References
- N. Q. Minh and T. Takahashi, 'Science and Technology of Ceramic Fuel Cells,' pp. 69, Elsevier Science, Amsterdam, The Nertherlands (1995)
- R. T. Dirstine, R. N. Blumenthal, and T. F. Kuech, 'Ionic Conductivity of Calcia, Yttria, and Rare Earth-Doped Cerium Dioxide,' J. Electrochem. Soc., 126 [2] 264-69 (1979) https://doi.org/10.1149/1.2129018
- P. Charpentier, P. Fragnaud, D. M. Schleich, and E. Gehain, 'Preparation of Thin Film SOFCs Working at Reduced Temperature,' Solid State Ionics, 135 [1/4] 373-80 (2000) https://doi.org/10.1016/S0167-2738(00)00472-0
- S. H. Hyun, S. G. Kim, and W. S. Jang, 'Synthesis of Electrolyte Films for Low-Temperature Solid Oxide Fuel Cells by Sol-Gel Coating and Their Characteristics(in Korean),' J. Kor. Ceram. Soc., 36 [4] 391-402 (1999)
- S. H. Lee, 'Fabrications and Applications of Nano Ceramic Particles by Sol-Gel Method,' Prospectives of Ind. Chem., 6 [6] 27-37 (2003)
- M. Z. C. Hu, E. A. Payzant, and C. H. Byers, 'Sol-Gel and Ultrafine Particle Formation via Dielectric Tuning of Inorganic Salt-Alcohol-Water Solutions,' J. Colloid and Int. Sci., 222 [I] 20-36 (2000) https://doi.org/10.1006/jcis.1999.6610
- A. E. Gash, T. M. Tillotson, J. H. Satcher Jr., L. W. Hrubesh, and R. L. Simpson, 'New Sol-Gel Synthetic Route to Transition and Main-Group Metal Oxide Aerogels Using Inorganic Salt Precursors,' J. Non-Crystalline Solids, 285 [113] 22-8 (2001) https://doi.org/10.1016/S0022-3093(01)00427-6
- F. Tietz, H. P. Buchkremer, and D. Stover, 'Components Manufacturing for Solid Oxide Fuel Cells,' Solid State Ioincs, 152-153 378-81 (2002)
- J. Will, A. Mitterdorfer, C. Kleinlogel, D. Perednis, and L. J. Gaukler, 'Fabrication of Thin Electrolytes for Secondgeneration Solid Oxide Fuel Cells,' Solid State Ionics, 131 79-96 (2000) https://doi.org/10.1016/S0167-2738(00)00624-X
- S. Souza, S. J. Visco, and L. C. Jonghe, 'Thin-Film Solid Oxide Fuel Cell with High Performance at Low-Temperature,' Solid State Ionics, 98 [1/2] 57-61 (1997) https://doi.org/10.1016/S0167-2738(96)00525-5
- R. H. Song and K. S. Song, 'Performance Characteristics of Anode-Supported Tubular Solid Oxide Fuel Cell,' Kor. J. Mater. Res., 14 [5] 368-73 (2004) https://doi.org/10.3740/MRSK.2004.14.5.368
- M. Li and G. L. Messing, 'Ceramic Transactions,' pp. 129, in Ceramic Powder Science III, Vol. 12, Ed. by G. L. Messing, S. I. Hirano, and H. Hausner, The American Ceramic Society, Westerville, OH, 1990
- K. Mehta, R. Xu, and A. V. Virkar, 'Two-Layer Fuel Cell Electrolyte Structure by Sol-Gel Processing,' J. Sol-Gel Sci. and Tech., 11 [2] 203 (1998) https://doi.org/10.1023/A:1008605816691
- S. G. Kim, S. W. Nam, S. P. Yoon, S. H. Hyun, J. H. Han, T. H. Lim, and S. A. Hong, 'Sol-Gel Processing of Yttria-stabilized Zirconia Films Derived from the Zirconium N-Butoxide-Acetic Acid-Nitric Acid- Water-Isopropanol System,' J. Mater. Sci., 39 [8] 2683-88 (2004) https://doi.org/10.1023/B:JMSC.0000021442.30015.3c
- W. Bao, Q. Chang, R. Van, and G. Meng, 'The Novel Combination of Electrostatic Powder Coating with Suspension Coaying for Fabrication the Dense YSZ Thin Film on Porous Anode Substrate,' J. Membrane Sci., 252 175-81 (2005) https://doi.org/10.1016/j.memsci.2004.12.009
- T. Okubo and H. Nagamoto, 'Low-Temperature Preparation of Nanostructured Zirconia and YSZ by Sol-Gel Processing,' J. Mater. Sci., 30 749-57 (1995) https://doi.org/10.1007/BF00356338