Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지

Performance Simulation for the Variation of Fuel Injection Nozzle Configurations in Medium Speed Diesel Engine

중형 디젤 엔진의 연료분사노즐 형상에 따른 성능 해석 연구

  • 김기두 (현대중공업 기술개발본부 산업기술연구소 엔진연구실) ;
  • 윤욱현 (현대중공업 기술개발본부 산업기술연구소 엔진연구실) ;
  • 김병석 (현대중공업 기술개발본부 산업기술연구소 엔진연구실) ;
  • 하지수 (현대중공업 기술개발본부 산업기술연구소 엔진연구실) ;
  • 안광헌 (현대중공업 엔진기계사업본부 엔진기술개발부) ;
  • 김주태 (현대중공업 엔진기계사업본부)
  • Published : 2006.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

The effects of fuel injection nozzle hole on the NOx emission and fuel oil consumption of medium speed diesel engine HYUNDAI HiMSEN 6H21/32 engine are investigated by engine performance simulation. The results of performance simulation are verified by experimental results of NOx omission fuel oil consumption, cylinder pressure, and heat release rate according to the variation of the number of fuel injection nozzle hole and engine load. The performance simulations are also carried out to optimize the fuel injection nozzle of 6H21/32 engine in respect to the NOx emission and fuel oil consumption. The engine performance measurements are performed to verify the results of performance simulation and to investigate the effects of fuel injection nozzle on engine performance. The results of measurement indicate that significant NOx reduction can be achieved with minimum deterioration in fuel oil consumption by optimizing the geometry of fuel injection nozzle on 6H21/32 engine.

Keywords

References

  1. N. Watson and M.S. Janota, 'Turbocharging the Internal Combustion Engine', Macmillan Press LTD, 1982
  2. Heywood, J. B., 'Internal Combustion Engines Fundamentals', McGrow-Hill, New York, 1988
  3. H. M. Koegeler, G. Regner, T. Sams and K. Gschweitl, 'Using Simulation and Optimization Tools to Decide Engine Design Concepts', SAE 2000-01-1267, 2000
  4. Hiroaki Kimura, Satoru Goto, Takahisa Mimura and Katsuhisa Ikawa, 'NOx Reduction Study on Four Stroke, Slow Speed Engine for Marine Propulsion Use', ASME 2000
  5. Hiroyasu, H. and Kadota, T., 'Development and Use of a Spray Combustion Modeling to Predict Diesel Engine Efficiency and Pollutant Emission part 1: Combustion Modeling', Bulletin of JSME, vol. 26, no. 214, 1983
  6. Chmela, F. and Orthaber, G., 'Rate of Heat Release Prediction for Direct Injection Diesel Engines Based on Purely Mixing Controlled Combustion', SAE Detroit, 1999
  7. Shusuke Okada and Shunji Hamaoka, 'The Development of Very Low Fuel Consumption Medium Speed Diesel Engine', CIMAC 2001