DOI QR코드

DOI QR Code

점진 전개기법 및 유한요소 역해석법을 이용한 자동차 패널 트리밍 라인 설계

Trimming Line Design using Incremental Development Method and Finite Element Inverse Method

  • 정완진 (서울산업대학교 금형설계학과) ;
  • 박춘달 (부산대학교 정밀기계공학과) ;
  • 송윤준 (건국대학교 기계설계학과) ;
  • 오세욱 (현대자동차 금형기술개발팀)
  • 발행 : 2006.09.01

초록

In most of automobile body panel manufacturing, trimming process is generally performed before flanging. To find feasible trimming line is crucial in obtaining accurate edge profile after flanging. Section-based method develops blank along manually chosen section planes and find trimming line by generating loop of end points. This method suffers from inaccurate results of edge profile. On the other hand, simulation-based method can produce more accurate trimming line by iterative strategy. In this study, new fast simulation-based method to find feasible trimming line is proposed. Finite element inverse method is used to analyze the flanging process because final shape after flanging can be explicitly defined and most of strain paths are simple in flanging. In utilizing finite element inverse method, the main obstacle is the initial guess generation for general mesh. Robust initial guess generation method is developed to handle genera] mesh with very different size and undercut. The new method develops final triangular mesh incrementally onto the drawing tool surface. Also in order to remedy mesh distortion during development, energy minimization technique is utilized. Trimming line is extracted from the outer boundary after finite element inverse method simulation. This method has many advantages since trimming line can be obtained in the early design stage. The developed method is verified by shrink/stretch flange forming and successfully applied to the complex industrial applications such as door outer flanging process.

키워드

참고문헌

  1. R. Sowerby, J. L. Duncan, E. Chu, 1986, The modeling of sheet metal forming, Int. J. Mech. Sci.. Vol. 28, pp. 415-490 https://doi.org/10.1016/0020-7403(86)90062-7
  2. G. N. Blount, P. R. Stevens, 1990, Blank shape analysis for heavy gauge metal forming, J. of Material Processing Technology, Vol.24, pp. 65-74 https://doi.org/10.1016/0924-0136(90)90169-U
  3. Autoform Manual, 2004
  4. Wan-Jin Chung, Hyun-Bo Shim, Choon-Dal Park, Se-Wook Oh, 2004, Optimal trimming line design for flanging using one step FEM, the 55th Japanese Joint Conference for the Technology of Plasticity, pp. 187-188
  5. W. J. Chung, C. D. Park, D. Y. Yang, 2005, Trimming Line Design using New Development Method and One Step FEM, Proceedings of NUMISHEET 2005, pp. 837-842
  6. Hyun Bo Shim, 2006, Geometrical mapping for triangular element. Part 2: trimming-line design for flanging operation, Proc. IMechE, Vol. 220 Part B:J. Engineering Manufacture, accepted publication
  7. K. Chung, O. Richmond, 1992, Ideal forming-2. Sheet forming with optimum deformation, Int. J. Mech. Sci., Vol. 34, pp. 617-633 https://doi.org/10.1016/0020-7403(92)90059-P
  8. 이충호, 허훈, 1997, 박판금속성형의 초기 블랭크 최적설계를 위한 삼차원 다단계 역해석, 대한기계학회논문집 A 권, 제 21 권 제 12 호, pp. 2055-2067
  9. 김승호, 김세호, 허훈, 2001, 다단계 유한요소 역해석을 이용한 세장비가 큰 직사각컵 성형 공정의 해석, 한국소성가공학회지, 제 10 권 제 5 호, pp. 389-395
  10. C. Bennis, J. M. Vezien, G lglesias, 1991, Comput. Graphics, Vol. 25, pp. 237-246 https://doi.org/10.1145/127719.122744
  11. J. Malliot, H. Yahia, A. Verroust, Comput. Graphics, 1994, Vol. 27, pp. 27-34 https://doi.org/10.1016/S0097-8493(02)00222-4

피인용 문헌

  1. Study on autobody of lancing process method using forming analysis vol.18, pp.sup2, 2014, https://doi.org/10.1179/1432891714Z.000000000558