Carbon letters
- Volume 7 Issue 4
- /
- Pages.241-244
- /
- 2006
- /
- 1976-4251(pISSN)
- /
- 2233-4998(eISSN)
Study on the Fabrication and the Properties of C/C Composite from Clutter Chopped Carbon Fiber by Warmer-Molding Technology
- Chen, Jianxun (State Key Laboratory of Powder Metallurgy, Central South University) ;
- Huang, Qizhong (State Key Laboratory of Powder Metallurgy, Central South University)
- Received : 2006.11.03
- Accepted : 2006.12.15
- Published : 2006.12.30
Abstract
Carbon/Carbon composite was been manufactured by the technology of warmer-molding process of clutter chopped carbon fiber, using phenolic resin as an adhesive. The degree of graphitization, the microstructure and the friction properties were studied. The results show that the clutter chopped carbon fiber fully scatter in the Carbon/Carbon composite and the degree of graphitization of phenolic resin can reach up to 86.2%, this matrix carbon can form the continuous and stable graphitic thin film on the friction surface during braking process so that the composite has fine friction properties and low wear rate.