The Effect of Clay Concentration on Mechanical and Water Barrier Properties of Chitosan-Based Nanocomposite Films

  • Published : 2006.12.31

Abstract

Chitosan-based nanocomposite films were prepared using a solution intercalation method incorporating varying amounts of organically modified montmorillonite (Cloisite 30B) from 0 to 30 wt%. The nanocomposite films prepared were optically clear despite a slight decrease in the transmittance due to the spatial distribution of nanoclay. X-ray diffraction patterns indicated that a certain degree of intercalation or exfoliation formed when the amount of clay in the film was low and that microscale tactoids formed when the clay content in the sample was high (more than 10 wt%). The tensile strength (TS) of the chitosan film increased when the clay was incorporated up to 10 wt% and then decreased with further increases in the clay content of the film. The elongation at break (E) increased slightly upon the addition of low levels of clay up to 5 wt% and then decreased with further increases in the amount of the clay in the film. The water vapor permeability (WVP) decreased exponentially with increasing clay content. The water solubility (WS) and swelling ratio (SR) of the nanocomposite films decreased slightly, indicating that the water resistance of the chitosan film increased due to the incorporation of the nanoclay.

Keywords

References

  1. Krochta JM, De Mulder-Johnston C. Edible and Biodegradable polymer films: Challenges and opportunities. Food Technol.-Chicago 51: 61-74 (1997)
  2. Kaplan DL. Introduction to biopolymers from renewable resources. pp. 1-29. In: Biopolymers from Renewable Resources. Kaplan DL (ed). Springer-Verlag, Berlin, Germany (1988)
  3. Petersen K, Nielsen PV; Berteksen G, Lawther M, Olsen MB, Nilsson NH, Mortensen G Potential of biobased materials for food packaging. Trends Food Sci. Tech. 10: 52-68 (1999) https://doi.org/10.1016/S0924-2244(99)00019-9
  4. Mohanty AK, Misra M, Drzal LT, Selke SE, Harte BR, Hinrichsen G. Natural fibers, biopolymers, and biocomposites: An introduction. pp. 1-36. In: Natural Fibers, Biopolymers, and Biocomposites. Mohanty AK, Misra M, Drzal LT (eds). CRC Press, Inc., Boca Raton, FL, USA (2005)
  5. Clarinval AM, Halleux J. Classification of biodegradable polymers. pp. 3-31. In: Biodegradable Polymers for Industrial Applications. Smith R (ed). CRC Press, Inc., Boca Raton, FL, USA (2005)
  6. Shahidi F, Arachchi JKV, Jeon YJ. Food application of chitin and chitosan. Trends Food Sci. Tech. 10: 37-51 (1999) https://doi.org/10.1016/S0924-2244(99)00017-5
  7. Rhim JW, Weller CL, Ham KS. Characteristics of chitosan films as affected by the type of solvent acid. Food Sci. Biotechnol. 7: 263-268 (1998)
  8. Park SY, Marsh KS, Rhim JW. Characteristics of different molecular weight chitosan films affected by the type of organic solvents. J. Food Sci. 67: 194-197 (2002) https://doi.org/10.1111/j.1365-2621.2002.tb11382.x
  9. Chung D, Kim SM, Kim WT, Shin IS, Park H. Characteristics of films based on chitosans isolated from Todarodes pacificus. Food Sci. Biotechnol. 14: 433-436 (2005)
  10. Papieau AM, Hoover DO, Knorr D, Farkas DF. Antimicrobial effect of water-soluble chitosans with high hydrostatic pressure. Food Biotechnol. 5: 45-57 (1991) https://doi.org/10.1080/08905439109549790
  11. Sudharshan NR, Hoover DO, Knorr D. Antibacterial action of chitosan. Food Biotechnol. 6: 257-272 (1992) https://doi.org/10.1080/08905439209549838
  12. Fang SW, Li CF, Shih DYC. Antifungal activity of chitosan and its preservative effect on low-sugar candied Kumquat. J. Food Protect. 56: 136-140 (1994)
  13. Wang G. Inhibition and inactivation of five species of foodbome pathogens by chitosan. J. Food Protect. 55: 916-919 (1992) https://doi.org/10.4315/0362-028X-55.11.916
  14. Ghaouth AE, Ami J, Ponnampalam R, Boulet M. Chitosan coating effect on storability and quality of fresh strawberries. J. Food Sci. 56: 1618-1620 (1991) https://doi.org/10.1111/j.1365-2621.1991.tb08655.x
  15. Zhang D, Quantick Pc. Effects of chitosan coating on enzymatic browning and decay during postharvest storage of litchi (Litchi chinensis Sonn.) fruit, Postharvest Biol. Tec. 12: 195-202 (1997) https://doi.org/10.1016/S0925-5214(97)00057-4
  16. Darmadji P, Izumimoto M. Effect of chitosan in meat preservation. Meat Sci. 38: 243-254 (1994) https://doi.org/10.1016/0309-1740(94)90114-7
  17. Quattara B, Simard RE, Piette G, Begin A, Holly RA. Inhibition of surface spoilage bacteria in processed meats by application of antimicrobial films prepared with chitosan. Int. J. Food Microbiol. 62: 139-148 (2000) https://doi.org/10.1016/S0168-1605(00)00407-4
  18. Jeon YJ, Kamil JYVA, Shahidi F. Chitosan as an edible invisible film for quality preservation of herring and Atlantic cod. J. Agr. Food Chem. 50: 5167-5178 (2002) https://doi.org/10.1021/jf011693l
  19. Kienzle-Sterzer CA, Rodriguez-Sanchez D, Rha C. Mechanical properties of chitosan films: effect of solvent acid. Macromol. Chem. 183: 1353-1359 (1982) https://doi.org/10.1002/macp.1982.021830528
  20. Rhim JW, Hong SI, Park HM, Ng PKW. Preparation and characterization of chitosan-based nanocomposite films with antimicrobial activity. J. Agr. Food Chem. 54: 5814-5822 (2006) https://doi.org/10.1021/jf060658h
  21. Lin KF, Hsu CY, Huang TS, Chiu WY, Lee YH, Young TH. A novel method to prepare chitosanlmontmorillonite nanocomposites. J. Appl. Polym. Sci. 98: 2042-2047 (2005) https://doi.org/10.1002/app.22401
  22. Xu Y, Ren X, Hanna MA. Chitosanlclay nanocomposite film preparation and characterization. J. Appl. Polym. Sci. 99: 1684-1691 (2006) https://doi.org/10.1002/app.22664
  23. Wang SF, Shen L, Tong YJ, Chen L, Phang IY, Lim PQ, Liu TX. Biopolymer chitosanlmontmorillonite nanocomposites: preparation and characterization. Polym. Degrad. Stabil. 90: 123-131 (2005) https://doi.org/10.1016/j.polymdegradstab.2005.03.001
  24. Darder M, Colilla M, Ruiz-Hitzky E. Biopolymer-clay nanocomposites based on chitosan intercalated in montmorillonite. Chem. Mater. 15: 3774-3780 (2003) https://doi.org/10.1021/cm0343047
  25. Alexandre M, Dubois P. Polymer-layered silicate nanocomposites: preparation, properties and use of a new class of materials. Mater. Sci. Eng. 28: 1-63 (2000) https://doi.org/10.1016/S0927-796X(00)00012-7
  26. Pandey JK, Kumar AP, Misra M, Mohanty AK, Drzal LT, Singh RP. Recent advances in biodegradable nanocomposites. J. Nanosci. Nanotech. 5: 497-526 (2005) https://doi.org/10.1166/jnn.2005.111
  27. Sinha Ray S, Bousmina M. Biodegradable polymers and their layered silicate nanocomposites: In greening the 21 st century materials world. Prog. Mater. Sci. 50: 962-1079 (2005) https://doi.org/10.1016/j.pmatsci.2005.05.002
  28. Sinha Ray S, Okamoto M. Polymerllayered silicate nanocomposites: a review from preparation to processing. Prog. Polym. Sci. 28: 1539-1641 (2003) https://doi.org/10.1016/j.progpolymsci.2003.08.002
  29. Gennadios A, Weller CL, Gooding CH. Measurement errors in water vapor permeability of highly permeable, hydrophilic edible films. J. Food Eng. 21: 395-409 (1994) https://doi.org/10.1016/0260-8774(94)90062-0
  30. Rhim JW, Park JW, Jung ST, Park HJ. Formation and properties of com zein coated x-carrageenan films. Korean J. Food Sci. Technol. 29: 1184-1190 (1997)
  31. Park HM, Misra M, Drzal LT, Mohanty AK. 'Green' nanocomposites from cellulose acetate bioplastic and clay: Effect of ecofriendly triethyl citrate plasticizer. Biomacromolecules 5: 2281-2288 (2004) https://doi.org/10.1021/bm049690f
  32. Rhim JW, Lee JH, Kwak HS. Mechanical and barrier properties of soy protein and clay mineral composite films. Food Sci. Biotechnol. 14: 112-116 (2005)
  33. Strawhecher KE, Manias E. Structure and properties of poly(vinyl alcohol)/$Na^+$-montmorillonite nanocomposites. Chem. Mater. 12: 2943-2949 (2000) https://doi.org/10.1021/cm000506g
  34. Yano K, Usuki A, Okad A, Kurauchi T, Kamigaito O. Synthesis and properties of polyimide-clay hybrid. J. Polym. Sci. AI 31: 2493-2498 (1993) https://doi.org/10.1002/pola.1993.080311009
  35. Cussler EL, Highes SE, Ward WJ, Aris R. Barrier membranes. J. Membrane Sci. 38: 161-174 (1998) https://doi.org/10.1016/S0376-7388(00)80877-7
  36. Salamie M. Polyethylene, low density. pp. 514-523. In: The Wiley Encyclopedia of Packaging Technology. Bakker M (ed). John Wiley & Sons. New York, NY, USA (1986)