Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Bursting Properties of Short-Fiber Reinforced Chloroprene Rubber

단섬유 강화고무의 파열특성 연구

  • 류상렬 (영남대학교 기계공학부 연구원) ;
  • 이동주 (영남대학교 기계공학부)
  • Published : 2006.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

The bursting properties under various conditions were investigated to ascertain the optimum conditions to yield the best properties. Fiber aspect ratio (AR: length of fiber/diameter of fiber), interphase condition and fiber content were considered as variables which impact the bursting pressure, bulge constant, torsional rigidity ratio. The bursting pressure of reinforced rubber increases up to 8.73 times compared to the virgin material. The better interphase condition shows the higher bursting pressure at given AR and fiber content. The bulge constant and torsional rigidity highly decrease with increasing AR and better interphase condition at same fiber content. The bulge constant and torsional rigidity reveal the minimum of 11% and 0.6% of the matrix, respectively. The bursted shape after test shows the different patterns between unfilled and reinforced rubbers. The case of virgin rubber shows a radiating shape while that of reinforced rubber shows a fluctuating straight line. Overall, it was found that the fiber AR and interphase condition have an important effect on bursting properties.

Keywords

References

  1. Coran, A. Y., Boustany, K. and Hamed, P., 1974, 'Short-Fiber Rubber Composites,' Rubber Chem. Technol., Vol. 47, p. 396 https://doi.org/10.5254/1.3540449
  2. Goettler, L. A., 1988, Hand Book of Elastomers, Marcel Dekker, Inc., pp. 216-244
  3. Lee, D. J. and Ryu, S. R., 1999, ICCM12, Paris, No. 226
  4. Ryu, S. R. and Lee, D. J., 2000, 'The Influence of Interphase Condition on Mechanical Properties of Short-fiber Reinforced Rubber,' J. of the Korean Society of Mechanical Engineers(A), Vol. 24, No. 3, pp. 625-633
  5. Ryu, S. R. and Lee, D. J., 2001, 'Effects of Short-fiber End Shape on Tensile Properties of Reinforced Rubber,' J. of the Korean Society of Mechanical Engineers(A), Vol. 25, No. 6, pp. 1023-1030
  6. Ryu, S. R. and Lee, D. J., 1999, 'The Influence of Interphase Condition and Fiber Content on the Tensile Properties of Short-fiber Reinforced Rubber,' Proceedings of the KSME Fall Annual Meeting '99, pp. 172-177
  7. Ryu, S. R. and Lee, D. J., 1998, 'The Influence of Aspect Ratio on Tensile and Tear Properties of Short-fiber Reinforced CR', Proceedings of the KSME Spring Annual Meeting '98, pp. 90-95
  8. Abdel-Rahman A. F. R. and Salah Eldin A. B., 1999, Engineering Solid Mechaincs, Florida, CRC Press, pp. 749-754
  9. Ugural, A. C. and Fenster, S. K., 2003, Advanced Strength and Applied Elasticity, 4th Edition, Prentice Hall, pp. 251-253