대한치과보철학회지 (The Journal of Korean Academy of Prosthodontics)

  • 제43권1호
  • /
  • Pages.41-51
  • /
  • 2005
  • /
  • 0301-2875(pISSN)
  • /
  • 2005-3789(eISSN)
대한치과보철학회 (The Korean Academy of Prosthodonitics)
권호 표지

한국 성인 유치악자의 교합평면 및 수직고경에 관한 연구

A STUDY ON THE OCCLUSAL PLANE AND THE VERTICAL DIMENSION IN KOREAN ADULTS WITH NATURAL DENTITION

  • 박정형 (부산대학교 치과대학 보철학교실) ;
  • 정창모 (부산대학교 치과대학 보철학교실) ;
  • 전영찬 (부산대학교 치과대학 보철학교실) ;
  • 임장섭 (부산대학교 치과대학 보철학교실)
  • Park Jeong-Hyeong (Department of Prosthodontics, College of Dentistry, Pusan National University) ;
  • Jeong Chang-Mo (Department of Prosthodontics, College of Dentistry, Pusan National University) ;
  • Jeon Young-Chan (Department of Prosthodontics, College of Dentistry, Pusan National University) ;
  • Lim Jang-Seop (Department of Prosthodontics, College of Dentistry, Pusan National University)
  • 발행 : 2005.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Statement of problem. Anatomic landmarks have been used in the orientation of occlusal plane and the determination of vertical dimension for edentulous patients. Such as labial vestibules of anterior region and hamular notches, retromolar pads of posterior region are very useful anatomic landmarks for fabrication of occlusion rim because they are to be identified on master casts. Therefore, if average distances between landmarks of maxillae and mandible in dentate subjects are measured and applied, not only occlusal plane but also vertical dimension can be established initially. Purpose. The purpose of this study is to measure vertical distances between anatomic landmarks and to present a guide to the orientation of occlusal plane and the determination of vertical dimension of edentulous patients. Material and method. Upper and lower border-molded casts were made in 93 Korean dentulous subjects, mean age 25 years. Incisal edges of central incisors, bottoms of labial vestibules, hamular notches and the half level of retromolar pads were marked on casts. Measurements of vertical distances from incisal edge of central incisor to the bottom of labial vestibule, between upper and lower bottoms of labial vestibules, from hamular notch to retromolar pad and from hamular notch to the occlusal plane established by the incisal edge of maxillary central incisor and mesiopalatal cusps of both maxillary first molars were made on each cast. Results and conclusion. 1. The mean distance from the incisal edge of central incisor to the bottom of labial vestibule was 20.8mm(SD 1.7) on upper casts and 17.3mm(SD 1.4) on lower casts. 2. The mean distance between both bottoms of labial vestibules of upper and lower casts was 35.0mm(SD 2.7). 3 The mean distance from hamular notch to the half level of retromolar pad was 5.0mm(SD 1.3). 4. The mean distance from hamular notch to occlusal plane was 7.9mm(SD 1.5). 5. Distances from incisal edge of central incisor to labial vestibule on lower casts(P<0.01) and from hamular notch to retromolar pad(P<0.0001) were greater in male than in female.

키워드

참고문헌

  1. The glossary of prosthodontic terms. 7th ed. J Prosthet Dent 1999;81:39-110 https://doi.org/10.1016/S0022-3913(99)70234-9
  2. Zarb GA, Bolender CL, Hickey JC. Carlsson GE. Boucher's prosthodontic treatment for edentulous patients. 10th ed. St. Louis: CV Mosby; 1990. p.272-309
  3. Lee JI, Shin SW, Suh KW. A study on establishing the occlusal plane. J Korean Acad Prosthodont 1992;30:575-80
  4. Monteith BD. A cephalometric method to determine the angulation of the occlusal plane in edentulous patients. J Prosthet Dent 1985;54:81-7 https://doi.org/10.1016/S0022-3913(85)80076-7
  5. Park SH, Heo SJ, Cho IH. A study on the relationship of between facial and oral anatomic landmark and vertical dimension in Korean adults. J Korean Acad Prosthodont 1992;30:43-53
  6. Koller MM, Merlini L, Spandre G, Palla S. A comparative study of two methods for the orientation of the occlusal plane and the determination of the vertical dimension of occlusion in edentulous patients. J Oral Rehabil 1992;19:413-25 https://doi.org/10.1111/j.1365-2842.1992.tb01583.x
  7. Fayz F, Eslami A, Determination of occlusal vertical dimension : a literature review. J Prosthet Dent 1988;59:321-3 https://doi.org/10.1016/0022-3913(88)90182-5
  8. Celebic A, Valentic-Peruzovic M, Kraljevic K, Brkic H. A study of the occlusal plane orientation by intra-oral method (retromolar pad). J Oral Rehabil 1995;22:233-6 https://doi.org/10.1111/j.1365-2842.1995.tb01569.x
  9. Park JH, Oh SC, Dong JK. A comparative study on the several facial measurement method for vertical dimension. J Korean Acad Prosthodont 1995;33:75-84
  10. Fayz F, Eslami A, Graser GN. Use of anterior teeth measurements in determining occlusal vertical dimension. J Prosthet Dent 1987;58:317-22 https://doi.org/10.1016/0022-3913(87)90048-5
  11. Willis FM. Features involved in full denture prosthesis. Dent Cosmos 1935;77:851-4
  12. Smith DE : The reliability of pre-extraction records for complete dentures. J Prosthet Dent 1971;25:592-608 https://doi.org/10.1016/0022-3913(71)90121-1
  13. McGrane HF. Five basic principles of the McGrane full denture procedure. J Florida Dent Soc 1949;20:5-8
  14. Thompson JR. The rest position of the mandible and its significance to dental science. J Am Dent Assoc 1946;33:151-80
  15. Atwood DA. A cephalometric study of the clinical rest position of the mandible. J Prosthet Dent 1956;6:504-19 https://doi.org/10.1016/0022-3913(56)90094-4
  16. Shanahan TEJ. Physiologic vertical dimension and centric relation. J Prosthet Dent 1956;6:741-7 https://doi.org/10.1016/0022-3913(56)90070-1
  17. Boos RH, Intermaxillary relation established by biting power. J Am Dent Assoc 1940;27:1192-9
  18. Silverman MM. Determination of vertical dimension by phonetics. J Prosthet Dent 1956;6:465-71 https://doi.org/10.1016/0022-3913(56)90091-9
  19. Pound E. Applying harmony in selecting and arranging teeth. Dent Clin North Am 1962;6:241-58
  20. Hong SK, Lim JH, Cho IH. A study on the establishment of vertical dimension in edentulous patient using a Dento-Profile Scale. J Korean Acad Prosthodont 1987;25:155-60
  21. Ismail YH, Bowman JF. Position of the occlusal plane in natural and artificial teeth. J Prosthet Dent 1968;20:407-11 https://doi.org/10.1016/S0022-3913(68)80017-4
  22. Lundquist DO, Luther WW. Occlusal plane determination. J Prosthet Dent 1970;23:489-98 https://doi.org/10.1016/0022-3913(70)90198-8
  23. Yasaki M. The height of the occlusion rim and the interocclusal distance. J Prosthet Dent 1961;11:26-31 https://doi.org/10.1016/0022-3913(61)90106-8
  24. Chung MK. A comparative study of alatragus line and occlusal plane in edentulous patient. J Korean Acad Prosthodont 1989;27:25-9
  25. Karkazis HC, Polyzois GL. A study of the occlusal plane orientation in complete denture construction. J Oral Rehabil 1987;14:399-404 https://doi.org/10.1111/j.1365-2842.1987.tb00735.x
  26. Rich H. Evaluation and registration of the H.I.P. plane of occlusion. Aust Dent J 1982;27:162-8 https://doi.org/10.1111/j.1834-7819.1982.tb04081.x
  27. Foley PF, Latta GH Jr. A study of the position of the parotid papilla relative to the occlusal plane. J Prosthet Dent 1985;53:124-6 https://doi.org/10.1016/0022-3913(85)90080-0
  28. Ellinger CW. Radiographic study of oral structures and their relation to anterior tooth position. J Prosthet Dent 1968;19:36-45 https://doi.org/10.1016/0022-3913(68)90007-3
  29. Sloane RB, Cook BA. A guide to the orientation of the plane of occlusion. J Prosthet Dent 1953;3:53-65 https://doi.org/10.1016/0022-3913(53)90037-7
  30. Oh YR, Lee SB, Park NS, Choi DG. A study of intraoral anatomic landmarks of Korean adult upper-jaw. J Korean Acad Prosthodont 1995;33:753-66
  31. L Estrange PR, Vig PS. A comparative study of the occlusal plane in dentulous and edentulous subjects. J Prosthet Dent 1975;33:495-503 https://doi.org/10.1016/S0022-3913(75)80161-2
  32. Graser GN, Plekavich EJ, Espeland MA. Anthropometric measurements for anterior tooth position and vertical dimension of occlusion. J Dent Res 1986;65:249
  33. Ow RK, Djeng SK, Ho CK. Orientation of the plane of occlusion. J Prosthet Dent 1990;64:31-6 https://doi.org/10.1016/0022-3913(90)90149-7
  34. Lee SJ, Choi DG, Woo YH, Choi BB. A study of the occlusal plane orientation in Korean adults. Kyung Hee Univ Dent J 1997;19:753-69
  35. 林 都志夫. 全部床義齒補綴學. 第3版. 東京 : 醫齒藥山版株式會社; 1993. p.280-96
  36. Karkazis HC, Polyzois GL. Cephalom-etrically predicted occlusal plane : implications in removable prosthodontics. J Prosthet Dent 1991;65:258-64 https://doi.org/10.1016/0022-3913(91)90172-S
  37. Tallgren A, Solow B. Age differences in adult dentoalveolar heights. Eur J Orthod 1991;13:149-56 https://doi.org/10.1093/ejo/13.2.149
  38. Nissan J, Barnea E, Zeltzer C, Cardash HS. Relationship between occlusal plane determinants and craniofacial structures. J Oral Rehabil 2003;30:587-91 https://doi.org/10.1046/j.1365-2842.2003.01044.x
  39. Landa JC. A scientific approach to the study of the temporomandibular joint and its relation to occlusal disharmonies. J Prosthet Dent 1957;7:170-81 https://doi.org/10.1016/0022-3913(57)90073-2
  40. McGee GF. Use of facial measurements in determining vertical dimension. J Am Dent Assoc 1947;35:342-50