Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지
DOI QR코드

DOI QR Code

Bone Body Production and Red Color Body Development Using the Bone Body

본소지 제조와 그것을 이용한 붉은 색소지 개발

  • Choi, Soo-Nyong (Department of Ceramic Engineering, Myongji University) ;
  • Lee, Yong-Seok (Material Research Institute for Sustainable Development, AIST Chubu, Japan) ;
  • Lee, Byung-Ha (Department of Ceramic Engineering, Myongji University)
  • 최수녕 (명지대학교 신소재공학과) ;
  • 이용석 (일본 산업기술총합연구소 중부센터 Sustainable 연구부문 세라믹응용부재연구그룹) ;
  • 이병하 (명지대학교 신소재공학과)
  • Published : 2006.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

For the purpose of development of red color stain body, bone body which can be fired at 1180$^{\circ}C$ and has a higher degree of whiteness and transmission was developed and a property experiment depending on the content of $Fe_2O_3$ was performed. For manufacturing this body, 9% addition of bone ash to commercialized white body resulted in the best whiteness and proper physical characteristics. In an experiment of oxidized iron addition using this body as a basis, red color stain body fired up to 1150$^{\circ}C$ following the addition of 6% oxidized iron showed physical characteristics such as 5.4R color closer to theory color, 0.08% water absorption rate, 9.1% shrinkage, and 1861 kgf/$cm^2$ bending strength, which implies that this body is suitable for red color stain body.

Keywords

References

  1. H. S. Lee, 'A Study on the Characteristics of Colored Clay (in Korean),' pp. 46-9, A Master's Thesis, Dankook University, Seoul, 1997
  2. M. Hassanein, W. Abdel-Fattah, K. Nakhla, and F. A. Nour, 'Some Color Aspects of Parian Bodies,' Ceram. International, 10 [3] 93-8 (1984) https://doi.org/10.1016/0272-8842(84)90009-9
  3. T. Tlaczala and A. Bartecki, 'Electronic Spectroscopy and Trichromaticity Colorimetry of Some Inoranic Pigments and their Mixtures,' Dtes and Pigments, 28 [4] 47-56 (1995) https://doi.org/10.1016/0143-7208(94)00074-C
  4. J. G. Lee, J. O. Kim, Y. H. Bae, J. S. Lee, B. H. Lee, and D. W. Shin, 'Ceramics Raw Materials,' pp. 279-82, Ban-Do company, 1996
  5. H. J. Lim, 'Synthesis of Spinel Stain on Porcelain and Construction of Computer Data Base for Colour Development of Glaze(in Korean),' pp. 4-6, Vol. 14, Ph. D. Thesis, Hanyang University, Seoul, 1999
  6. E. S. Lee and S. H. Lee, 'A Study on Effect of Physical Properties of Additives to Bone Chain Body(in Korean),' J. Kor. Ceram. Soc., 26 [2] 289-95 (1989)