DOI QR코드

DOI QR Code

Development of the Portable Standard System for the Vehicle Detectors' Evaluation

차량검지기 성능평가를 위한 이동식 기준 장비 개발

  • 이상협 (감사원) ;
  • 백남철 (한국건설기술연구원 도로연구부) ;
  • 허운 (한국건설기술연구원 도로연구부)
  • Received : 2005.01.13
  • Accepted : 2005.03.16
  • Published : 2006.05.31

Abstract

Image frame analysis is a conventional way of evaluating loop detector's performance. In image frame analysis, the time to evaluate performance is linearly proportional to the number of evaluated subjects, and the results can be subjective, depending on operator's personal evaluation standards and physical condition. Also, this method is often inferior in accuracy to that provided by the evaluated devices. Therefore, it is critical to develop a portable standard system which has better accuracy and more objectivity in evaluating vehicle detectors. This paper discusses function and reliability of tape-switch detector, which can be a replacement for image frame analysis, for effectively measuring traffic volume, speed, and occupancy.

지금까지 루프검지기의 성능 평가는 영상프레임분석 방법을 이용하고 있다. 그러나, 영상프레임분석은 자료 분석에 소요되는 비용과 소요 시간이 분석대상의 수에 비례하여 증가되며 인력식으로 운영되므로 분석자의 주관의 개입과 분석자의 피로도 상승에 따른 정확도 감소 등 객관성 확보에 상당한 문제를 드러내고 있다. 또한, 이 방법은 시험 대상 장비보다 정확도가 떨어질 수 있어 기준값으로 사용되기에는 문제가 있다. 따라서, 영상프레임분석 방법을 대체하여 수집 교통자료를 실시간으로 그리고 객관적이고 더 정확하게 분석할 수 있는 이동식 기준장비 개발이 요구된다. 본 연구에서는 영상프레임분석 방법을 대체하고 수집된 교통자료를 실시간으로 분석할 수 있는 방안으로서 테이프스위치 검지기를 이용한 교통량, 속도, 점유율 측정 시스템을 개발하여 시스템의 신뢰도 및 현장 적용 여부를 검토하였다.

Keywords

References

  1. 도로교통안전관리공단(1999) 루프검지기 교통량, 속도, 점유율 측정 신뢰도 제고 방안연구
  2. 정낙삼외(1999) 측정불확도 표현 지침, 한국표준과학연구원
  3. 제주시(2002) 제주시 첨단교통모델도시 건설사업 차량검지기 정확도 검수보고서
  4. 한국도로공사(1996) 고속찰영 장비를 이용한 차량검지기 데이터 신뢰도 평가 용역보고서
  5. Tokyo Sensor Co. (2001) Product lriformation for the Tape Switch
  6. Traffic Technology International (1999) Finger on the Pulse Piezos on the Rise, June/July 1999, pp. 53-57
  7. UK Department of Transport, A Road Safety Good Practice Guide, Speed Camera, http://www.roads.dtlr.gov.uk/roadsafety/goodpractice