Experimental Study on the Fire Resistance of the iTECH Composite Beam

iTECH 합성보의 내화성능에 대한 실험연구

  • 이승재 (고려대학교 대학원 건축공학과) ;
  • 강성덕 (고려대학교 대학원 건축공학과) ;
  • 최승관 (한국건설기술연구원) ;
  • 김명한 (대진대학교 건축공학과) ;
  • 김상대 (고려대학교 건축공학과)
  • Received : 2006.06.15
  • Accepted : 2006.09.26
  • Published : 2006.10.27

Abstract

Thispaper presents the results of an experimental investigation into the fire performances ofsimply supported iTECH composite beams using an ISO834 standard fire. There are very few independent studies on the fire resistance of composite steel and concrete structures of various designs. The iTECH composite beam system has been used in construction, but nothing is known about its influence in a fire. To evaluate the fire resistance performanceof the iTECH beam, a test was conducted for 4.7m-span-length iTECH beams under given conditions in a laboratory. The fire resistance performance of unprotected coatings of the iTECH beam has been examined, and a longer period of fire resistance was achieved by increasing the beam coating's section size and decreasing its load ratio. Coatings for the fire protection of iTECH beams reduce the rate of temperature rise of the beam in case of fire, and the required thickness of spray-on fire protection coatings can be determined by means of tests.

본 연구에서는 iTECH 합성보 실험체에 대한 온도와 변형에 대한 내화성능을 ISO834 표준화재와 BS476-20 및 KSF2257 기준에 근거하여 평가하였다. 국내외적으로 복합구조의 내화성능을 규명하기 위한 연구는 지극히 미흡한 실정이며, 따라서 본 연구에서는 iTECH 합성보의 내화성능을 평가하기 위해 1.5m의 슬래브를 포함한 4..7m의 스팬길이에 대하여 실험을 수행하였다. 변수는 실험체의 단면크기, 피복재 보강방법과 보강두께, 그리고 하중비로 하여 내화실험을 수행하였다.

Keywords

References

  1. 건축구조부재의 내화시험방법 - 일반 요구사항 KS F 2257-1
  2. 건축구조부재의 내화시험방법 - 일반 요구사항 KS F 2257-1 건축구조부재의 내화시험방법 - 수평 내력 구획 부재의 성능조건 KS F 2257-5
  3. 건축구조부재의 내화시험방법 - 보의 성능 조건 KS F 2257-6
  4. 김도현, 주영규, 천성철, 김대영, 정광량, 김상대, iTECH System 전단강도에 대한 실험적 평가, 대한건축학회 춘계 학술발표대회 논문집(구조계), 22권 n.1 pp. 127-130, 2002-04
  5. 권인규, 지남용, 이세현, 철골 기둥 및 보부재의 허용온도에 관한 실험적 연구, 대한건축학회 논문집 구조계, 18권 10호, pp. 45-52, 2002. 11
  6. 김흥렬, 이세현, 강구조의 내화특성 평가를 위한 강재 허용온도기 준 및 구조형태의 개선방안 연구, 대한건축학회 논문집 구조계, 18권 3호, pp. 11-20, 2002. 03
  7. 대우건설, 김상대, 동양구조안전기술, 해성기공, 층고절감형 iTECH 합성보 / 기념세미나6 : 건설업체 신기술 발표회 대한건축학회 학술발표대회(창립60주년 기념) 논문집, 25권 n.1, pp. 25-51, 2005-10
  8. 민정기, 강석원, 김명한, 김상대, i-TECH보의 내화성능에 대한 해석적 평가, 대한건축학회 논문집 구조계, 18권 10호, pp. 37-46, 2005. 07
  9. 정재오, 김도현, 주영규, 이재홍, 김상대, 유한요소해석을 통한 iTECH의 전단 성능에 관한 해석적 연구, 대한건축학회 추 계학술발표대회 논문집(구조계), 23권 n.2, pp. 159-162, 2003-10
  10. 주영규, 김도현, 정광량, 김상대, iTECH 시스템의 전단성능에 대한 실험적 연구 / An Experimental Study on Shear Capacity of iTECH System, 대한건축학회 논문집, 19권 n.5, pp. 27-34, 2003-05
  11. 천성철, 주영규, 정광량, 김상대, 비대칭 유공 합성보 iTECH beam의 휨성능평가, 대한건축학회 논문집, 18권 n.4, pp.67-74, 2002-04
  12. 최승관, 김성배, 이창남, 김상섭, 김흥열, 신현준 (2005) TSC 보 내화성능에 관한 수치해석적 연구, 대한건축학회 학술발 표대회(창립60주년 기념) 논문집, 대한건축학회, 제 25권, 제 1호, pp. 551-554
  13. 한상훈, 이상호, 고온을 받는 철근 콘크리트 보 및 기둥 부재의 강도저하에 관한 실험적 연구, 대한건축학회 논문집 구조계, 18권 10호, pp. 3-12, 2004. 07
  14. 한상훈, 이상호, 열응력을 고려한 철근콘크리트 부재의 고온시 휨 강도에 관한 연구, 대한건축학회 논문집 구조계, 20권 11 호, pp. 59-66, 2004. 11
  15. A.M. Allam, I.W. Burgess, R.J. Plank, PERFORMANCE - BASED SIMPLIFIED MODEL FOR A STEEL BEAM AT LARGE DEFLECTION IN FIRE, Proc. 4th International Conference on Performance-Based Codes and Fire Safety Design Methods, Melbourne, Australia, (2002)
  16. A. Abbasi and P.J. Hogg, Fire Testing of Concrete Beams With Fibre Reinforced Plastic Rebar, Queen Mary, University of London, Department of Materials, London E1 4NS
  17. Andrew H. Buchanan, Structure Design for Fire Safety, John Wiley & Son . LTD, 2001. 05
  18. ISO 834-1 (1999) Fire resistance tests - Elements of building construction and materials
  19. Ju, Young-Kyu Kim, Do-Hyun; Kim, Sang-Dae, Experimental assessment of the shear strength of an asymmetric steel composite beam with web openings, Canadian Journal of Civil Engineering, Volume 32, Number 2, 1 April 2005, pp. 314- 328(15) https://doi.org/10.1139/l04-094
  20. Zhongcheng Ma, Pentti Ma¨kela¨inen, Behavior of Composite Slim Floor Structures In Fire, Journal of Structure Engineering, Volume 126, Issue 7, pp. 830-837 July 2000 https://doi.org/10.1061/(ASCE)0733-9445(2000)126:7(830)
  21. BS476 : Part20 Fire tests on building materials and structures, BSI