소성∙가공 (Transactions of Materials Processing)

  • 제15권6호
  • /
  • Pages.421-427
  • /
  • 2006
  • /
  • 1225-696X(pISSN)
  • /
  • 2287-6359(eISSN)
한국소성∙가공학회 (The Korean Society for Technology of Plasticity and materials processing)
권호 표지
DOI QR코드

DOI QR Code

미세 Si 입자를 고려한 Al-1%Si 본딩 와이어의 신선공정해석

FE-simulation of Drawing Process for Al-1%Si Bonding Wire Considering Fine Si Particle

  • 고대철 (부산대학교 동남권부품소재산학협력혁신연구소) ;
  • 황원호 (부산대학교 대학원 정밀기계공학과) ;
  • 이상곤 (부산대학교 대학원 정밀기계공학과) ;
  • 김병민 (부산대학교 정밀기계공학과)
  • 발행 : 2006.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Drawing process of Al-1%Si bonding wire considering fine Si particle is analyzed in this study using FE-simulation. Al-1%Si boding wire requires electric conductivity because Al-1%Si bonding wire is used for interconnection in semiconductor device. About 1% of Si is added to Al wire for dispersion-strengthening. Distribution and shape of fine Si particle have strongly influence on the wire drawing process. In this study, therefore, the finite-element model based on the observation of wire by continuous casting is used to analyze the effect of various parameters, such as the reduction in area, the semi-die angle, the aspect ratio, the inter-particle spacing and orientation angle of the fine Si particle on wire drawing processes. The effect of each parameter on the wire drawing process is investigated from the aspect of ductility and defects of wire. From the results of the analysis, it is possible to obtain the important basic data which can be guaranteed in the fracture prevention of Al-1 %Si wire.

키워드

참고문헌

  1. 임차용, 우의성, 1990, 방향성 알루미늄 합금 개발 및 재료특성 규명에 관한 연구(II), 한국기계 연구원, pp. 28-32
  2. W. Qin, R. Doyle, T. Scharr, M. Shah, M. Kottke, G. Chen, D. Theodore, 2004, Surface oxide evolution on Al-Si bond wires for high-power RF applications Microelectronic Engineering, Vol. 75, pp. 111-116 https://doi.org/10.1016/j.mee.2003.12.052
  3. Hoon Cho, Hyung-Ho Jo, Sang-Gon Lee, Byung-Min Kim, Young-Jig Kim, 2002, Effect of reduction ratio, inclusion size and distance between inclusions on wire breaks in Cu fine wiredrawing, Journal of Materials Processing Technology, Vol. 130-131, pp. 416-420 https://doi.org/10.1016/S0924-0136(02)00719-7
  4. Martin Gagne, Eric Thibault, 1999, Control of inclusion characteristics in direct cast steel billets, Canadian Metallurgical Quarterly, Vol. 38, No. 5, pp. 311-321 https://doi.org/10.1016/S0008-4433(99)00026-9
  5. R D. Hodgson, 1996, Microstructure modeling for property prediction and control, Journal of Materials Processing Technology, Vol. 60, pp. 27-33 https://doi.org/10.1016/0924-0136(96)02304-7
  6. Kazutake Komori, 1999, Simulation of chevron crack formation and evolution in drawing, International Journal of Mechanical Sciences, Vol. 41, pp. 1499-1513 https://doi.org/10.1016/S0020-7403(98)00101-5
  7. 박동인, 김병민, 오상수, 2004, 유한요소법에 의한 Bi2223 고온 초전도 선재의 다심 인발에 대한 연구, 한국소성가공학회, Vol. 13, No. 1, pp. 78-83
  8. Ulrich T. Riedel, Wolfgang Bleck, John E. Morgan, Felicity J. Guild, Chris A. McMahon, 1999, Finite element modelling of the effect of non-metallic inclusions in metal forming processes, Computational Materials Science, Vol. 16, pp. 32-38 https://doi.org/10.1016/S0927-0256(99)00043-9
  9. D. C. Ko, B. S. Kang, B. M. Kim, J. C. Choi, 1994, A study on Prevention of General Burst Defects in Wire Drawing, The Korean society of mechanical engineering, Vol 11, pp. 3098-3310
  10. M. G. Cockcroft, D. J. Latham, 1968, Ductility and the workability of metals, J. Inst. Metals, Vol 96, pp. 33-39
  11. Jan W. Pilarczyk, 1997, Hydrodynamic drawing effects on wire ASTRO characteristics, Wire Journal International, pp. 70-83
  12. L. Godecki, 1972, Influence of the drafting schedule and die angle on properties of steel spring wire, Wire Industry, No. 6, p. 518
  13. N. Lamber, T. Greday, 1974, Microstructure and deformation of high carbon wire, CRM, September, No. 4, p. 43