DOI QR코드

DOI QR Code

A Study on Multi-Layered EM Wave Absorber Using Natural Lacquer as a Binder

  • Choi, Dong-Han (Research Institute of Industrial Technology, Korea Maritime University) ;
  • Kim, Dong-Il (Radio Sciences & Engineering, Korea Maritime University) ;
  • Choi, Chang-Mook (Radio Sciences & Engineering, Korea Maritime University) ;
  • Li, Rui (Radio Sciences & Engineering, Korea Maritime University)
  • Published : 2006.12.31

Abstract

Generally, a silicone rubber and a chlorinated polyethylene(CPE) have been used as a binder for the development of high-performance composite EM(Electro Magnetic) wave absorbers. In this paper, the EM wave absorption performance of natural lacquer, which is newly proposed as a binder was investigated. The prepared MnZn ferrite EM wave absorbers are mixed with natural lacquer showed excellent EM wave absorption characteristics compared with MnZn ferrite EM wave absorbers which are mixed with the conventional binders. MnZn ferrite EM wave absorbers mixed with natural lacquer were prepared and their absorption ability was also investigated The EM wave absorbers are fabricated in different proportions of MnZn, or NiZn ferrite and natural lacquer, and their reflection coefficients are measured. The permittivity and permeability are calculated by using the measured reflection coefficients. The EM wave absorption abilities are calculated according to different thicknesses of the EM wave absorbers.

Keywords

References

  1. Hashimoto, Y.(1983), 'The application of ferrite as an absorber', Jap. J. Appl. Phys., Vol.6, No. 3, pp. 175-177
  2. Hashimoto, Y., Kurihara, H., Ishino, K.(1988), 'Electromagnetic Absorbing Wall for TV Ghost Suppression', EMCJ88-6, pp. 37-44
  3. Hong, J. W., Park, M. Y., Kim, H. K., Park, K. J.(2000), 'The Study on Properties of Modified Oriental Lacquer Coating Through UV -Curable Acryl Monomer' J. Korean Ind. Eng. Chem., Vol. 11, No 6, 693-696
  4. Kim, D. I., Park, Y. J. Kim, H. G., Guen, S. G.(1999), 'A Study on Electromagnetic Wave Absorbing Properties of Complex Isotropic Ferrite-Rubber Composite', Journal of The Korea Institute of Maritime Information & Communication Sciences, Vol. 3, No. 1 pp. 35-42
  5. Kim, D. I., Bae, J. Y., Son, J. Y., Won, Y. S., Song, J. M. (2001), 'A Study on Fabrication and Evaluation of Ferrite Electromagnetic Wave Absorber', Journal of The Korea Electromagnetic Engineering Society, Vol. 1, No. 1, pp. 95-99
  6. Kotsuka, Y.(1997), 'Ferrite Electromagnetic Wave Absorber', Journal of The Japan Institute of Application Magnetics, Vol. 21, No. 10, pp. 1159-1166
  7. Park, Y. J., Kim, D. I. (1999), 'A Study on Electromagnetic Wave Absorbing Properties of Ni-Mn-Zn Spinel Ferrite-Rubber Composite', Journal of The Korean Institute of Navigation, pp. 15-22