DOI QR코드

DOI QR Code

CAE Analysis of Powder Injection Molding Process for Dental Scaler Mold

치과용 스케일러 금형의 분말사출성형 CAE 해석설계

  • 고영배 (한국생산기술연구원 정밀금형팀) ;
  • 박형필 (한국생산기술연구원 정밀금형팀, 아주대학교 기계공학과) ;
  • 정성택 (㈜세타택) ;
  • 이병옥 (아주대학교 기계공학과) ;
  • 황철진 (한국생산기술연구원)
  • Published : 2005.09.01

Abstract

Powder Injection Molding(PIM) has recently been recognized as an advanced manufacturing technology for low-cost mass production of metal or ceramic parts of complicated geometry With this regards, design technology of dental scaler tip PIM mold, which has complex shape and small core pin (diameter=0.6mm), with the help of computer-aided analysis of powder injection molding process was developed. Computer-aided analysis for dental scaler tip mold was implemented by finite element method with non-Newtonian fluid, modified Cross model viscosity, PvT data of powder/binder mixture. Compter-aided analysis results, such as filling pattern, weldline formation, air vent position prediction were compared with experimental result, and eventually have been shown good agreement. The core pin (diameter=0.6mm) deflection analysis of dental scaler tip PIM mold during PIM filling process was also investigated before mold fabrication.

Keywords

References

  1. R. M. German, 1997, Injection Molding of Metals and Ceramics, MPIF, pp. 99-132
  2. R. M. German, 2003, Powder Injection Molding-Design and Applications, Innovative Material Solutions
  3. 황철진, 박형필, 고영배, 허영무, 2005, 분말사출성형에 의한 치과용 스케일러 팁의 제조방법과 금형 및 그 스케일러 팁, 특허출원/10-2005-0035138, 실용신안출원/ 20-2005-0011794, 의장출원/30-2005-0014114
  4. $MOLDFLOW^{TM}$ software, trademark of Moldflow Pty, Ltd., Victoria, Australia
  5. 권태헌, 박성진, 윤경환, 이상봉, 정영득, 2001, 사출성형 CAE 설계지침, 문운당
  6. 1993, 사출금형설계 II, 한국생산기술연구원
  7. 조웅식, 1997, 사출성형 금형설계기술, 기전연구사
  8. Shepard T. A et al., 1996, Minimising Coreshift in Injection Moulded Containers, Plastics Engineering, Vol. 52, pp. 27-29
  9. Shepard T. A et al., 1995, Mechanism For Core Shift In Injection Moulded Containers, Proceedings of Medical Design & Manufacturing, pp. 107-113
  10. Alexander Bakharev et al., 2004, Prediction Of Core Shift Effects Using Mold Filling Simulation, ANTEC
  11. 황철진, 박형필, 고영배, 정성택, 이병옥, 2005, Dental Scaler 분말사출용 금형설계, 한국소성가공학회 2005년도 춘계학술대회, pp. 270-274