Journal of Korean Society of Steel Construction (한국강구조학회 논문집)

Korean Society of Steel Construction (한국강구조학회)
권호 표지

Local Buckling and Optimum Width-Thickness Ratios of I-Beams in Fire

화재시 I-형강 보의 국부좌굴과 최적 폭-두께비

  • Received : 2005.04.14
  • Accepted : 2005.08.10
  • Published : 2005.08.27
Download PDF
⟨ Previous Next ⟩

Abstract

This study involves the development of a computer program to analyze the local buckling stresses for the flange and the web of I-beams under compression at elevated temperatures, and the optimization algorithm to analyze the optimum width-thickness ratios which does not occur their local buckling prior to yield failure. The high-temperature stress-strain relationships of steel used in this study were based on EC3 (Eurocode3) Part1.2 (2000b). In this study, the local buckling stresses and the optimum width-thichness ratios were analyzed considering the influences of the yield stress, local buckling coefficients and width-thickness ratios of the flange and the web. Design examples show the applicability of the computer program developed in this study.

본 연구는 온도상승에 따른 압축을 받는 I-형강 보의 플랜지와 웨브의 국부좌굴응력해석을 위한 컴퓨터프로그램과 항복파괴전에 I-형강 보의 플랜지와 웨브에 국부좌굴이 일어나지 않을 최적 폭-두께비를 구할 수 있는 최적알고리즘의 개발이다. 본 연구에서 사용한 고온에 있어서 강재의 응력-변형도 관계식은 EC3(Eurocode3) Part1.2(2000b)를 근거하였다. 본 연구에서 국부좌굴응력과 최적 폭-두께비는 항복응력, 플랜지와 웨브의 국부좌굴계수와 폭-두께비 영향을 고려하여 해석하였다. 그리고 본 연구의 컴퓨터 프로그램을 적용한 설계 예를 들었다.

Keywords

Acknowledgement

Supported by : 학술진흥재단

References

  1. Winter, G. (1974), Strength of Thin Steeel Compression Flanges, Transactions, ASCE, 112, PP.527-576
  2. Hancock, G.J. (1977), Local, Distortional and Lateral Buckling of I-Beams, Research Report R312, University of Sydney, School of Civil Engineering, Sydney, Australia
  3. Olawale, A.O. and Plank, R.J. (1988), The collapse analysis of steel columns in fire using a finite strip method, International Journal for Numerical Methods in Engineering, 26
  4. Uy, B. and Bradford, M.A. (1995), Local Buckling of Cold Formed Steel in Composite Structural Elements at Elevated Tempreature, Journal of Constructional Steel Research, 34
  5. Wadee, M.A. (1995), Simulation of the structural Behavior of steel-framed Buildings in Fire, PhD Thesis, University of Sheffield
  6. Feung, M., Y.C.Wang and J.M.Davies, (2003), Structural Behaviour of Cold-formed Thin-Walled Short Steel Channel Columns at Elevated Temperatures. Part1 and Part2 : Design Calculations and Numerical Analysis, Thin-Walled Structures 41
  7. Najjar, S.R. and Burgess, I.W. (1996), A non-linear analysis for three-dimensional steel frames in fire conditions, Engineering Structures, 18(1)
  8. Bailey, C.G., (1999), The behaviour of Asynumetric slim Floor Steel Beams in Fire, Journal of Constructional Steel Research, 50, PP.235-257 https://doi.org/10.1016/S0143-974X(98)00247-8
  9. Liebman, J., L.S. Landon, L. Schrage, L. Schrage and A. Waren (1986), Modeling and Optimization with GINO, The Scientific Press
  10. Bryan, G. H. (1891), On the stability of a Plane Plate under thrusts in its own Plane, with Applicaions to the Buckling of the sides of a ship, Proc. London Math. Soc., Vol.22
  11. Bleich (1952), Buckling Strength of Metal Structures, McGrow-Hill, New York
  12. Timoshenko, S.P., and Gere, J.M. (1961), Theory of Elastic Stability, McGraw-Hill Book CO., Inc., New York, N.Y
  13. European Committee for Standardization (CEN) (2000b), Eurocode3. Draft PrEN 1993-1-2, Eurocode3 : Design of Steel Structures, Part1.2 : General Rules, Structure Fire Design, British Standards Institution, London
  14. 구본율, 강문명, (2004), 온도상승에 따른 H-형강 보의 국부좌 굴에 관한 연구, 한국강구조학회논문집, Vol. 16, No. 1, pp. 103-111
  15. 백태순(2004), 고온에서 압축을 받는 냉간성형 C-형강 기둥 의 국부 및 전체좌굴에 관한 연구, 경북대학교 대학원 박 사논문
  16. 백태순, 강성덕, 강문명(2004), 압축을 받는 냉간성형 C-형강 기둥의 온도상승에 따른 국부좌굴특성, 한국강구조학회논 문집, 제16권, 제4호, pp. 433-442 https://doi.org/10.4334/JKCI.2004.16.3.433
  17. 장명웅, 강문명, 강성덕(2003), 온도상승에 따른 Steel-beam 의 국부좌굴해석, 한국쉘 및 공간구조학회 논문집, Vol. 3, No. 1, pp. 69-75