Abstract
The objectives of this study were to investigate the affecting factors on streaming current(SC) and to evaluate set point(SP). For the study, a pilot scale apparatus with a capacity of 12 L/min was operated at Guui water intake of Seoul. SC was monitored with varying poly aluminium chlorides(PACs) dose and water quality parameters like conductivity, turbidity, temperature, and pH. The removal efficiencies were evaluated in terms of turbidity and dissolved organic carbon(DOC) with varying coagulation conditions. The effects of affecting factors on SC and SP were also estimated. According to the result observed from the variation of SC with water quality parameters during the experimental period, tendencies of SC and conductivity were very similar, and SC and conductivity had a strong linear relation. At the optimum condition of coagulation, SP decreased as the rainy season changed to the dry season, during the experimental period. Especially, in condition of low turbidity, conductivity had relatively more effect on SC than turbidity. As conductivity increased, SP decreased and coagulant dose per unit increase of SC gradually increased. In view of the results so far obtained, it may be possible to determine the SP range considering the real time variation of water quality, especially conductivity.
본 연구에서는 원수의 수질 변화 중 SC에 대한 영향 인자와 이런 인자가 streaming current(SC) 및 set point(SP)에 미치는 영향 정도를 조사하였다. 서울시 구의 취수장의 전염소 처리되지 않은 원수를 실험에 사용하였다. Pilot scale 실험을 통하여 원수 수질 변화에 따른 SC의 변화와 응집제인 poly aluminium chlorides(PACs)의 변화에 따른 SC의 변화를 알아보았다. 또한, 탁도와 용존유기탄소(dissolved organic carbon, DOC)의 처리 효율에 대한 인자들의 영향에 대하여 평가하였다. 실제 한강 원수를 대상으로 일정 기간 동안 원수의 수질과 SC의 변화를 관찰한 결과, SC와 전기전도도가 높은 상관성을 보임을 알 수 있었다. SC를 기준으로 응집 처리한 결과, 최적 응집 조건으로 대표되는 SC, 즉 SP가 연구기간 동안 우기에서 건기로 변화함에 따라 감소하는 경향을 보였다. 특히 원수의 수질이 저탁도 일 때, 탁도에 비해 전기전도도가 SC에 미치는 영향이 상대적으로 증가하는 것으로 나타났다. 전기전도도가 SC와 SP 그리고 응집에 미치는 영향에 대한 실험을 수행한 결과 전기전도도가 증가할수록 SP는 감소하였고, 단위 SC 증가를 위해 주입된 응집제의 양은 점점 증가하였다. 이상의 결과를 통해 볼 때, 응집 공정의 최적 제어를 위해 SC를 이용한 응집 제어는 매우 효율적으로 수행할 수 있었으며, 특히 SP 설정을 위해서는 원수의 수질 특히 전기전도도의 실시간 측정을 고려할 필요가 있는 것으로 나타났다.