A Numerical Analysis on Thermal Stratification Phenomenon by In-Leakage in a Branch Piping

  • Park Jong-Il (Department of Building System Engineering, Dong-Eui University)
  • Published : 2005.12.01

Abstract

Thermal stratification in the branch piping of power plants can be generated by turbulent penetration or by valve leakage. In this study, a numerical analysis was performed to estimate the thermal stratification phenomenon by in-leakage in the SIS branch piping of nuclear power plant. Leakage rate, leakage area and leakage location were selected as evaluation factors to investigate the thermal stratification effect. As a result of the thermal stratification effect according to leakage rate, the maximum temperature difference between top and bottom of the horizontal piping was evaluated to be about 185K when the valve leakage rate was about 10 times as much as the allowed leakage rate. For leakage rate more than 10 times the allowed leakage rate, the temperature difference was rapidly decreased due to the increased mixing effect. In the result according to leakage area, the magnitude of temperature difference was shown in order of $3\%,\;1\%\;and\;5\%$ leakage area of the total disk area. In the thermal stratification effect, according to the leakage location, temperature difference when leakage occurred in the lower disk was considerably higher than that of when leakage occurred in the upper disk.

Keywords

References

  1. Ahn, J. S., Kim, E. K., Kim, S. B., Youm, H. K. and Park, M. H., 1996, 'Numerical Analysis for Unsteady Thermal Stratified Turbulent Flow in a Horizontal Circular Cylinder,' Proc. of ICONE-4 Conference
  2. Ahn, J. S., Ko, Y. S., Ko, D. Y., Park, M. H. and Youm, H. K., 1996, 'Numerical Analysis on the Natural Convection in a Long Horizontal Pipe with Thermal Stratification,' Proc. of 14th UIT National Heat Transfer Conference
  3. CEOG Owners Group, 1996, 'Summary of Programs in Response to NRC Bulletin 88-08 (CEOG Task 866),' CE NPSD-1043
  4. EPRI, 1994, 'Thermal Stratification, Cycling and Striping (TASCS),' TR-103581
  5. EPRI, 2000, 'Operating Experience Regarding Thermal Fatigue of Unisolable Piping Connected to PWR Reactor Coolant Systems (MPR-25),' TR-1001006
  6. KEPRI & KOPEC, 1999, 'Pressurized Ther?mal Shock Evaluation for Reactor Pressure Vessel of Kori Unit 1,' Technical Report-TR. 96BJ12.J1999.81
  7. Kim, J. H., Roidt, R. M., and Deardorff, A. F., 1993, 'Thermal Stratification and Reactor Piping Integrity,' Nuclear Engineering and Design, Vol. 139, No. 1, January 1993, pp. 83-96 https://doi.org/10.1016/0029-5493(93)90263-9
  8. NRC, 1979, 'Cracking in Feedwater System Piping,' Bulletin No. 79-13
  9. NRC, 1988, 'Pressurizer Surge Line Thermal Stratification,' Bulletin No. 88-11
  10. NRC, 1998, 'Thermal Stresses in Piping Connected to Reactor Coolant Systems,' Bulletin No. 88-08
  11. Park, M. H., Kim, K. C. and Youm, H. K., 2001, 'Numerical Study on Thermal Mixing Flow in Cold Leg during Loss of Coolant Accident,' Proc. of ASME PVP 2001 Conference
  12. Roarty, D. H., Strauch, P. L. and Kim, J. H., 1994, 'Thermal Stratification, Cycling and Striping Evaluation Methodology, Changing Priorities of Codes and Standards : Failure, Fatigue, and Creep,' Proc. of ASME PVP Conference, Vol. 286, pp. 49-54
  13. Youm, H. K. et aI., 2000, 'Development of Numerical Analysis Model for Thermal Mixing in the Reactor Pressure Vessel,' Proc. of ASME PVP 2000 Conference