DOI QR코드

DOI QR Code

Shape Optimization for a Jaw Using Design Of Experiments

실험계획법을 이용한 조(Jaw)의 형상최적설계

  • 방일권 (동아대학교 기계공학과 대학원) ;
  • 강동헌 (동아대학교 기계공학과 대학원) ;
  • 한동섭 (동아대학교 기계공학과 대학원) ;
  • 한근조 (동아대학교 기계공학과) ;
  • 이권희 (동아대학교 기계공학과)
  • Published : 2006.10.31

Abstract

The rail clamp is the device to prevent that a crane slips along rails due to the wind blast as well as to locate the crane in the set position for loading and unloading containers. The wedge typed rail clamp should be designed to consider the structural stability and the durability because it compresses both rail side with large clamping force by the wedge working as the wind speed increases. In this research, the design of experiments(DOE) and the variation technology(VT) built in ANSYS WORKBENCH are utilized to determine the optimum shape of a jaw. The optimum results obtained by two methods are compared and examined.

컨테이너 터미널에서 컨테이너의 양 하역 작업 시 컨테이너 크레인을 정위치에 고정시키고, 돌풍으로 인해 컨테이너 크레인이 레일방향으로 미끄러지는 것을 방지하는 장치가 레일클램프이다. 쐐기형 레일클램프는 초기에는 작은 압착력으로 레일을 압착하다가 풍속이 증가하면 쐐기작용에 의해 압착력이 증가하는 방식을 취함으로서 구조적으로 안정성과 내구성이 높은 장점을 가지고 있다. 본연구에서는 레일클램프의 주요부인 조에 대해 형상최적설계를 수행하였다. 본 논문에서는 솔리드 요소로 유한요소 모델링된 조(jaw)의 경량화 설계를 위하여 강도를 고려하였다. 설계변수로는 조의 측면부의 두께, 조의 중간부의 롤러지지부의 두께, 조의 하단부의 롤러지지부의 두께, 조의 곡면부의 위치로 설정하였다. 본 연구에서는 상용프래그램인 ANSYS WORKBENCH의 최적화 기능을 이용하였다.

Keywords

References

  1. Kim, J. R.(2003), "Wind Resitance Design Learning from Typhoon Maemi," J. of WEIK, Vol. 7, No. 2, pp.150-156
  2. Ministry of Maritime Affairs & Fisheries (2004), "Management Regulation for Facilities and Equipment in Port"
  3. Lee, S. W., Shim, J. J., Han, D. S., Park, J. S., Han, G. J., Lee, K. S., Kim, T. H. (2005) , "The Effect of Wind Load on the Stability of a Container Crane," J. of KSPE, Vol. 22, No. 2, pp. 148-155.
  4. Han, D. S., Han, G. J., Lee, K. H., and Lee, J. M.(2005), "Design of the Various Wedge Type Rail Clamp for Quay Crane according to the Design Wind Speed Criteria Changes," Asia Navigation Conference 2005, pp. 291-301.
  5. Han, G. J., Ahn, C. W., Kim, T. H., Shim, J. J., Han, D. S., Lee, H., Jean, Y. H.(2003), "Study for Weight of Wedge Type Rail Clamp according to Initial Clamping Force," Proceedings of the KSPE 2003 Spring Annual Meeting, pp. 1517-1520.
  6. Han, G. J., Lee, H., Shim, J. J., Han, D. S., Ahn, C. W., and Jean, Y. H.(2004), "Study on the Wedge Angle of Wedge Type Rail Clamp for Container Crane," J. of KSPE, Vol. 21, No. 9, pp. 119-126.
  7. Han, D. S., Shim, J. J., Han, G. J., Lee, K. H.(2005), "A Experimental Analysis on the Relation between the Angle of a Locker and the Clamping Force of Wedge Type Rail Clamp," Proceedings of the KINPR 2005 Autumn Annual Meeting, pp. 247-252.
  8. Lee, H., Han, G. J., Ahn, C. W., Jean, Y. H., Shim, J. J., Han, D. S.(2003), "A Study on Wedge Angles of Wedge Type Rail Clamp for Preventing Jaw from Rotating," Proceedings of the KINPR 2003 Autumn Annual Meeting, pp. 365-368.
  9. "ANSYS User's Manual," ANSYS Inc.,(1992)

Cited by

  1. Structural optimization for a jaw using iterative Kriging metamodels vol.22, pp.9, 2008, https://doi.org/10.1007/s12206-008-0704-2
  2. Study on Optimal Design of Traverse Switch System for Maglev Train vol.19, pp.6, 2016, https://doi.org/10.7782/JKSR.2016.19.6.717
  3. Shape and Thickness Optimization of an Aluminium Duo-type LPG Tank for a Passenger Car vol.21, pp.2, 2013, https://doi.org/10.7467/KSAE.2013.21.2.131