Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

The Equipment Design by the Fluid and Thermal Analysis of the Electromagnetic Pump for Recycling of Aluminum Scrap

알루미늄 스크랩의 재활용을 위한 전자기장 펌프의 열 유동 해석에 의한 장비 설계

  • 최우식 (부산대학교 대학원 정밀 기계공학과) ;
  • 강충길 (부산대학교 기계공학부)
  • Published : 2006.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, to design aluminum scrap recycling equipment, fluid flow and thermal analysis considering electromagnetic phenomenon were carried out by using ANSYS program. The magnetic flux generated by electromagnetic pump has influence on fluid velocity of Al liquid metal with molten metal motion and thermal generation. To investigate the effect of the number of phase on fluid flow and thermal generation, electromagnetic force and magnetic flux were obtained by computer simulation. In addition, the results obtained by fluid flow and thermal analysis, recycling equipment of aluminum scrap with the cooling technology of electromagnetic coil, the most suitable phase and current were proposed.

Keywords

References

  1. Karl, H. S., Mathias, D. and Klaus, S., 'Rotational Electromagnetic Stirring in Continuous Casting of Round Strands,' Metallurgical Transactions B, Vol. 17B, pp. 119-521, 1986
  2. Fawwaz, T. Ulaby, 'Fundamentals of Applied Electromagnetics,' Kyobo, pp145-147, 2001
  3. Choi, Dong-Hyuk and Kim, Jae-Woong, 'A study on the numerical Analysis of Magnetic Flux Density by a Solenoid for MIAB Welding,' Journal of the Korean Society of Precision Engineering, Vol. 18, No.12, pp73-81, 2001
  4. Han-Gyu, 'Engineering Electromagnetics,' Hee-jung-dang, pp311-325, 1990
  5. Park, Song-Bae, 'New Circuit Theory,' Moon？woon-dang, pp93-99, 1998
  6. Moros, A. and Hunt, J. C. R., 'Recirculating flows in the cross-section of a channel induction furnace,' Int. J. Heat Mass Transfer, Vol.31, No.7, pp.1500-1501,1998
  7. Physics compilation committee of Pusan National University, 'General Physics,' Bando, pp.730-732, 1999
  8. Jean-Luc, M., Francis, D., Rene, R. and Charels, V., 'Steady Flow of Liquid Aluminum in a Rectangular- Vertical Ingot Mold, Thermally of Electromagnetically Activated,' Metallurgical Transactions B, Vol. 15B, pp471-472, 1984