Design and Implementation of Bi-polar Power Supplied Die-sinking Electrical Discharge Machine

양극 전원형 형조 방전 가공기 설계 및 구현

  • 정원근 (경상대학교 전자공학과) ;
  • 이건기 (경상대학교 전자공학과)
  • Published : 2005.02.01

Abstract

This paper works on the manufacture and performance evaluation of bi-polar power supplied diesinking electrical discharge machine. The design and implementation of diesinking electrical discharge machine consists of two parts which are a polarity voltage controller design and a servo motor controller design and they are verified and manufactured through simulation. The performance of the implemented machine and conventional one were evaluated by comparing its machining speed and roughness of machined surface. Eventually, the designed machine showed improved performance in the speed and the roughness.

본 논문은 양극 형조 방전 가공기를 제작하고 그 성능을 평가하였다. 설계 구현된 형조 방전 가공기는 극간 전압 제어기 설계와 서보 모터 제어기 설계 두 부분으로 이루어져 있고, 시뮬레이션을 통해 검증하고 제작하였다. 구현된 방전 가공기의 성능을 기존의 방전 가공기와 가공속도와 가공 표면의 거칠기를 비교 평가하였다. 연구의 결과로는 설계된 가공기가 가공속도와 면조도에서 개선된 결과를 얻었다.

Keywords

References

  1. S. Abrate and D. Walton, Machining of composite materials. part II, nontraditional methods, Composite Manufacturing, Vol. 3, No.2. pp. 8594, 1992
  2. 김창호, 최재찬, 방전가공, 기전연구사, pp. 107-119, 1998
  3. S. Abrate and D. Walton, Machining of composite materials. part II : nontraditional methods, Composite Manufacturing, Vol. 3, No.2. pp. 8594, 1992
  4. R. D. Cope and J. C. Brown, An Investigation of Electrical Discharge Machinging of Graphite/Epoxy Composites, Composites Manufacturing, Vol. 1, No.3, pp. 167171, 1990
  5. 済藤長男, 毛利向武, 古谷政典, 放電加功技術, 日刊工業新聞枇, pp. 821, 1997
  6. 増井, 放電加工における異常アーク面の改善, 日本金型技術者曾機械論文集, No, 314, pp. 204205, 1995
  7. 柳済九, 放電加功, 大光書林, 1020, 1993
  8. 小鳥弘之, 放電点俄出による放電功現象の解明, 2022, 1993
  9. 申泰民, 放電加功における極間這俸と加工安 定性に關する研究, 3, 1996