대한인간공학회지 (Journal of the Ergonomics Society of Korea)

  • 제25권3호
  • /
  • Pages.61-66
  • /
  • 2006
  • /
  • 1229-1684(pISSN)
  • /
  • 2093-8462(eISSN)
대한인간공학회 (Ergonomics Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

자동차 조립공정에 대한 작업자세 평가도구의 비교

Comparison of Evaluation Tools of Work Posture in Automobiles Assembly Process

  • 서승록 (대구대학교 자동차.산업.기계공학부)
  • Seo, Seung‐Lock (School of Automative, Industrial & Mechanical Engineering, Daegu University)
  • 발행 : 2006.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Awkward work postures in workshop highly affect on work-related musculoskeletal disorders(WMSDs). Especially, in automobiles assembly process, these awkward work postures of workers may cause serious injury and illness. This study is to compare the performance among the evaluation tools which can measure the work-loads caused by the awkward work postures in automobiles assemble process. RULA, REBA and TVAL(Toyota Verification of Assembly Line) are used as the evaluation tools. The 85 jobs selected in the automobiles assembly process are applied to the three tools and their performances are analyzed after the evaluation of the work-load in each job. Through various measures of performance such as statistical test, DUNCAN test, regression test etc., the tendencies and characteristics among them are analyzed in detail.

키워드

참고문헌

  1. Brogmus, G. E., Sorock, G. S. and Webster, B. S., Recent trends in workrelated cumulative trauma disorders of the upper extremities in the United States: An evaluation of possible reasons, Journal of Occupational & Environmental Medicine, 38(4), pp401-411, 1996 https://doi.org/10.1097/00043764-199604000-00019
  2. Chaffin, D. B., Anderson, G. B. J. and Martin, B. J., Occupational Biomechanics(3rd Ed.), John Wiley & Sons, New York, 1999
  3. Engstrom, T., Hanse, J. J. and Kadefors, R., Musculoskeletal symptoms due to technical preconditions in long cycle time work in an automobile assembly plant: a study of prevalence and relation to psychosocial factors and physical exposure, Applied Ergonomics, 30, pp443-453, 1999 https://doi.org/10.1016/S0003-6870(98)00059-3
  4. Hignett, S. & McAtammy, L., Rapid Entire Body Assessment(REBA), Applied Ergonomics, 31, pp201-205, 2000 https://doi.org/10.1016/S0003-6870(99)00039-3
  5. http://www.bls.gov/
  6. Iritani, T., Koide, I. and Sugimoto, Y., Strategy for health and safety management at an automobile company from the prevention of low back pain to Toyota's Verification of Assembly Line(TVAL), Industrial Health, 35(2), pp249-258, 1997 https://doi.org/10.2486/indhealth.35.249
  7. Karhu, O., et al., Correcting Working Postures in Industry: A practical method for analysis, Applied Ergonomics, 8(4), pp199-201, 1977 https://doi.org/10.1016/0003-6870(77)90164-8
  8. McAtamney, L. & Corlett, E. N., RULA: a survey method for the investigation of work-related upper limb disorders, Applied Ergonomics, 24(2), pp91-99, 1993 https://doi.org/10.1016/0003-6870(93)90080-S
  9. OSHA, Ergonomics Program: Final Rule(29 CFR Part 1910), Dept. of Labor, Occupational Safety and Health Administration, Federal Register, 65(220), 2000
  10. Putz-Anderson, V., Cumulative trauma disorders: A manual for musculoskeletal diseases of the upper limbs, Taylor & Francis: London, 1988
  11. World Health Organization(WHO), Health and environment in sustainable development: Five years after the earth summit, Geneva, 1997
  12. 기도형, 박기현, 작업자세 평가 기법 OWAS, RULA, REBA 비교, 한국안전학회지, 20(2), pp127-132, 2005
  13. 노동부, 산업재해 분석, 2005
  14. 이인석, 정민근, 최경임, 지각불편도를 이용한 관찰적 작업자세 평 가 기법의 비교, 대한인간공학회지, 22(1), pp43-56, 2003

피인용 문헌

  1. Development and Application of a Checklist for Analysis of Non-repetitive Work in Construction Industry vol.29, pp.3, 2010, https://doi.org/10.5143/JESK.2010.29.3.321