하기 위해서, $CO_2$ 레이저를 이용하였다. 광 다중화기의 출력중심파장이 주위온도변화에 영향을 받지 않도록 하기 위해서 별도의 외부 온도제어기를 사용하지 않은 온도보상 패키지가 적용되었다. 제작된 8채널 광 다중화기는 평균 삽입손실 2.1dB, 5.5dB에서의 통과대역폭이 0.8nm 이며, 2.1dB의 채널 Crosstalk를 갖는 특성을 얻을 수 있었다. 이때 편광의존 손실은 0.06dB이며, $60^{\circ}C$ 정도의 주위온도 변화에 대해서 출력파장 0.05nm이내에서 변하도록 제작할 수 있다.

Keywords

References

  1. DWDM Filter Module Global Market Forecast, Electroni Cast, 1997
  2. J. Noda, I. Yokohama, K. Okamoto, 'Single mode fiber devices', Optoelectronics Devices and Technologies, vol. 1, pp. 175-194, 1986
  3. D. B. Mortimore: 'Wavelength flattened 8 * 8 single mode star coupler', Electron. Lett., Vol. 22, pp. 1205-1206, 1986 https://doi.org/10.1049/el:19860825
  4. V. J. Tekippe, 'Passive fiber optic components made by the fused biconical taper process', Fiber Integr. O pt., Vol. 9, pp. 97-123, 1990 https://doi.org/10.1080/01468039008202898
  5. J. Bures, S. Lacroix, 'All fiber dense Wavelength Division Multiplexers', Proc. ICOESE'94 https://doi.org/10.1117/12.182037
  6. F.Gonthier, 'Fused coupler technology for DWDM applications', Fiberoptic Product News, 9, 1998
  7. 신동호, 장진현 '100GHz 채널간격의 전광섬유형 DWDM 설계 및 제작, Photonics Conference 2000 pp. 435-436, 2000
  8. 장진현, 강덕근 '광섬유 용융인장 방법에 의한 DWDM용 광다중화기의 제작', 한국정보통신설비학회 논문지 제 3권 2호 pp.51-60, 2004
  9. 장진현,김영권 '고밀도 파장분할용 전광섬유형 인터리버의 수동온도보상', 대한전자공학회 논문지 제41권 SD편12호 pp.35-42, 2004
  10. PAUL E. Green, 'Fiber Optic Networks', Printice Hall, pp .123-127, 1993