효소처리한 도공지의 인쇄적성에 관한 연구

The Study of the Printability Coated Paper by the Enzyme Treatment

  • 김창근 (강원대학교 창강 제지 기술 연구소) ;
  • 양이석 (중부대학교 공과대학 인쇄미디어학과) ;
  • 김병현 (중부대학교 공과대학 인쇄미디어학과)
  • Kim, Chang-Keun (Changgang Institute of Paper Science and Technology, Kangwon National University) ;
  • Yang, Eu-Seok (Dept. of printing media, College of Engineering, Joongbu University) ;
  • Kim, Byong-Hyun (Dept. of printing media, College of Engineering, Joongbu University)
  • 발행 : 2006.03.01

초록

We investigated the effects of the enzyme treatment of fiber for printability of coated paper. The results could summarized as follows, 1. The samples with enzyme treatment (average 87.8%) have higher ink gloss than the blank (85.6%). Printed density showed same trends with the ink gloss. However, the ${\beta}$-Glucosidase treated sample showed the lowest printed density (2.14 %) due to the lowest thickness of the ink layer, which is influenced by coated weight and surface smoothness. 2. The samples whose base paper was Xylanase and ${\beta}$-Glucosidase treated showed higher surface strength (4.2% and 4.0%, respectively) than the blank while the samples with the Hernicellulase and ${\beta}$-Glucuronidase treatment showed lower surface strength (3.2%and 3.7%, respectively) due to the influence of air permeability. 3. Hemicellulase and ${\beta}$-Glucuronidase treated base paper, which have relatively low air permeability, showed better ink repellence (4.3 and 4.4 %, respectively) than the blank (3.8 %). 4. The blank and the Xylanase treated base paper showed high set-off, which is the last category of printability.

키워드