The Transactions of the Korean Institute of Electrical Engineers B (대한전기학회논문지:전기기기및에너지변환시스템부문B)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

Single Phase Switched Reluctance Motor Optimum Design Using Response Surface Methodology and Finite Element Method

반응표면법과 유한요소법을 이용한 단상 스위치드 릴럭턴스 전동기의 최적 설계

  • Published : 2006.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents Single Phase Switched Reluctance Motor (SPSRM) optimum design for vacuum cleaners using Response Surface Methodology (RSM) to determine geometric parameters, and the 2-D Finite Element Method (FEM) has been coupled with the circuit equations of the driving converter. Additionally, an optimum process for SPSRM has been proposed and peformed with geometric and electric parameters thereby influencing the inductance variation and effective torque generation as design variables. SPSRM performances have also been analyzed to determine an optimal design model for maximized efficiency at high power factor. In order to confirm the propriety of the Finite Element Method and motor performance calculation, simulation waveform and experiment waveform for motor voltage and current were compared.

Keywords

References

  1. T. J. E. Miller, Electric Control of Switched Reluctance Machines, Jordan Hill, Oxford: Reed Educational and Professional Publishing Ltd: A division of Reed Educational, 2001
  2. 릴럭턴스 모터 조사전문위원회, '스위치드 릴럭턴스 모터의 기술 동향', 大韓電氣學會, 1994年
  3. Tae Heoung Kim, Jae-Hak Choi, Kwang Cheol Ko, and Ju Lee, 'Finite-element analysis of brushless DC motor considering freewheeling diodes and DC link voltage ripple', IEEE Transactions on Magnetics, vol. 39 no. 5, pp. 3274-3276, Sep. 2003 https://doi.org/10.1109/TMAG.2003.816746
  4. Sheppard J. Salon, Finite Element Analysis of Electrical machines, Kluwer Academic Publishers, 1995
  5. 김윤현, '토크 리플 저감을 위한 SRM 최적설계 및 직접 토크 제어', 박사학위 논문, 한양대학교 대학원, 2001
  6. S. J. Salon, Finite Element Analysis of Electric Machines, Kluwer Academic Publishers, 1995
  7. 김인동, '역률에 관하여', 電力電子學會誌 第 7卷 제 5號, 2002
  8. Jasbir S. Arora, Introduction To Optimum Design, Mcgraw-Hill International Editions, 1994
  9. 이레테크 미니탭사업부 & 새한미디어 주식회사, MINITAB 실무완성 매뉴얼, 이레테크, 2001