Transactions of the Korean Society of Automotive Engineers (한국자동차공학회논문집)

The Korean Society of Automotive Engineers (한국자동차공학회)
권호 표지

Thermoelastic Instability in Functionally Graded Materials

경사기능재료에서의 열탄성 불안정성

  • Published : 2006.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

A transient finite element simulation is developed for the two-dimensional thermoelastic contact problem of a stationary functionally graded material between sliding layers, with frictional heat generation. Thermoelastic instability in functionally graded materials is investigated. The critical speed of functionally graded material coating disk is larger than that of the conventional steel disk. The effect of the nonhomogeneity parameter in functionally graded material is also investigated. The results show that functionally gradient materials restrain the growth of perturbation and delay the contact separation.

Keywords

References

  1. J. R. Barber, 'Thermoelastic Instabilities in the Sliding of Conforming Solids,' Proc. R. Soc. London, Ser. A. 312, pp.381-394, 1969
  2. A. E. Anderson and R. A. Knapp, 'Hot Spotting in Automotive Friction Systems,' Wear, Vol.135, pp.319-337, 1990 https://doi.org/10.1016/0043-1648(90)90034-8
  3. K. Lee and R. B. Dinwiddie, 'Conditions of Frictional Contact in Disk Brakes and Their Effects on Brake Judder,' SAE 980598, 1998
  4. R. A. Burton, V. Nerlikar and S. R. Kilaparti, 'Thermoelastic Instability in a Seal-like Configuration,' Wear, Vol.24, pp.177-188, 1973 https://doi.org/10.1016/0043-1648(73)90230-5
  5. K. Lee and J. R. Barber, 'Frictionally Excited Thermoelastic Instability in Automotive Disk Brakes,' Journal of Tribology, Vol.115, pp.605-614, 1993
  6. P. Zagrodzki, K. B. Lam, E. Al Bahkali and J. R. Barber, 'Nonlinear Transient Behavior of a Sliding System With Frictionally Excited Thermoelastic Instability,' Journal of Tribology, Vol.123, pp.669-708, 2001
  7. J.-H. Choi, D.-H. Kim and I. Lee, 'Study on Thermoelastic Instability of Automotive Disc Brakes,' Journal of KSNVE, Vol.II, pp.315-322, 2001
  8. T.-W. Ha, Y.-G. Joe, H.-S. Kim, J.-Y. Lee and J.-E. Oh, 'Thermoelastic Instability of the Layer Sliding between Two Rigid Nonconducting Half-planes,' Transactions of KSAE, Vol.12, No.1, pp.114-121, 2004
  9. F. A. Lyod and W. O. Silverthorne II, 'The Effect of Modulus and Thermal Diffusivity on Sintered Metal Performance,' SAE 2001-01-1438, 2002
  10. G. R. Liu and X. Han, 'An Inverse Procedure for Determination of Material Property of FGM,' Center for Advanced Computations in Engineering Science C/o Department of Mechanical Engineering National University of Singapore
  11. Y. D. Lee and F. Erdogan, 'Residual/Thermal Stresses in FGM and Laminated Thermal Barrier Coatings,' International of Fracture, Vol.69, pp.145-165, 1995 https://doi.org/10.1007/BF00035027
  12. T. Fujimoto and N. Noda, 'Influence of the Compositional Profile of Functionally Graded Material on the Crack Path under Thermal Shock,' J. Am. Ceram. Soc., Vol.84, pp.1480-1486, 2001
  13. S. Sarraute, O. T. Sorensen and B. F. Sorensen, 'Microstructure Dependent Thermophysical Properties of Ni-Zn Ferrite-BaTio3 Functionally Graded Ceramics,' Journal of Materials Science, Vol.34, pp.99-104, 1999 https://doi.org/10.1023/A:1004417708696
  14. ABAQUS, Theory Manual, Version 6.5, HKS, 2005