References
- Ikuta, K. and Hirowatari, K., 'Real three dimensional micro fabrication using stereolithography and metal molding,' Proceedings of the 6th IEEE Workshop on Micro Electro Mechanical Systems(MEMS'93), Fort Lauderdale, FL, USA, pp, 42-47, 1993 https://doi.org/10.1109/MEMSYS.1993.296949
- Ikuta, K., Ogata, T., Tsuboi, M. and Kojima, S., 'Development of mass productive micro stereo lithography,' Proceedings of the 8th IEEE Workshop on Micro Electro Mechanical Systems(MEMS'96), Piscataway, NJ, USA, pp. 301-306, 1996 https://doi.org/10.1109/MEMSYS.1996.493998
- Ikuta, K., Maruo, S. and Kojima, S., 'New micro stereo lithography for freely movable 3D micro structure - Super IH Process with submicron resolution,' Proceedings of the 11th IEEE Workshop on Micro Electro Mechanical Systems(MEMS'98), Heidelberg, Germany, pp. 290-295, 1998 https://doi.org/10.1109/MEMSYS.1998.659770
- Ikuta, K., Maruo, S., Fujisawa, T. and Yamada, A., 'Micro concentrator with opto-sense micro reactor for biochemical IC chip family - 3D composite structure and experimental verification,' Proceedings of the 12th IEEE Workshop on Micro Electro Mechanical Systems(MEMS'99), Orlando, Florida, USA, pp. 376-381, 1999 https://doi.org/10.1109/MEMSYS.1999.746858
- Ikuta, K., Hasegawa, T., Adachi, T. and Maruo, S., 'Fluid drive chips containing multiple pumps and switching valves for biochemical IC family,' Proceedings of the 8th IEEE Workshop on Micro Electro Mechanical Systems(MEMS 2000), pp. 739-744, 2000 https://doi.org/10.1109/MEMSYS.2000.838610
- Maruo, S., Ikuta, K. and Korogi, H., 'ForceControllable, Optically Driven Micromachines Fabricated by Single-Step Two-Photon Microstereolithography,' Journal of Microelectro mechanical Systems, Vol. 12, No. 5, pp. 533-539, 2003 https://doi.org/10.1109/JMEMS.2003.817894
- Lim, T. W., Park, S. H. and Yang, D. Y., 'Contour Offset Algorithm(COA) for Precise Patterning in Two-photon Polymerization,' Microelectronic Engineering, Vol. 77, pp. 382-388, 2005 https://doi.org/10.1016/j.mee.2005.01.022
- Zhang, X., Jiang, X. N. and Sun, C., 'Micro-stereolithography of polymeric and ceramic microstructures,' Sensors and Actuators 77, pp. 149-156, 1999 https://doi.org/10.1016/S0924-4247(99)00189-2
- Sun, C. and Zhang, X., 'Experimental and numerical investigations on microstereolithography of ceramics,' Journal of Applied Physics, Vol. 92, No.8, pp. 4796-4802, 2002 https://doi.org/10.1063/1.1503410
- Lee, I. H. and Cho, D. W., 'An Investigation on Photopolymer Solidification Considering Laser Irradiation Energy in Micro-stereolithography,' Microsystem Technologies, Vol. 10, No. 8, pp. 592-598, 2004 https://doi.org/10.1007/s00542-003-0337-4
- Varadan, V. K., Jiang, X. and Varadan, V. V., 'Microstereolithography and other Fabrication Techniques for 3D MEMS,' Wiley, 2001
- Lee, I. H., Cho, Y. H., Cho, D. W. and Lee, E. S., 'Development of micro-stereolithography system for the fabrication of three-dimensional micro-structures,' Journal of KSPE, Vol. 21, No. 2, pp. 186-194, 2004
- Lee, I. H., Cho, D. W. and Lee, E. S., 'Photopolymer Solidification Phenomena Considering Laser Exposure Conditions in Micro-stereolithography Technology,' Journal of KSPE, Vol. 21, No. 3, pp. 171-179, 2004
- Park, S. H., Lim, T. W. and Yang, D. Y, 'Investigation into direct fabrication of nano-patterns using nano-stereolithography(NSL) process,' Journal of KSPE, Vol. 23. No. 3, pp. 156-162, 2006
- Bertsch, A., Jezequel, J. Y. and Andre, J. C., 'Study of the spatial resolution of a new 3D microfabrication process: the microstereophotolithography using a dynamic mask-generator technique,' Journal of Photochemistry and Photobiology A: Chemistry 107, pp. 275-281, 1997 https://doi.org/10.1016/S1010-6030(96)04585-6
- Farsari, M., Claret-Tournier, F., Huang, S., Chatwin, C.R., Budgett, D.M., Birch, P.M., Young, R.C.D. and Richardson, J.D., 'A novel high-accuracy microstereolithography method employing an adaptive electro-optic mask,' Journal of Materials Processing Technology 107, pp. 167-172, 2000 https://doi.org/10.1016/S0924-0136(00)00672-5
- Provin, C. and Monneret, S., 'Complex Ceramic-Polymer Composite Microparts Made by Microstereolithography,' IEEE Transactions on Electronics Packaging Manufacturing, Vol. 25, No. 1, pp. 59-63, 2002 https://doi.org/10.1109/TEPM.2002.1000484
- Oda, G., Miyoshi, T., Takaya, Y, Ha, T. H. and Kimura, K., 'Microfabrication of Overhanging Shape using LCD Microstereolithography,' 5th International Symposium on Laser Precision Microfabrication, Proceedings of SPIE, Vol. 5662, pp. 649-654, 2004 https://doi.org/10.1117/12.596758
- Bertsch, A., Bernhard, P., Vogt, C. and Renaud, P., 'Rapid prototyping of small size objects,' Rapid Prototyping Journal, Vol. 6, No. 4, pp. 259-266, 2000 https://doi.org/10.1108/13552540010373362
-
Smith, L. B., 'Micro-Cross-Sectional Lithography (
${\mu}CLS^TM ) :Prototyping and Packaging for MEMS,' Ph. D. Thesis, Rensselaer Polytechnic Institute, 2004 - Bertsch, A., Jiguet, S. and Renaud, P., 'Microfabrication of ceramic components by microstereolithography,' Journal of Micromechanics and microengineering, Vol. 14, pp. 197-203, 2004 https://doi.org/10.1088/0960-1317/14/2/005
- Limaye, A. S., 'Design and Analysis of a Mask Projection Micro-stereolithography System,' M.S. Thesis, Georgia Institute of Technology, 2004
- Sun, C., Fang, N., Wu, D. M. and Zhang, X., 'Projection micro-stereo lithography using digital micro-mirror dynamic mask,' Sensors and Actuators A: Physical, Vol. 121, No. 1, 31, pp. 113-120, 2005 https://doi.org/10.1016/j.sna.2004.12.011
- Choi, J. W., Ha, M. Y. Won, M. H., Choi, K. H. and Lee, S. H., 'Fabrication of 3-Dimensional Microstructures using Dynamic Image Projection,' Proceeding of the 1st International Conference on Precision Engineering and Micro/Nano Technology in Asia, Shenzhen, China, pp. 472-476, 2005