$AB_5$계 수소저장합금의 Zr, Ti 및 V 첨가에 따른 전기화학적특성

Electrochemical properties of $AB_5$-type Hydrogen alloys upon addition of Zr, Ti and V

  • 김대환 (전남대학교 신소재공학부) ;
  • 조성욱 (한국지질자원연구소) ;
  • 정소이 (전남대학교 신소재공학부) ;
  • 박충년 (전남대학교 신소재공학부) ;
  • 최전 (한려대학교)
  • Kim, D.H. (Dep,t of materials Science Engineering, Chonnam national University) ;
  • Cho, S.W. (Minerals and Materials Processing Research Division, Korea Institute of Geoscience and Mineral Resources) ;
  • Jung, S.R. (Dept of materials Science Engineering, Chonnam national University) ;
  • Park, C.N. (Dept of materials Science Engineering, Chonnam national University) ;
  • Choi, J. (Department of Advanced Material Engineering, Hanlyo University)
  • 발행 : 2006.03.15

초록

There are two types of metal hydride electrodes as a negative electrode in a Ni-MH battery, $AB_2$ Zr-based Laves phases and $AB_5$ LM(La-rich mischmetal)-based alloys. The $AB_5$ alloy electrodes have characteristic properties such as a large discharge capacity per volume, easiness in activation, long cycle life and a low cost of alloy. However they have a relatively small discharge capacity per weight. The $AB_2$alloy electrodes have a much higher discharge capacity per weight than $AB_5$ alloy electrodes, however they have some disadvantages of poor activation behavior and cycle life. Therefore, in order to improve the discharge capacity of the $AB_5$ alloy electrode the Zr, Ti and V which are the alloying elements of the $AB_2$ alloys were added to the $LaNi_{3.6}Ai_{0.4}Co_{0.7}Mn_{0.3}$ alloy which was chosen as a $AB_5$ alloy with a high capacity. The addition of Zr, Ti and V to $LaNi_{3.6}Ai_{0.4}Co_{0.7}Mn_{0.3}$ alloy improved the activation to be completed in two cycles. The discharge capacities of Zr 0.02, Ti 0.02 and V 0.1 alloys in $LaNi_{3.6}Ai_{0.4}Co_{0.7}Mn_{0.3}M_y$ (M = Zr, Ti, V) were respectively 346, 348 and 366 mAh/g alloy. The alloy electrodes, Zr 0.02, Ti 0.05 and V 0.1 in $LaNi_{3.6}Ai_{0.4}Co_{0.7}Mn_{0.3}M_y$ (M = Zr, Ti, V), have shown good cycle property after 200 cycles. The rate capability of the $LaNi_{3.6}Ai_{0.4}Co_{0.7}Mn_{0.3}M_y$ (M = Zr, Ti, V) alloy electrodes were very good until 0.6 C rate and the alloys, Zr 0.02, Ti 0.05 and V 0.1, have shown the best result as 92 % at 2.4 C rate. The charge retention property of the $LaNi_{3.6}Ai_{0.4}Co_{0.7}Mn_{0.3}M_y$ (M = Zr, Ti, V) alloys was not good and the alloys with M content from 0.02 to 0.05 showed better charge retention properties.

키워드

참고문헌

  1. H. Ishikawa and T.Sakai, 鐵鋼, Vol. 2, 1989, p.48
  2. T. Sakai et al, J.Less-common metals., Vol. 131, 1987, p. 311 https://doi.org/10.1016/0022-5088(87)90530-3
  3. H.Sawa and s. wakao, Mat. Trans. JIM, Vol. 31, 1990, p.487 https://doi.org/10.2320/matertrans1989.31.487
  4. 若尾嗔二郞 水素吸藏合金 1993, pp. 22-23
  5. J.M. Park and J.Y. Lee, Mat, Res. Bull., Vol. 22, 1987 p. 455 https://doi.org/10.1016/0025-5408(87)90255-8
  6. H. Ishikawa, K. Oguro, A. Kato, H. Suzuki and E. Ishii, J Less Common Metals, Vol. 120, 1986, p.123 https://doi.org/10.1016/0022-5088(86)90634-X
  7. T. Sakai, H. Ishikawa, K. Oguro, C. Iwakura and H. Yoneyama, J.Electrochem. Soc. Vol. 134, No.3 , 1987, p. 558 https://doi.org/10.1149/1.2100509
  8. C. N. Park and R. Kirchheim, J of Alloys and Compounds, Vol. 182 1992, pp. 321-330 https://doi.org/10.1016/0925-8388(92)90606-A
  9. Choong-Nyeon Park, Min-Ho Chang, J. of Alloys and Compounds, Vol. 231, 1995, pp. 846-851 https://doi.org/10.1016/0925-8388(95)01770-4
  10. Chan-Yeol Seo, Seung-Jun Choi, Jeon Choi, Choong-Nyeon Park, Paul. S Lee and JaiYoung Lee, nternational Journal of Hydrogen Energy, Vol. 28, Issue 3, March 2003, pp. 317-327 https://doi.org/10.1016/S0360-3199(02)00079-4