DOI QR코드

DOI QR Code

Modal identification and model updating of a reinforced concrete bridge

  • El-Borgi, S. (Applied Mechanics and Systems Research Laboratory, Tunisia Polytechnic School) ;
  • Choura, S. (Applied Mechanics and Systems Research Laboratory, Tunisia Polytechnic School) ;
  • Ventura, C. (Department of Civil Engineering, University of British Columbia) ;
  • Baccouch, M. (Applied Mechanics and Systems Research Laboratory, Tunisia Polytechnic School) ;
  • Cherif, F. (Applied Mechanics and Systems Research Laboratory, Tunisia Polytechnic School)
  • 투고 : 2003.10.23
  • 심사 : 2004.07.27
  • 발행 : 2005.01.25

초록

This paper summarizes the application of a rational methodology for the structural assessment of older reinforced concrete Tunisian bridges. This methodology is based on ambient vibration measurement of the bridge, identification of the structure's modal signature and finite element model updating. The selected case study is the Boujnah bridge of the Tunis-Msaken Highway. This bridge is made of a continuous four-span simply supported reinforced concrete slab without girders resting on elastomeric bearings at each support. Ambient vibration tests were conducted on the bridge using a data acquisition system with nine force-balance accelerometers placed at selected locations of the bridge. The Enhanced Frequency Domain Decomposition technique was applied to extract the dynamic characteristics of the bridge. The finite element model was updated in order to obtain a reasonable correlation between experimental and numerical modal properties. For the model updating part of the study, the parameters selected for the updating process include the concrete modulus of elasticity, the elastic bearing stiffness and the foundation spring stiffnesses. The primary objective of the paper is to demonstrate the use of the Enhanced Frequency Domain Decomposition technique combined with model updating to provide data that could be used to assess the structural condition of the selected bridge. The application of the proposed methodology led to a relatively faithful linear elastic model of the bridge in its present condition.

키워드

참고문헌

  1. ARTeMIS Program Overview, http://www.svibs.com, accessed August 12th, 2004.
  2. Allemang, R. J and Brown, D. L. (1982), "A correlation coefficient for modal vector analysis", Proceedings of the 1st Int. Modal Analysis Conf. (IMAC), Orlando, Florida.
  3. Brincker, R. and Andersen, P. (2000), "Ambient response analysis of the heritage court building structure", Proceedings of the 18th Int. Modal Analysis Conf. (IMAC), San Antonio, Texas, 1081-1087.
  4. Brincker, R., Andersen, P. and Frandsen, J. B. (2000), "Ambient response analysis of the great belt bridge", Proceedings of the 18th Int. Modal Analysis Conf. (IMAC), San Antonio, Texas, 26-32.
  5. Brincker, R., Andersen, P. and Zhang, L. (2000), "Modal identification from ambient responses using frequency domain decomposition", Proceedings of the 18th Int. Modal Analysis Conf. (IMAC), San Antonio, Texas, 625-630.
  6. CCBA (1968), Cahier des prescriptions communes, Regles techniques de conception et de calcul des ouvrages en beton arme, Fascicule 61, Titre VI, Bulletin officiel du Ministere de lequipement, du logement et du Ministere du Transport (in French).
  7. Catbas, N., Ciloglu, K., Celebioglu, A., Popvics, J. and Aktan, E. (2001), Proceedings of the 6th Annual Symp. on NDE for Health Monitoring and Diagnostics, Newport Beach, California, USA, Fleet Health Monitoring of Large populations: Aged Concrete T-Beam Bridges in Pennsylvania.
  8. Computers and Structures, Inc., 2000, SAP2000: Three Dimensional Static and Dynamic Finite Element Analysis and Design of Structures.
  9. DasyLab Program Overview, http://www.dasylab.net/dasylab_english/, August 12th, (2004).
  10. FEMTools Program Overview, http://www.femtools.com, August 12th, 2004.
  11. Kinemetrics, Inc., (1997), Operating Instructions for Vibration Survey System, Model VSS-3000.
  12. Kinemetrics, Inc., (2000), Users Guide for the EpiSensor Force Balance Accelerometers, Model FBA ES-U.
  13. Phares, B. (2001), "Highlights of study of reliability of visual inspection", Presentation at the Annual Meeting of TRB Subcommittee A2C05(1) Non-destructive Evaluation of Structures, FHWA Report No. FHWA-RD-01-020 and FHWA-RD-01-021.
  14. Van Overschee, P. and Moor, B. De. (1996), Subspace Identification for Linear Systems: Theory, Implementations and Applications. Kluwer Academic Publications.

피인용 문헌

  1. Ambient vibration testing of Berta Highway Bridge with post-tension tendons vol.16, pp.1, 2014, https://doi.org/10.12989/scs.2014.16.1.021
  2. Seismic vulnerability assessment of a historical building in Tunisia vol.4, pp.2, 2008, https://doi.org/10.12989/sss.2008.4.2.209
  3. Experimental and numerical studies toward the implementation of shape memory alloy ties in masonry structures vol.4, pp.2, 2008, https://doi.org/10.12989/sss.2008.4.2.153
  4. Structural safety assessment of bowstring type RC arch bridges using ambient vibration testing and finite element model calibration vol.58, 2014, https://doi.org/10.1016/j.measurement.2014.08.002
  5. Determination of optimal accelerometer locations using modal sensitivity for identifying a structure vol.4, pp.5, 2008, https://doi.org/10.12989/sss.2008.4.5.629
  6. Damage detection of coupled bridge deck-girder system vol.42, pp.11, 2006, https://doi.org/10.1016/j.finel.2006.01.012
  7. Tunable Energy Harvesting from Ambient Vibrations in Civil Structures vol.138, pp.4, 2012, https://doi.org/10.1061/(ASCE)EY.1943-7897.0000077
  8. Feasibility of structural monitoring with vibration powered sensors vol.15, pp.4, 2006, https://doi.org/10.1088/0964-1726/15/4/011
  9. Experimental validation of an ambient vibration-based multiple damage identification method using statistical modal filtering vol.325, pp.1-2, 2009, https://doi.org/10.1016/j.jsv.2009.03.001
  10. Dual use of PZT patches as sensors in global dynamic and local electromechanical impedance techniques for structural health monitoring vol.22, pp.16, 2011, https://doi.org/10.1177/1045389X11414219
  11. Stiffness identification and damage localization via differential evolution algorithms vol.15, pp.3, 2008, https://doi.org/10.1002/stc.236
  12. Structural damage detection in continuum structures using successive zooming genetic algorithm vol.30, pp.2, 2008, https://doi.org/10.12989/sem.2008.30.2.135
  13. Computational finite element model updating tool for modal testing of structures vol.51, pp.2, 2014, https://doi.org/10.12989/sem.2014.51.2.229
  14. Structural model updating of steel box girder bridge using modal flexibility based deflections vol.7, pp.4, 2012, https://doi.org/10.3846/bjrbe.2012.34
  15. Modal Identification, Model Updating and Nonlinear Analysis of a Reinforced Concrete Bridge vol.14, pp.4, 2008, https://doi.org/10.1177/1077546307079788
  16. Finite element model updating of Kömürhan highway bridge based on experimental measurements vol.6, pp.4, 2005, https://doi.org/10.12989/sss.2010.6.4.373
  17. Experimental Dynamic Characterization and Finite-Element Updating of a Footbridge Structure vol.29, pp.4, 2015, https://doi.org/10.1061/(asce)cf.1943-5509.0000615
  18. An efficient approach for model updating of a large-scale cable-stayed bridge using ambient vibration measurements combined with a hybrid metaheuristic search algorithm vol.25, pp.4, 2005, https://doi.org/10.12989/sss.2020.25.4.487