DOI QR코드

DOI QR Code

The Quality of Crushed Sand by Dry Production Process and Its Influence on Properties of Concrete

건식공정으로 생산한 부순 모래의 품질 및 콘크리트 특성에 미치는 영향

  • Park, Cho-Bum (Research & Development Division, Eugene Corporation Co. Ltd.) ;
  • Baek, Chul-Woo (Research & Development Division, Eugene Corporation Co. Ltd.) ;
  • Kim, Ho-Su (Research & Development Division, Eugene Corporation Co. Ltd.) ;
  • Ryu, Deuk-Hyun (Research & Development Division, Eugene Corporation Co. Ltd.)
  • Published : 2006.06.30

Abstract

As the shortage of natural & good quality aggregate for concrete, it is needed development of alternative aggregate. At the present time, the crushed sand is widely used among the alternation aggregate, and the usage of crushed sand will be increased more and more. Generally, crushed sud is produced with wet process in domestic, but some manufacturing companies which are handicapped with local restrict are produced by dry process. In this study, analyzing the facilities of dry crushed sand, the quality properties of dry crushed sand was done by Korean Industrial Standards. Based on the quality results of dry crushed sand, the experiment of concrete with the dry crushed sand which is substitute for sea sand was done. As the results of basic qualities, the amount of 0.08 mm sieve passing ratio was over KS criteria, and the fineness modulus was higher than sea sand, and the other physical properties of dry crushed sand was similar to sea sand. The results of concrete experiment, according to the substitutive ratio of dry crushed sand is increased, the slump and air content of concrete was decreased by increase of fine particles of dry crushed sand, and the unit weight content, compressive & tensile strength of concrete were increased on the contrary. The physical properties of concrete used dry crushed sand were showed same tendency without relation to W/B. Consequently, if the fine particle contents of dry crushed sand was lower, it is judged that dry crushed sand is no problem to use for concrete aggregate and the amount of usage will be increased.

콘크리트용 골재로 양질의 골재가 부족함에 따라 대체 골재의 개발이 요구되어, 현재에는 대체 골재로서 부순모래가 가장 많이 사용되고 있으며, 그 사용량은 더욱 늘어날 전망이다. 국내에서는 대부분의 회사가 습식공정으로 부순모래를 생산하지만, 지역적인 조건과 부지의 제약에 의해서 건식 공정으로 부순모래를 생산하는 회사도 있다. 본 연구에서는 건식 공정 부순모래의 콘크리트의 적용성을 평가하기 위한 기초적인 연구로서, 건식공정으로 부순모래를 생산하고 있는 회사의 제조 설비를 분석하고, 부순모래를 대상으로 한국산업규격에 의거하여 품질특성 시험을 실시하였으며, 그 결과를 바탕으로 부순모래를 바다모래에 대체하여 콘크리트 실험을 실시하였다. 실험 결과, 건식 부순모래 품질 특성 중에서 0.08mm 체 통과량이 KS 규정을 초과하였으며, 조립률도 천연모래에 비하여 다소 높게 나타났고, 다른 물리적 특성은 바다 모래와 유사하였다. 콘크리트 실험에서는 부순모래의 대체율이 증가함에 따라 슬럼프와 공기량이 미립분량 증가에 의해서 감소하였으며, 단위용적질량, 압축강도, 인장강도는 증가하는 것으로 나타났다. 따라서 건식 부순모래의 미립분 함유량을 감소시키면 콘크리트용 골재로서 사용하는 데에는 큰 문제가 없을 것으로 판단되며, 향후 건식공정으로 생산한 부순모래의 사용량도 증대될 것으로 전망된다.

Keywords

References

  1. 건설교통부, 연도별 골재원별 골재 채취허가 및 채취실적 통계자료, http://www.moct.go.kr. 2005
  2. 건설교통부, 한국건설교통기술평가원, 대체골재를 사용한 콘크리트의 고품질화 기술 개발, 2003 건설기술기반 구축사업 제 1차년도 연차보고서, 03기반기술 A03, 한국 건설기술연구원, 2004, pp.42-45, 67
  3. 이성복, '잔입자 함유량 및 잔골재 입형 변화에 따른 부순모래 콘크리트의 특성에 관한 연구', 한양대학교 대학원 박사학위논문, 1997, pp.15-16
  4. 유승업 외, '부순 잔골재의 미립분량이 콘크리트의 품질에 미치는 영향', 대한 건축학회 창립 60주년기념 학술발표대회논문집, 제25권, 제1호, 2005. 10, pp.313-316
  5. 전성태, '미립분 함유량에 따른 부순모래 콘크리트의 물성에 관한 실험적 연구', 대구대학교 대학원 석사학위논문, 1999, pp.58-59
  6. A. M. Neville, Properties of Concrete, Fourth and Final Edition, Longman, London, 1996, pp.308-311