Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

Process Design of Monobloc Tube for Steering Input Shaft in Cold Drawing

일체형 스티어링 휠 튜브의 인발에 관한 연구

  • 이상곤 (부산대학교 대학원 정밀기계공학과) ;
  • 문형준 (부산대학교 대학원 정밀기계공학과) ;
  • 김병민 (부산대학교 정밀정형 및 금형가공 연구소) ;
  • 이정환 (한국기계연구원 재료기술연구소 공정연구부) ;
  • 이영선 (한국기계연구원 재료기술연구소 공정연구부)
  • Published : 2005.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

MTS(Monobloc Tube Shaft) has been used for the reduction in weight of shaft and increase in supply of power in the auto industry nowadays. Cold drawing process having high productivity and reduction in the cost has been regarded as the effective technology that is able to substitute for swaging process as forming MTS with constant outer diameter or hollow shaft without surface defects. The objective of this study is not only to (md out the optimal process conditions understanding the effect of process parameters on carrying out cold drawing process of SIS(Steering Input Shaft) but also to control the defects resulted from inappropriate process conditions. Therefore, the proper drawing conditions are presented using FE-Analysis and experiment in the paper.

Keywords

References

  1. Dr.-lng. P. Amborn, Dipl.-Ing, H. Frielingsdorf, Prof. S.K. Ghosh, Dr.-lng, K. Greulich, 1995, From Meral Cutting to Metal Forming Modem Side-Shafts for Passenger Cars: Manufacturing Aspects, J. Mater. Proc. Technol., pp. 3-12
  2. W.P. Fisher, A.J. Day, 1997, A study of the factors controlling the tube-sinking process for polymer materials, J. Mater. Proc. Technol., pp. 156-162
  3. Kyung-Keun Um, Dong Nyung Lee, 1997, An upper bound solution of tube drawing, J. Mater. Proc. Technol., pp. 43-48
  4. Z.T. Wang, G.F. Luan, G.R. Bai, 1999, Study of the deformation velocity field and drawing force during the dieless drawing of tube, J. Mater. Proc. Technol., pp. 73-77
  5. Yoichi Imamura, Munekatsu Furugen, Yoshinobu Ando and Hajimu Choba, 1999, Development of a New Tube-Drawing Process for Achieving Ultrasmooth Inner Surface, Journal of the JSTP, vol. 38, no. 472, pp. 477-481
  6. Pongpan Kaewtatip, Masahiko Jin and Masao Murakawa, 1999, Improving Ironing Performance by Using Dies Subjected to Radial Vibration, Journal of the JSTP, vol. 40, no. 457, pp. 123-128
  7. Pongpan Kaewtatip, Masahiko Jin, Tadashi Takanishi and Masao Murakawa, 2000, Relation Between Drawing Tool Shape and Product Precision, Journal of the JSTP, vol. 41, no. 470, pp. 227-232
  8. T. Okamoto, T. Fukuta and H. Hagia, 1997, Material Fracture in Cold Forging-Systematic Classification of Working Methods and Types of Cracking in Cold Forging, ASTM, pp. 216-226
  9. S. Kobayashi, 1970, Deformation Characteristics and Ductile Fracture of 1040Steel in Simple Upsetting of Solid Cylinders and Rings, Trans. ASME, J. of Engineering for Industry, vol. 92, pp. 391-399 https://doi.org/10.1115/1.3427752

Cited by

  1. Development of Cold Forging Process of Hollow-type Wheel Nut Wrench for Commercial Vehicles vol.21, pp.8, 2012, https://doi.org/10.5228/KSTP.2012.21.8.493