Compliance Analysis of Constrained Spatial Flexible Manipulators

구속받는 3차원 유연 매니퓰레이터의 컴플라이언스 해석

  • 김진수 (전주대학교 기계자동차공학과)
  • Published : 2006.06.01

Abstract

The aim of this paper is to clarify the structural compliance of the constrained spatial flexible manipulator and to develop the force control by using the compliance of the links. Using the dependency of elastic deflections of links on contact force, vibrations for constrained vertical motion have been suppressed successfully by controlling the position of end-effector. However, for constrained horizontal motion, the vibrations cannot be suppressed by only controlling position of end-effector. We present the experimental results for constrained vertical motion, and constrained horizontal motion. Finally, a comparison between these results is presented to show the validity of link compliance.

Keywords

References

  1. Fukuda, T., 1985, 'Flexibility Control of Elastic Robotic Arm,' J. of Robotic Systems, Vol. 2, No. 1, pp. 73-81
  2. Komatsu, T., Uenohara, M., Imura, S., Miura, H. and Shimoyama, I., 1990, 'Compliance Control of Flexible Two-Link Manipulators,' Transactions of the JSME(C), Vol. 56, No. 530, pp. 26422-648
  3. Chiou, B. C. and Shahinpoor, M., 1990, 'Dynamic Stability Analysis of a Two-Link Force-Controlled Flexible Manipulator,' Trans. ASME, J. of Dynamic Systems, Measurement, and Control, Vol. 112, pp. 661-666 https://doi.org/10.1115/1.2896192
  4. Kojima, H. and Kawanabe, T., 1992, 'Position and Force Control of Flexible Robot Arm with PIS Control,' J. Robotics Society of Japan, Vol. 10, No. 3, pp. 353-360 https://doi.org/10.7210/jrsj.10.353
  5. Matsuno, F., Asano, T. and Sakawa, Y., 1994, 'Modeling and Quasi-Static Hybrid Position/Force Control of a Constrained Planar Two-Link Flexible Manipulator,' IEEE Trans. on Robotics and Automation, Vol. 10, No. 3, pp. 287-297 https://doi.org/10.1109/70.294204
  6. Richter, F. and Pfeiffer, F., 1991, 'A Flexible Link Manipulator as a Force Measuring and Controlling Unit,' Proc. of the IEEE Int. Conf. on Robotics and Automation, pp. 1214-1219
  7. Bossert, D., Ly, U. L. and Vagners, J., 1996, 'Experimental Evaluation of Robust Reduced-Order Hybrid Position/Force Control on a Two-Link Flexible Manipulator,' Proc. of the IEEE Int. Conf. on Robotics and Automation, pp. 2573-2578
  8. Kim, J. S., Suzuki, K., Konno, A. and Uchiyama, M., 1996, 'Force Control of Constrained Flexible Manipulators,' Proc. of the IEEE Int. Conf. on Robotics and Automation, pp. 635=640
  9. Yoshikawa, T., Harada, K. and Matsumoto, A., 1996, 'Hybrid Position/Force Control of Flexible Macro/Rigid Micro Manipulator Systems,' IEEE Trans. on Robotics and Automation, Vol. 12, No. 4, pp. 633-639 https://doi.org/10.1109/70.508447
  10. Kim, J. S., Suzuki, K., Yamano, M. and Uchiyama, M., 1997, 'Vibration Suppression Control of Constrained Spatial Flexible Manipulators,' Proc. of the IEEE Int. Conf. on Robotics and Automation, pp. 2831-2837
  11. Yoshikawa, T., 1998, Foundations of Robot Control, Corona Publishing Co., pp. 46-57
  12. Uchiyama, M., Konno, A., Uchiyama, T. and Kanda, S., 1990, 'Development of a flexible dual-arm manipulator test bed for space robotics,' Proc. of the IEEE Int. Workshop on Intelligent Robotics and Systems'90, pp. 375-381