Effects of Alumina Powder on the Properties of Mica Sheet Impregnated with Silicone Rubber Resin

알루미나 분말의 첨가에 따른 실리콘고무수지 함침 마이카시트의 특성

  • Published : 2005.12.01

Abstract

This paper describes electrical resistivity, dielectric strength, thermal conductivity, thermal stability and tensile strength of mica sheet impregnated with silicone rubber resin or silicone rubber resin containing alumina powder. The mica sheet impregnated with silicone rubber resin had higher electrical resistivity, dielectric strength and tensile strength than those of virgin mica sheet. Electrical resistivity of mica sheet impregnated with silicone rubber resin containing alumina increased with increasing the amount of alumina. However, dielectric strength and tensile strength of mica sheet impregnated with silicone rubber resin containing alumina decreased with increasing the amount of alumina. The mica sheet impregnated with silicone rubber resin had lower thermal conductivity than that of virgin mica sheet. However, thermal conductivity of mica sheet impregnated with silicone rubber resin conatining alumina increased with increasing the amount of alumina. In the case of thermal stability, thermal degradation of virgin mica sheet and impregnated mica sheet with silicone rubber resin did not occur up to $1100^{\circ}C$ and $400^{\circ}C$, respectively.

Keywords

References

  1. B. M. Badran, A. Galeski and M. Kryszewski, 'High-Density Polyethylene Filled with Modified Chalk', J. Appl. Polym. Sci., vol. 27, no. 10, pp. 3669-3681, 1982 https://doi.org/10.1002/app.1982.070271004
  2. R. Kalinski and A. Galeski, 'Low-Density Polyethylene Filled with Chalk and Liquid Modifier', J. Appl. Polym. Sci., vol. 26, no. 12, pp. 4047-4058, 1981 https://doi.org/10.1002/app.1981.070261207
  3. W. J. Mcgill and J. Fourie, 'The Effects of Fillers, Crosslinking Agents, and Domain Size on the Physical Properties of PE-PCV Blends', J. Appl, Polym. Sci., vol. 19, no. 3, pp. 879-886, 1975 https://doi.org/10.1002/app.1975.070190323
  4. B. R. Norton, 'Engineering Applications of Composites', Academic Press, 1974
  5. Morita M, 'Status of FRP in Electric Industries', Extended Abstract Bulletin, 11th FRP-Symposium, pp. 67-75, 1982
  6. C. H. Park, 'A Study of the Dielectric and Mechanical Property Interactions of Glass Cloth / Epoxy Composite', IEEE, vol. EI-22, pp. 389-395, 1987 https://doi.org/10.1109/TEI.1987.298898
  7. R. W. Staley, 'New Comfortable Mica Paper Tapes 2', IEEE, vol. CH 1717, pp. 65-68, 1981
  8. H. M, Tsu. 'Improvement of Rotation Machinery Insulation Characteristics by Using Paper Containing Aramid Fibrid', IEEE, vol. EI-18, pp. 651-656, 1983
  9. 조정수, 김순태, 곽영순, 박정후, '마이카/실리콘 복합재료의 전기, 기계적 특성과 마이카 아스펙 비의 상관관계의 관한 연구', 한국전기전자재료학회지, 4호, 제 5권, pp. 374-384, 1992
  10. A. Futagawa and S. Yamasaki, 'Dynamic deformation and strength of stator end winding sudden short circuits', IEEE, vol. EI-16, pp. 31-36, 1981
  11. J. Lusis, R. T. Woodhams and M. Xanthos, 'The Effect of Flake Aspect Ratio on the Flexural Properties of Mica Reinforced Plastics', Poly. Eng. & Sci., vol. 13, no. 2, pp. 139-145, 1973 https://doi.org/10.1002/pen.760130210
  12. 吉村 昇,'エポキシ樹脂の 直流破壞電墜に 及ぼす 充て ん劑の 致果' 日本電氣學會誌,A,102卷,pp. 30-50,1987
  13. Edwin P. Plueddemann, 'Silane Coupling Agents', Additives for Plastics, Volume 1, State of the Art, Academic Press, pp. 123-167, 1980