기능성 작업복의 인간공학적 평가 - 방염복을 중심으로 -

Ergonomic Evaluation of Functional Working-Clothes - Focused on Flame-Proof Clothing -

  • 김희은 (경북대학교 의류학과) ;
  • 연수민 (경북대학교 의류학과) ;
  • 정정림 (경북대학교 의류학과) ;
  • 이민정 (포항공과대학교 산업경영공학과) ;
  • 장준호 (포항공과대학교 산업경영공학과) ;
  • 유희천 (포항공과대학교 산업경영공학과)
  • Kim, Hee-Eun (Dept. of Clothing & Textiles, Kyungpook National University) ;
  • Yeon, Soo-Min (Dept. of Clothing & Textiles, Kyungpook National University) ;
  • Jeong, Jeong-Rim (Dept. of Clothing & Textiles, Kyungpook National University) ;
  • Lee, Min-Jeong (Dept. of Industrial & Management Engineering, Pohang Institute of Science and Technology) ;
  • Chang, Joon-Ho (Dept. of Industrial & Management Engineering, Pohang Institute of Science and Technology) ;
  • You, Hee-Cheon (Dept. of Industrial & Management Engineering, Pohang Institute of Science and Technology)
  • 투고 : 2006.03.07
  • 발행 : 2006.10.31

초록

This study was aimed to find out the problems of wearing flame-proof clothing and to analytically assess functional working-clothes, thus to propose a new design. We carried out a questionnaire with workers in the field and evaluated the facility for wearing, the sensation of wearing and clothing microclimate in the environmental chamber. We found out the problems were in the parts of neck, armpits, armhole, sleeve, crotch and suspenders. Thermal sensation, wet sensation and comfort sensations were evaluated to be 'hot', 'wet' and near to discomfort', respectively. Therefore, improvement of movement and air permeability is needed. If we can add gusset on armpit for air permeability, this gusset will enable to enlarge the surface in armpit area and finally give a movement efficiency. We suggested several new partly modified design for flame-proof clothing which can be applied to other protective clothing for improvement. This must be further considered in the ergonomic evaluation of new proposed functional working-clothes as well as in the suggestion of design.

키워드

참고문헌

  1. 박소진 . 김희은 (2002) 서열환경하에서 안전모 착용시의 인체생리학적 반응. 한국의류산업학회지, 26(1), 74-82
  2. 방창훈 . 이진호 . 예용택 (2002) 복사열에 노출된 작업복의 열적특성에 관한 실험적 연구. 산업안전학회지, 17(3), 56-60
  3. 유화숙.김은애 (1996) 의복재료와 개구부 요인이 의복 내 미세기후에 미치는 영향력비교. 한국의류학회지, 20(6), 1084-1095
  4. 이윤정 . 정찬주 . 정재은 (2002a) 반도체 산업 환경에서의 방진복 디자인의 개발. 한국의류학회지, 26(2), 337-348
  5. 이윤정 . 정찬주 . 정재은 (2002b) 고청정 작업환경에서 방진복 디자인이 인체 생리반응에 미치는 영향. 한국의류학회지, 26(6), 811-820
  6. 홍성애 (2004) 특수 기능복 개발을 위한 국제 규격 적용과 평가. 한국생활환경학회지, 11(1), 1-14
  7. 岡部和代.山名信子 (1991) ボディス-ツ着用による寸法變化と壓迫感. 日本纖維製品消費科學會誌, 32(2), 72-78
  8. Ashdown S.P. and Watkins S.M. (1996) Concurrent engineering in the design of protective clothing: interfacing with equipment design, in Johnson, J.S. and Mansdorf, S.Z. (Eds.), Performance of Protective Clothing, ASTM : PA
  9. Havenith G. and Heus R. (2004) A test battery related to ergonomics of protective clothing. Applied Ergonomics, 35, 3-20 https://doi.org/10.1016/j.apergo.2003.11.001
  10. Huck J. (1988) Protective clothing system: A technique for evaluating restriction of wearer mobility. Applied Ergonomics, 19(3), 185-190 https://doi.org/10.1016/0003-6870(88)90136-6
  11. Huck J., Maganga O. and Kim Y. (1997) Protective overalls: evaluation of garment design and fit. International Journal of Clothing Science and Technology, 9(1), 45-61 https://doi.org/10.1108/09556229710157876
  12. Kinderknecht, R. (1994) A statewide survey of the protective clothing used by Kansas volunteer fire departments. Unpublished master's report, Kansas State University, Manhattan, K.S.
  13. Kim Y. (2002) A functional design of fire fighter coveralls. Journal of the Korean Society of Clothing and Textiles, 26(12), 1739-1748
  14. Stephen S.C. and McLellan T.M. (1998) Influence of hydration status and fluid replacement on heat tolerance while wearing NBC (nuclear, biological and chemical) protective clothing. European Journal of Applied Physiology, 77, 139-148 https://doi.org/10.1007/s004210050312
  15. Tokura, H. and Midorikawa, T. (1985) Effect of hydroscoically treated polyester blouses on sweating rates of sedentary women at 33$^{\circ}C$ . Textile Research Journal, 55, 178-180 https://doi.org/10.1177/004051758505500308