Journal of the Korea Concrete Institute (콘크리트학회논문집)

Korea Concrete Institute (한국콘크리트학회)
권호 표지
DOI QR코드

DOI QR Code

Flexural Behaviors of PSC Composite Girders in Positive Moment Regions

콘크리트 충전 강관을 갖는 프리스트레스트 합성거더의 정모멘트 구간 거동

  • Published : 2006.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Prestressed composite girder with concrete infilled steel tubes(PSC-CFT girder) is new type of bridge girder which enhances the resisting capacities due to the double composite action of PSC composite girder and concrete infilled tube. The flexural behaviors of PSC-CFT girder in the positive moment regions are investigated based on the experimental observations recently performed on two of 4.4m long specimens. The mechanical and structural roles and failure mechanism of the composite action are discussed through comparing the test results with those numerically predicted by the three methods of one- and three-dimensional nonlinear finite element analyses, and section analysis method.

콘크리트 충전 강관을 갖는 프리스트레스트 합성거더(PSC-CFT girder)는 PSC 합성거더와 콘크리트 충전 강관의 이중합성작용으로 인하여 구조물의 저항능력을 증대시킨 새로운 개념의 교량형식이다. 정모멘트 구간에서 콘크리트 충전 강관을 갖는 합성거더의 휨 거동은 지간장 4.4m인 2개의 실험체를 제작하여 수행한 실험결과로부터 분석하였다. 보요소를 사용한 비선형 유한요소해석, 3차원 비선형 유한요소해석 및 단면해석법에 의해 예측된 수치해석결과와 실험결과의 비교를 통해 PSC 합성거더와 콘크리트 충전 강관의 합성작용에 대한 역학적 및 구조적 역할과 파괴메커니즘을 비교하였다.

Keywords

References

  1. Dischinger, F., 'Composite Steel Bridges Prestressed by High Strength Cables', Der Bauingenieur, No. 11, 1949, pp.321-322
  2. Tochacek, M. and Mehta, C. L., 'Economical Design of Prestressed Plate Girder', Journal of the Structural Division, ASCE, Vol.98, No.6, 1972, pp.1273-1289
  3. Saadatmanesh, H., Albrecht, P. and Ayyub, B. M., 'Experimental Study of Prestressed Composite Beams', Journal of Structural Engineering, ASCE, Vol.115, No.9, 1989, pp.2349-2364
  4. Saadatmanesh, H., Albrecht, P., and Ayyub, B. M., 'Analytical Study of Prestressed Composite Beams', Journal of Structural Engineering, ASCE, Vol.115, No.9, 1989, pp.2364-2381 https://doi.org/10.1061/(ASCE)0733-9445(1989)115:9(2364)
  5. Popovics, S., 'A Numerical Approach to the Complete Stress-Strain Curves or Concrete', Cement and Concrete Research, Vol.3, No.5, 1973, pp.583-599 https://doi.org/10.1016/0008-8846(73)90096-3
  6. Mander, J. B., Priestly, J. N., and Park, R., 'Theoretical StressStrain Model for Confmed Concrete', Journal of Structural Engineering, ASCE, Vol.114, No.8, 1988, pp.1804-1826 https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  7. Lodygowski, T. and Szumigala, M., 'Engineering Models for Numerical Analysis of Composite Bending Members', Mechanics of structures and machines, Vol.20, No.3, 1992, pp.363-380 https://doi.org/10.1080/08905459208905173
  8. Mattock, Alan H., 'Flexural Strength of Prestressed Concrete Sections by Programmable Calculator', PCI Journal, Vol.24, No.1 Jan.-Feb., 1979, pp.32-54
  9. Willam, K. and Warnke, P., 'Constitutive Model for Triaxial Behavior of Concrete', Seminar Concrete Structures Subjected to Triaxial Stresses, ISMES, Bergamo, Italy, May 1974, IABSE-Report No. III, 1974, pp.1-30
  10. 이용학, '콘크리트 3차원 구성모델을 위한 네 계수 파괴 포락선의 개발', 대한토목학회 논문집, Vol. 19, No. I-1, 1999, pp.79-88

Cited by

  1. Interface Behavior of Concrete Infilled Steel Tube Composite Beam vol.18, pp.5, 2014, https://doi.org/10.11112/jksmi.2014.18.5.009