Effect of Machining Conditions on machining gap in Micro Electrochemical Drilling

미세 전해 구멍 가공에서의 가긍 조건에 따른 가공 간극 변화 특성

  • 김보현 (서울대학교 정밀기계설계공동연구소) ;
  • 박병진 (서울대학교 기계항공공학부) ;
  • 주종남 (서울대학교 기계항공공학부)
  • Published : 2005.12.01

Abstract

Micro hole is ode of basic elements for micro device or micro parts. Micro electrochemical machining (ECM) can be applied to the machining of micro holes less than 50 ${\mu}m$ in diameter, which it is not easy to apply other techniques to. For the machining of passivating metals such as stainless steel, machining conditions should be chosen carefully to prevent a passive layer. The machining conditions also affect the machining resolution, In this paper, machining characteristics of micro ECM were investigated according to machining conditions such as electrolyte concentration and pulse conditions. From the investigation, optimal machining conditions were suggested for micro ECM of stainless steel.

Keywords

References

  1. Schuster, R., Kirchiner, V., Allongue, P. and Etrl, G., 'Electrochemical Micromachining,' Science, Vol. 289, pp. 98-101, 2000 https://doi.org/10.1126/science.289.5476.98
  2. Masuzawa, T., 'State of the Art of Micromachining,' Annals of the CIRP, Vol. 49, No.2, pp. 473-488, 2000 https://doi.org/10.1016/S0007-8506(07)63451-9
  3. Ahn, S. H., Ryu, S. H., Choi, D. K. and Chu, C. N., 'Localized Electro-chemical Micro Drilling Using Ultra Short Pulses,' J. of the KSPE, Vol. 20, No.8, pp. 213-220,2003
  4. Cagnon, L., Kirchner, V., Kock, M., Schuster, R., Ertl, G., Gmelin, W. T. and Kuck, H., 'Electrochemical Micromachining of Stainless Steel by Ultra Short Voltage Pulses,' Zeitschrift fur Physikalische Chemie, Vol. 217, pp. 299-313, 2003 https://doi.org/10.1524/zpch.217.4.299.20383
  5. Bard, A. J. and Faulkner, L. R., 'Electrochemical Methods: Fundamentals and Applications,' 2nd ed., John Wiley & Sons, New York, 2000
  6. Paik, W. K. and Park, S. M., 'Electrochemistry: Science and Technology of Electrode Processes,' Cheongmoongak, Seoul, 2001
  7. Kaesche, H., 'Corrosion of Metals,' Springer, Berlin, 2003
  8. Fujimoto, S., Tsujino, K., Shibata, T., 'Growth and Properties of Cr-rich Thick and Porous Oxide Films on Type 304 Stainless Steel Formed by Square Wave Potential Pulse Polarisation,' Electrochimica Acta, Vol. 47, pp. 543-551,2001 https://doi.org/10.1016/S0013-4686(01)00782-4
  9. Kim, B. H., Ryu, S. H., Choi, D. K., Chu, C. N., 'Micro Electrochemical Milling,' J. of Micromechanics and Microengineering, Vol. 15, pp. 124-129,2005 https://doi.org/10.1088/0960-1317/15/1/019