Journal of electromagnetic engineering and science

  • 제6권2호
  • /
  • Pages.110-116
  • /
  • 2006
  • /
  • 2671-7255(pISSN)
  • /
  • 2671-7263(eISSN)
한국전자파학회 (The Korean Institute of Electromagnetic Engineering and Science)
권호 표지

Design and Fabrication of Reflective Array Type Wideband SAW Dispersive Delay Line

  • 발행 : 2006.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A reflective array type surface acoustic wave(SAW) dispersive delay line(DDL) with high time-bandwidth at the V/UHF-band is designed and fabricated for compressive receiver applications. This type of the SAW DDL has the properties of the relative bandwidth of 20 %, the time delay of 49.89 usec, the insertion loss of 38.5 dB and the side lobe rejection of 39 dB. In comparison with a commercial SAW DDL, the insertion loss, amplitude ripple and side lobe rejection are improved by $1.5dB{\pm}0.6dB$ and 4 dB respectively. Using the fabricated SAW DDL, the prototype of the compressive receiver is developed. It is composed of RF converter, fast tunable LO, chirp LO, A/D converter, signal processing unit and control unit. This prototype system shows a fine frequency resolution of below 30 kHz with high scan rate.

키워드

참고문헌

  1. D. L. Adamy, EW101: A First Course in Electronic Warfare, Artech House, pp. 49-71, 2000
  2. A. Pohl, C. Posch, L. Reindl, and F. Seifert, 'Digitally controlled compressive receiver', IEEE 4th Int'l, Symp. Spread Spectrum Technique and Applications, vol. 1, pp. 409-413, Sep. 1996
  3. W. E. Snelling, E. Geraniots, 'Analysis of compressive receiver for the optimal interception of frequency-hopped waveforms', IEEE Trans. Microwave Theory and Tech., vol. 42, no. 1, pp. 127-138, Jan. 1994 https://doi.org/10.1109/22.265539
  4. J. B-Y. Tsui, Microwave Receivers with Electronic Warfare Applications, John Wiley & Sons, pp. 278-328, 1986
  5. W. G. Lyons, D. R. Arsenault, A. C. Anderson, T. C. L. G. Sollner, P. G. Murphy, M. M. Seaver, R. R. Boisvert, R. L. Slattry, and R. W. Ralston, 'High temperature superconductive wideband compressive receivers', IEEE Trans. Microwave Theory and Tech., vol. 44, no. 7, pp. 1258-1278, Jul. 1996 https://doi.org/10.1109/22.508231
  6. J. L. Thoss., 'Improved time-sidelobe performance in SAW RAC's using laser aided phase compensation', IEEE Ultrasonic Symp., pp. 179-184, 1988
  7. R. C. Williamson, H. I. Smith, 'The use of surfaceelastic-wave reflection gratings in large time-bandwidth pulse-compression filters', IEEE Trans. Microwave Theory Tech., vol. MTT-21, no. 4. pp. 195-205, Apr. 1973
  8. S. Datta, Surface Acoustic Wave Devices, Prentice-Hall, Englewood Cliffs, 2000
  9. K. Y. Hashimoto, Surface Acoustic Wave Devices in Telecommunications(Modeling and Simulation), Prentice-Hall, Englewood Cliffs, pp. 85-138, 1986
  10. RD T005E Dispersive Delay Line (Preliminary Specification), TEMEX Company, France, 2004
  11. J. S. Levy, P. J. Burke, and R. Cechini, 'VCO based chirp generation for broad bandwidth compressive receiver applications', IEEE MTT-S. Microwave Symp. Dig., vol. 2, no. EE-6, pp. 1113-1115, 1993