Determination of the Orientation of the Scanned Point Data for Direct Rapid Prototyping

직접 쾌속조형을 위한 점 데이터의 조형 자세 결정

  • 변흥석 (국방과학연구소 2 체계개발본부 해양기술부) ;
  • 강의철 (광주과학기술원 기전공학과 대학원) ;
  • 이관행 (광주과학기술원 기전공학과)
  • Published : 2005.10.01

Abstract

Keywords

References

  1. Liu, G.H., Wong, Y.S., Zhang, Y.F. and Loh, H.T., 'Error-based segmentation of cloud data for direct rapid prototyping,' Computer Aided Design, Vol.35, pp.633-645, 2002 https://doi.org/10.1016/S0010-4485(02)00087-8
  2. Wu, Y.F, Wong, Y.S., Loh, H.T. and Zhang, Y.F., 'Modelling cloud data using an adaptive slicing approach,' Computer Aided Design, Vol.36, pp. 231-240,2004 https://doi.org/10.1016/S0010-4485(03)00097-6
  3. Hur, J. and Lee, K., 'The Development of a CAD Environment to Determine the Preferred Build-up Direction for Layered Manufacturing,' International Journal of Advanced Manufacturing Technology, Vol. 14, pp. 247-254, 1998 https://doi.org/10.1007/BF01199879
  4. Pham, D.T., Dimov, D.T. and Gault, R.S., 'Part Orientation in Stereolithography,' International Journal of Advanced Manufacturing Technology, Vol.15, pp. 674-682, 1999 https://doi.org/10.1007/s001700050118
  5. Lin, F., Sun, W., Yan, Y., 'Optimization with minimum process error for layered manufacturing fabrication,' Rapid Prototyping Journal, Vol.7, No.2, pp. 73-8,2001 https://doi.org/10.1108/13552540110386691
  6. Masood, S.H., Rattanawong, W. and Iovenitti, P., 'Part Build Orientations Based on Volumetric Error in Fused Deposition Modeling,' International Journal of Advanced Manufacturing Technology, Vol.19, pp. 162-168,2000 https://doi.org/10.1007/s001700050022
  7. Alexander, P., Allen, S. and Dutta, D., 'Part orientation and build cost determination in layered manufacturing,' Computer Aided Design, Vol.30, pp. 343-356, 1998 https://doi.org/10.1016/S0010-4485(97)00083-3
  8. Xu, F., Loh, H.T. and Wong, Y.S., 'Considerations and selection of optimal orientation for different rapid prototyping systems,' Rapid Prototyping Journal, Vol.5, pp. 54-60,1999 https://doi.org/10.1108/13552549910267344
  9. Thrimurthulu, K., Pandey, P.M. and Reddy, N.V., 'Optimum part deposition orientation in fused deposition modeling,' International Journal of Machine Tools & Manufacture, Vol.4, pp. 585-594, 2004 https://doi.org/10.1016/j.ijmachtools.2003.12.004
  10. Byun, H.S. and Lee, K.H., 'Optimal part orientation of rapid prototyping using a genetic algorithm,' Proc. the 34th International Conference on Computers and Industrial Engineering, San Francisco, CA, November 14-16, 2004
  11. Lee, K.H., Woo, H. and Suk, T., 'Point data reduction using 3D grids,' International Journal of Advanced Manufacturing Technology, Vol. 18, pp. 201-210,2001 https://doi.org/10.1007/s001700170075
  12. Reeves, P.E. and Cobb, R.C., 'Surface deviation modeling of LMT processes - A comparative analysis,' Proceedings of the Fifth European Conference on Rapid Prototyping and Manufacturing, University of Nottingham, UK, pp. 59-77,1995
  13. Chen, C.T., 'Extension of the TOPSIS for group decision-making under fuzzy environment,' Fuzzy Sets and Systems, Vol.114, pp. 1-9,2000 https://doi.org/10.1016/S0165-0114(97)00377-1
  14. Mitsuo, Gen and Runwei, cheng, 'Genetic Algorithms and Mechanical Design,' JOHN WILEY & SONS, INC., 1997