한국자동차공학회논문집 (Transactions of the Korean Society of Automotive Engineers)

  • 제14권4호
  • /
  • Pages.132-138
  • /
  • 2006
  • /
  • 1225-6382(pISSN)
  • /
  • 2234-0149(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지

중공 원추형 연료 분무의 미립화 및 벽 충돌 과정에 대한 연구

A Study on Atomization and Wall Impingement Process of Hollow-Cone Fuel Spray

  • Shim, Young-Sam (Graduate School of Mechanical Engineering, Pusan National University) ;
  • Choi, Gyung-Min (School of Mechanical Engineering, Pusan National University) ;
  • Kim, Duck-Jool (School of Mechanical Engineering, Pusan National University)
  • 발행 : 2006.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Numerical analysis about atomization and wall impingement process of hollow-cone fuel spray is performed by a modified KIVA code with hybrid model. The atomization process is modeled by using hybrid breakup model that is composed of Linearized Instability Sheet Atomization(LISA) model and Aerodynamically Progressed Taylor Analogy Breakup(APTAB) model. The Gosman model, which is based on the droplet behaviors after impingement determined by experimental correlations, is used for spray-wall impingement process. The LIEF technique was used to compare the results with those of experiment. The calculations and experiments are carried out at the ambient pressures of 0.1 MPa and 0.5 MPa and the ambient temperature of 293K. It was found that the calculated results show satisfactory agreement with experimental ones.

키워드

참고문헌

  1. F. Zhao, J. Yoo, Y. Liu and M. Lai, 'Spray Dynamics of High Pressure Fuel Injector for DI Gasoline Engines,' SAE 961925, 1996
  2. S. C. Hwang, D. S. Choi and D. J. Kim, 'Characteristics of Spray Development from Vapor/Liquid Phase Distribution for GDI Spray,' Transactions of KSAE, Vol.9, No.2, 2001
  3. C. Beatrice, P. Belardini, C. Bertoli, M. C. Cameretti and N. C. Cirillo, 'Fuel Jet Models for Multidimensional Diesel Combustion Calculation: An Update,' SAE 950086, 1995
  4. P. J. O'Rourke and A. A. Amsden, 'The TAB Method for Numerical Calculation of Spray Droplet Breakup,' SAE 872089, 1987
  5. R. D. Reitz, 'Modeling Atomization Process in High-Pressure Vaporizing Spray,' Atomization and Spray Technology, Vol.3, pp.309-337, 1987
  6. D. P. Schmidt, J. K. Martin, and R. D. Reitz, 'Pressure-Swirl Atomization in the Near Field,' SAE 1999-01-0496, 1999
  7. A. P. Walkins and K. Park, 'Assessment and Application of A New Spray Wall Impaction Model,' Computers in Reciprocating Engines and Gas Turbine, I. Mech. E, pp.1-10, 1996
  8. J. Senda, M. Kobayashi, S. Iwashita and H. Fujiomoto, 'Modeling of Diesel Spray Impingement on A Flat Wall', SAE 941894, 1994
  9. C. Bai and D. Gosman, 'Development of Methodology for Spray Impingement Simulation,' SAE 950283, 1995
  10. A. A. Amsden, T. D. Butler and P. J. O'Rourke, KIVA-II: A Computer Program for Chemically Reactive Flows with Sprays, Los Alamos National Laboratory Report, LA-11560-MS, 1989
  11. Y. S. Sim, S. C. Hwang and D. J. Kim, 'The Numerical Study on Reakup and Vaporization Process of GDI Spray under High-Temperature and High-Pressure Conditions,' Transactions of KSAE, Vol.12, No.3, 2004
  12. J. H. Park, S. S. Hwang, and Y. B. Yoon, 'Aerodynamically Progressed Taylor Analogy Breakup(APTAB) Model for Accurate Prediction of Spray Droplet Deformation and Breakup,' ILASS-Korea, Vol.5, No.2, pp.53-60, 2000