DOI QR코드

DOI QR Code

Synthesis of Sr-Ferrite by a Molten Salt Flux and Its Magnetic Properties

염을 이용한 Sr 페라이트의 분말합성과 그의 자성특성

  • Kim, Jung-Sik (Department of Materials Science and Engineering, The Univerity of Seoul) ;
  • Kim, Si-Dong (Department of Materials Science and Engineering, The Univerity of Seoul)
  • 김정식 (서울시립대학교 신소재공학과) ;
  • 김시동 (서울시립대학교 신소재공학과)
  • Published : 2005.10.01

Abstract

In this study we prepared the Sr-ferrite powders and magnet by a molten salt method using the (NaCl+KCl) salt mixture. Starting materials of $Fe_{2}$$O_{3}$ and Sr$Co_{3}$ were mixed as the molar ratio of 5.70:1, and 0.08 mol$ \% $ $Al_{2}$$O_{3}$, 0.10 mo1$ \% $ Si$O_{2}$ and 0.12 mo1$ \% $ CaO were added as additives. Sr-ferrite powders synthesized at the reaction temperatures of 800$\∼$1200$ ^{\circ}C $ showed the typical M-type hexagonal ferrite phase, and hexagonal plate-like morphology with uniform distribution of 1$\∼$3 $\mu$m particle size. The bulk density of the sintered Sr-ferrite magnet prepared with powders by the molten salt method showed the maximum density of 4.82 g/$cm^{3}$ at the sintering temperature of 1200$^{\circ}C $. The maxima of remanent flux density (Br, 45 emu/g) and coercive force (iHc, 3.75 kOe) occurred at the sintering temperatures of 1150$ ^{\circ}C$ and 1200$^{\circ}C $.

Keywords

References

  1. B. T. Shirk and W. R. Buessem, 'Temperature Dependence ofMs and KI, $BaFe_{12}O_{19}$ and $SrFe_{12}O_{19}$ Single Crystals,' J. Appl. Phys., 40 [3] 1294-98 (1969) https://doi.org/10.1063/1.1657636
  2. A. Morisako, M. Matsumoto, and M. Naoe, 'c-Axis Orientation of Hexagonal Ferrite Films Prepared by RF Diode Sputtering,' J. Magn. Magn. Mater., 54-57 1657-58 (1986) https://doi.org/10.1016/0304-8853(86)90482-8
  3. X. Sui, M. H. Kryder, B. Y. Wong, and D. E. Laughlin, 'Microstructural Origin of the Perpendicular Anisotropy in M-Type Barium Hexaferrite Thin Films Deposited by RF Magnetron Sputtering,' IEEE Trans., 29 3751-53 (1993)
  4. O. Kubo, T. Ido, and H. Yok, 'Properties of Ba Ferrite Particles for Perpendicular Magnetic Recording Media,' IEEE Trans. Magn., 18 1122-27 (1982) https://doi.org/10.1109/TMAG.1982.1062007
  5. F. Harberey and A. Kockel, 'The Formation of Strontium Hexaferrite $SrFe_{12}O_{19}$ from Pure Iron Oxide and Strontium Carbonate,' IEEE Trans. Magn., 12 983-85 (1976) https://doi.org/10.1109/TMAG.1976.1059205
  6. K. Haneda, C. Miyakawa, and H. Kojima, 'Preparation of High Coercivity $BaFe_{12}O_{19}$,' J. Am. Ceram. Soc., 57 354-57 (1974) https://doi.org/10.1111/j.1151-2916.1974.tb10921.x
  7. J. H. Lee, H. H. Lee, and C. W. Won, 'Magnetic Properties of Sr-Ferrite Powders Prepared by Hydrothermal Method,' J. Kor. Inst. Met. & Mater., 33 21-7 (1995)
  8. H. Zhang, L. Li, J. Zhou, Z. Yue, Z. Ma, and Z. Gui, 'Microstructure Characterization and Properties of Chemically Synthesized $Co_2Z$ Hexaferrite,' J. Eur. Ceram. Soc., 21 149-53 (2001) https://doi.org/10.1016/S0955-2219(00)00174-6
  9. Q. Fang, Y. Liu, P. Yin, and X. Li, 'Magnetic Properties and Formation of Sr Ferrite Nanoparticle and Zn, Ti/Ir Substituted Phases,' J. Magn. Magn. Mater., 234 366-70 (2001) https://doi.org/10.1016/S0304-8853(01)00428-0
  10. K. Haneda, C. Miyakawa, and K. Goto, 'Preparation of Small Particles of $SrFe_{12}O_{19}$ with High Coercivity by Hydrolysis of Metalorganic Complex,' IEEE, Vol. Mag., 23 3134- 36 (1987) https://doi.org/10.1109/TMAG.1987.1065394
  11. Y. Hayashi, T. Kanazawa, and T. Yamaguchi, 'Preparation of Acicular NiZn-Ferrite Powders,' J. Mater. Sci., 21 2876-80 (1986) https://doi.org/10.1007/BF00551506
  12. T. Kimura, T. Takahashi, and T. Yamaguchi, 'Preparation and Characterization of Ni- Ferrite Powders Obtained in the Presence of Fused Salts,' J. Mater. Sci., 15 1491-97 (1980) https://doi.org/10.1007/BF00752130
  13. R. H. Arendt, Z. H. Rosolowski, and J. W. Szymaszek, 'Lead Zirconate Titanate Ceramics from Molten Salt Solvent Synthesized Powders,' Mater. Res. Bull., 14 703 (1979) https://doi.org/10.1016/0025-5408(79)90055-2
  14. T. Kimura and T. Yamaguchi, 'Morphology Control of Electronic Ceramic Powders by Molten Salt Synthesis,' Advances in Ceramics, Vol. 21, Ceramic Powder Science, Ed. by G L. Messing, K. S. Mazdiyasni, J. W. McCauley, and R. A. Haber, American Ceramic Society, Westerville, OH, 169-77 (1987)