DOI QR코드

DOI QR Code

Preparation and Piezoelectrical Properties of PMN-PZT Ceramics Prepared by High-Energy Ball Milling

고에너지볼밀법을 이용한 PMN-PZT 세라믹스의 제조와 압전특성

  • Myoung, Seong-Jae (Division of Advaned Materials Engineering, Hanbat National University) ;
  • Koo, Bon-Keup (Division of Advaned Materials Engineering, Hanbat National University)
  • 명성재 (한밭대학교 신소재공학부) ;
  • 구본급 (한밭대학교 신소재공학부)
  • Published : 2005.10.01

Abstract

Pb(Zr,Ti)$O_{3}$Pb($Mn_{1/3}$$Nb_{2/3}$)$O_{3}$ powder was successfully synthesised by high-energy milling method, and the behavior of low­temperature sintering and piezoelectrical properties of Pb(Zr,Ti)$O_{3}$-Pb($Mn_{1/3}$$Nb_{2/3}$)$O_{3}$ ceramics were investigated as a function of mechanical alloying time. In order to confirm whether the Perovskite phase in this composition was formed by mechanical activation technique or not, we performed X-Ray Diffraction pattern analysis (XRD). The microstructure for the sintered samples were characterized using a Scanning Electronic Microscope (SEM). And the piezoelectrical properties ($k_{p}$ and $Q_{m}$) of the sintered samples was measured using HP 4194A impedance analyzer.

Keywords

References

  1. S. Saitou, K. Tsuyoshi, and S. Yasuhiro, 'Development of Multilayer Piezoelectric Ceramic Transformer,' NEC Tech. J., 49 [10] 530-34 (1996)
  2. J. F. Fernandez, C. Moure, M. Villegas, P. Duriqa M. Kosecb, and C. Drazicb, 'Compositional Fluctuations and Properties of Fine-Grained Acceptor-Doped PZT Ceramics,' J Eur. Ceram. Soc., 18 [12] 1695-705 (1998) https://doi.org/10.1016/S0955-2219(98)00090-9
  3. T. Takkaki, N. Ikeda, and N. Ohashi, 'Non-$180^{\circ}$ Domain Contribution in Electric-Field-Induced Strains of PZT Ceramics Measured by a Mach-Zehnder Interferometer,' J. Ceram. Soc. of Jpn., 106 [11] 1062-66 (1998) https://doi.org/10.2109/jcersj.106.1062
  4. G. H. Haertling, 'Ferroelectric Ceramics-History and Technology,' J. Am. Ceramics. Soc., 82 [4] 797-818 (1999) https://doi.org/10.1111/j.1151-2916.1999.tb01840.x
  5. N. Setter and R. Waser, 'Electrocerarnic Materials,' Acta Mater., 48 151-78 (2000) https://doi.org/10.1016/S1359-6454(99)00293-1
  6. Z. Brankovic, O. Miloevic, D. Uskokovic, D. Poleti, and L. Karanovic, 'Nanostructured Constituents of ZnO-Based Varistors Prepared by Mechanical Attrition,' Nanostruct. Mater., 4 [2] 149-57 (1994) https://doi.org/10.1016/0965-9773(94)90074-4
  7. S. Boily, H. Alamdari, G. Cross, A. Joly, A. Van Neste, P. Gruner, and R. Schulz, 'Ball Billed ZnO for Varistor Application,' Mater. Sci. Forum, 235-238, 993-98 (1997)
  8. K. R. M. Rao, A. V. P. Rao, and S. Komameni, 'Reactive PZT Precursor Powder by Coprecipitation,' Mater. Lett., 28 463-67 (1996) https://doi.org/10.1016/0167-577X(96)00106-1
  9. R. N. Das, A. Pathak, and P. Pramanik, 'Low-Temperature Preparation of Nano-Crystalline Lead Zirconate Titanate and Lead Lanthanum Zirconate Titanate Powders Using Tri-Ethanolamine,' J. Am. Ceram. Soc., 81 [12) 3357-60 (1998) https://doi.org/10.1111/j.1151-2916.1998.tb02784.x
  10. V. R. Palkar and M. S. Multani, 'High Density PZT Material,' Mater. Res. Bull., 14 (10) 1353-56 (1979) https://doi.org/10.1016/0025-5408(79)90015-1
  11. H. Hirashima, E. Onishi, and M. Nakagowa, 'Preparation of PZT Powders from Metal Alkoxides,' J. Non-Cryst. Solids, 121 [1-3] 404-06 (1990) https://doi.org/10.1016/0022-3093(90)90166-J
  12. T. R. N. Kutty and R. Balachandan, 'Direct Preparation of 'PZT Zirconate Titanate by the Hydrothermal Method,' Mater. Res. Bull., 19 [11] 1479-88 (1984) https://doi.org/10.1016/0025-5408(84)90262-9
  13. T. Yamamoto, 'Optimum Preparation Methods for Piezoelectric Ceramics and their Evaluation,' Am. Ceram. Soc. Bull., 71 [6) 978-85 (1992) https://doi.org/10.1111/j.1151-2916.1988.tb07568.x
  14. N. Chakrabarti and H. S. Maiti, 'Chemical Synthesis of PZT Powder by Auto-Combustion of Citrate-Nitrate Gel,' Mater. Lett., 30 169-73 (1997) https://doi.org/10.1016/S0167-577X(96)00191-7
  15. M. M. Ristic and S. Milosevic, 'Mechanical Activation of Inorganic Materials,' Monographs of SANU, Belgrade, 1998
  16. L. B. Kong, W. Zhu, and O. K. Tan, 'Preparation and Characterization of Pb(Zr,Ti)$O_3$ Ceramics from High Energy Ball Milling Powders,' Mater. Lett., 42 [4] 232-39 (2000) https://doi.org/10.1016/S0167-577X(99)00190-1
  17. G Arlt and P. Sasko, 'Domain Configuration and Equilibrium Size of Domains in $BaTiO_3$ Ceramics,' J. Appl. Phys., 51 (9) 4956-60 (1980) https://doi.org/10.1063/1.328372