DOI QR코드

DOI QR Code

Stabilizing Capability of Oyster Shell Binder for Soft Ground Treatment

표층/심층혼합처리용 굴패각 고화재의 고화성능 평가

  • Published : 2006.11.30

Abstract

An experimental study was carried out to investigate the stabilizing capability of oyster shell binder, which was developed using waste oyster shell inducing environmental pollutions by piling up out at the open or the temporary reclamation. The purpose of this paper is to compare stabilinzing capability of oyster shell binder and cement binder with treated soils. For this, a series of compressive laboratory tests were peformed to evaluate strength characteristics of treated soils by both oyster shell binder and cement binder with varing water content of dredged soils, different mixing rates of binder and curing days. Based on test results, eco-friendly binder manufactured by oyster shells showed more stabilizing capacity than cement binder and is estimated as good resource materials for soft soil improvements.

무단 매립이나 일시 야적으로 환경오염을 유발하는 굴패각을 활용한 친환경 굴패각고화재의 고화성능을 평가하는 일련의 실험연구를 수행하였다. 연구목적은 연약지반개량에 적용하기 위하여 고화재의 고화능력을 평가하고 지반개량 효과를 규명하는 것이다. 이를 위하여 굴패각 고화재 및 시멘트 고화재를 가지고 준설토사에 적용하여 양생기간 및 물/고화재 비를 다르게 변화하면서 일축압축실험을 수행하여 상호 비교하였다. 실내모형 실험을 수행한 결과,굴패 각 고화재는 표층이나 천층 및 심층혼합처리공법으로 연약지반을 개량하는 경우에 시멘트 고화재 보다 고화성능이 우수한 것으로 나타났다.

Keywords

References

  1. 굴수하식양식수산협동조합 (2002), 굴양식현황 및 패각처리 대책 보고서
  2. 윤길림, 김병탁, 김준형, 채영수, 서승남, 심재설 (2001), '굴패각 혼합한 모르타르 혼합토의 강도특성 연구', 한국지반공학회 논문집, 제17권 5호, pp.51-60
  3. 윤길림, 채광석, 백승철, 윤여원 (2006), '친환경 굴껍질 고화재 개발', 한국지반공학회 논문집, Vol.21, No.3, pp.79-86
  4. 한국해양연구원 (2004), '굴패각을 이용한 지반개량형 고화재 제조방법', 한국특허 등록번호; 0464666
  5. 한국해양연구원 (2000-2004), 굴패각 혼입 특수콘크리트개발, 해양수산부 연구보고서
  6. Miyamoto, M., Taniguchi, K., Yamada, M. and Hana, S. (2001), 'Reuse of Oyster shell Resources of civil engineering materials', Japan Ishigawa Industry Reports (IRII), Vol.51, pp.1-5
  7. Miyaji Y. and Okumura T. (2000), 'Geo-material properties of wasted oyster shell-sand mixture and its application as material for sand compaction pile', Proc. of Coastal Geotechincal Engineering in Practice, Nakase & Tsuchida (Eds.), Rotterdam, pp.675-680