DOI QR코드

DOI QR Code

Study on the Development of an Optimal Hull Form

  • Cho Hee-Jong (Division of Ocean System Engineering, Mokpo National Maritime University) ;
  • Lee Gyoung-Woo (Division of Ocean System Engineering, Mokpo National Maritime University) ;
  • Youn Soon-Dong (Division of Ocean System Engineering, Mokpo National Maritime University) ;
  • Chun Ho-Hwan (Department of Naval Architecture & Ocean Engineering, Pusan National University)
  • 발행 : 2005.09.01

초록

This paper presents the method for developing an optimum hull form with minimum wave resistance using SQP( sequential quadratic programming) as an optimization technique. The wave resistance is evaluated by a Rankine source panel method with non-linear free surface conditions and the ITTC 1957 friction line is used to predict the frictional resistance coefficient. The geometry of the hull surface is represented and modified using NURBS(Non-Uniform Rational B-Spline) surface patches. To verify the validity of the developed program the numerical calculations for Wigley hull and Series 60 Cb=0.6 hull are performed and the results obtained after the numerical calculations are compared with the initial hulls.

키워드

참고문헌

  1. Choi H. J., Chun H. H.(2001), 'Potential Flow Analysis for a Hull with the Transom Stem', J. of KCORE, Vol 15, No 1, pp. 1-6(in Korean)
  2. Choi H. J., Seo K. C., Kim B. E. and Chun H. H.(2003), 'Development of an Optimum Hull Form for a Container Ship with Minimum Wave Resistance', J. of SNAK, Vol 40, No 4, pp.8-15(in Korean) https://doi.org/10.3744/SNAK.2003.40.4.008
  3. Hino, T., Kodama, Y. and Hirata, N.(1998), 'Hydrodynamic Shape Optimization of Ship Hull Forms Using CFD', Proceedings 3rd Osaka Colloquium on Advanced CFD Applications to Ship Flow And Hull Form Design, Osaka, Japan, May 25-27, pp. 533-541
  4. Holtrop, I. J.(1984), 'A Statistical Re-analysis of Resistance and Propulsion Data', International Ship-Building Progress, Vol 31. pp. 272 - 276
  5. Huang, C. H., Chiang, C. C. and Chou, S. K.(1998), 'An Inverse Geometry Design Problem in Optimizing Hull Surfaces', J. of Ship Research, Vol 42, No 20, pp. 79-85
  6. Markov, N. E., Suzuki, K.(2001), 'Hull Form Optimization by Shift and Deformation of Ship Sections', J. of Ship Research, Vol 45, No 3, pp. 197-204
  7. Peri, D, Michele, R. and Emilio, F. C.(2001), 'Design Optimization of Ship Hulls via CFD Techniques', Journal of Ship Research, Vol 45, No 2, pp. 140-149
  8. Raven, H. C.(1996), 'A Solution Method for the Nonlinear Ship Wave Resistance Problem', Doctor's Thesis, Delft Univ. Techn., Delft, Netherlands
  9. Rogers, D. F. and Adams, J. A.(1990), 'Mathematical Elements for Computer Graphics', McGraw-Hill, New York
  10. Tahara, Y., Himeno, Y. and Tsukahara, T.(1998), 'An Application of Computational Fluid Dynamics to Tanker Hull Form Optimization Problem', Proceedings 3rd Osaka Colloquium on Advanced CFD Applications to Ship Flow And Hull Form Design, Osaka, Japan, May 25-27, pp. 515-531
  11. Vanderplaats, G. N.(1984), 'Numerical Optimization Techniques for Engineering Designs', McGrow-Hill, New York

피인용 문헌

  1. Study for Optimal Hull Form Design of a High Speed Ro-Pax Ship on Wave-making Resistance Performance vol.36, pp.10, 2012, https://doi.org/10.5394/KINPR.2012.36.10.787
  2. A Study on Hull-Form Design for Ships Operated at Two Speeds vol.24, pp.4, 2018, https://doi.org/10.7837/kosomes.2018.24.4.467